Openwrt/target/linux/ath79/patches-5.4/0032-MIPS-ath79-sanitize-symbols.patch
Hauke Mehrtens 9ffa2f8193 kernel: Activate FORTIFY_SOURCE for MIPS kernel 5.4
CONFIG_FORTIFY_SOURCE=y is already set in the generic kernel
configuration, but it is not working for MIPS on kernel 5.4, support for
MIPS was only added with kernel 5.5, other architectures like aarch64
support FORTIFY_SOURCE already since some time.

This patch adds support for FORTIFY_SOURCE to MIPS with kernel 5.4,
kernel 5.10 already supports this and needs no changes.

This backports one patch from kernel 5.5 and one fix from 5.8 to make
fortify source also work on our kernel 5.4.

The changes are not compatible with the
306-mips_mem_functions_performance.patch patch which was also removed
with kernel 5.10, probably because of the same problems. I think it is
not needed anyway as the compiler should automatically optimize the
calls to memset(), memcpy() and memmove() even when not explicitly
telling the compiler to use the build in variant.

This increases the size of an uncompressed kernel by less than 1 KB.

Acked-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2021-04-30 23:51:19 +02:00

94 lines
2.2 KiB
Diff

From 3fc8585cf76022dba7496627074d42af88c30718 Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Sat, 23 Jun 2018 15:16:55 +0200
Subject: [PATCH 32/33] MIPS: ath79: sanitize symbols
We no longer need to select which SoCs are supported as the whole arch
code is always built. So lets drop all the SoC symbols
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/mips/Kconfig | 2 ++
arch/mips/ath79/Kconfig | 44 +++++---------------------------------------
arch/mips/pci/Makefile | 2 +-
3 files changed, 8 insertions(+), 40 deletions(-)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -218,6 +218,8 @@ config ATH79
select SYS_SUPPORTS_BIG_ENDIAN
select SYS_SUPPORTS_MIPS16
select SYS_SUPPORTS_ZBOOT_UART_PROM
+ select HAVE_PCI
+ select USB_ARCH_HAS_EHCI
select USE_OF
select USB_EHCI_ROOT_HUB_TT if USB_EHCI_HCD_PLATFORM
help
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -1,48 +1,14 @@
# SPDX-License-Identifier: GPL-2.0
if ATH79
-config SOC_AR71XX
- select HAVE_PCI
- def_bool n
-
-config SOC_AR724X
- select HAVE_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_AR913X
- def_bool n
-
-config SOC_AR933X
- def_bool n
-
-config SOC_AR934X
- select HAVE_PCI
- select PCI_AR724X if PCI
- def_bool n
-
-config SOC_QCA955X
- select HAVE_PCI
- select PCI_AR724X if PCI
+config PCI_AR71XX
+ bool "PCI support for AR7100 type SoCs"
+ depends on PCI
def_bool n
config PCI_AR724X
- def_bool n
-
-config ATH79_DEV_GPIO_BUTTONS
- def_bool n
-
-config ATH79_DEV_LEDS_GPIO
- def_bool n
-
-config ATH79_DEV_SPI
- def_bool n
-
-config ATH79_DEV_USB
- def_bool n
-
-config ATH79_DEV_WMAC
- depends on (SOC_AR913X || SOC_AR933X || SOC_AR934X || SOC_QCA955X)
+ bool "PCI support for AR724x type SoCs"
+ depends on PCI
def_bool n
endif
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o
ops-bcm63xx.o
obj-$(CONFIG_MIPS_ALCHEMY) += pci-alchemy.o
obj-$(CONFIG_PCI_AR2315) += pci-ar2315.o
-obj-$(CONFIG_SOC_AR71XX) += pci-ar71xx.o
+obj-$(CONFIG_PCI_AR71XX) += pci-ar71xx.o
obj-$(CONFIG_PCI_AR724X) += pci-ar724x.o
obj-$(CONFIG_MIPS_PCI_VIRTIO) += pci-virtio-guest.o
obj-$(CONFIG_PCI_XTALK_BRIDGE) += pci-xtalk-bridge.o