Openwrt/target/linux/ath79/patches-5.10/0038-MIPS-ath79-add-missing-QCA955x-GMAC-registers.patch
David Bauer d6b785d477 ath79: add kernel 5.10 support
This adds Kernel 5.10 support for the generic, nand and tiny subtargets.

The following patch is not contained, as it needs to be reworked:
platform/920-mikrotik-rb4xx.patch

Tested-on:
 - Siemens WS-AP3610
 - Enterasys WS-AP3710
 - Aerohive HiveAP 121
 - TP-Link TL-WA901 v2
 - TP-Link TL-WR741 v1

Signed-off-by: David Bauer <mail@david-bauer.net>
2021-02-20 01:26:33 +01:00

91 lines
3.5 KiB
Diff

From 60efe35257b063ce584968f9f80b437030ce6ba6 Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Mon, 18 Mar 2019 00:54:06 +0100
Subject: [PATCH] MIPS: ath79: add missing QCA955x GMAC registers
This adds missing GMAC register definitions for the Qualcomm Atheros
QCA955X series MIPS SoCs.
They originate from the platforms U-Boot code and the AVM FRITZ!WLAN
Repeater 450E's GPL tarball.
Signed-off-by: David Bauer <mail@david-bauer.net>
---
.../mips/include/asm/mach-ath79/ar71xx_regs.h | 54 +++++++++++++++++++
1 file changed, 54 insertions(+)
--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -1246,7 +1246,12 @@
*/
#define QCA955X_GMAC_REG_ETH_CFG 0x00
+#define QCA955X_GMAC_REG_SGMII_RESET 0x14
#define QCA955X_GMAC_REG_SGMII_SERDES 0x18
+#define QCA955X_GMAC_REG_MR_AN_CONTROL 0x1c
+#define QCA955X_GMAC_REG_MR_AN_STATUS 0x20
+#define QCA955X_GMAC_REG_SGMII_CONFIG 0x34
+#define QCA955X_GMAC_REG_SGMII_DEBUG 0x58
#define QCA955X_ETH_CFG_RGMII_EN BIT(0)
#define QCA955X_ETH_CFG_MII_GE0 BIT(1)
@@ -1268,9 +1273,58 @@
#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
+#define QCA955X_SGMII_RESET_RX_CLK_N_RESET 0
+#define QCA955X_SGMII_RESET_RX_CLK_N BIT(0)
+#define QCA955X_SGMII_RESET_TX_CLK_N BIT(1)
+#define QCA955X_SGMII_RESET_RX_125M_N BIT(2)
+#define QCA955X_SGMII_RESET_TX_125M_N BIT(3)
+#define QCA955X_SGMII_RESET_HW_RX_125M_N BIT(4)
+
#define QCA955X_SGMII_SERDES_LOCK_DETECT_STATUS BIT(15)
#define QCA955X_SGMII_SERDES_RES_CALIBRATION_SHIFT 23
#define QCA955X_SGMII_SERDES_RES_CALIBRATION_MASK 0xf
+
+#define QCA955X_MR_AN_CONTROL_SPEED_SEL1 BIT(6)
+#define QCA955X_MR_AN_CONTROL_DUPLEX_MODE BIT(8)
+#define QCA955X_MR_AN_CONTROL_RESTART_AN BIT(9)
+#define QCA955X_MR_AN_CONTROL_POWER_DOWN BIT(11)
+#define QCA955X_MR_AN_CONTROL_AN_ENABLE BIT(12)
+#define QCA955X_MR_AN_CONTROL_SPEED_SEL0 BIT(13)
+#define QCA955X_MR_AN_CONTROL_LOOPBACK BIT(14)
+#define QCA955X_MR_AN_CONTROL_PHY_RESET BIT(15)
+
+#define QCA955X_MR_AN_STATUS_EXT_CAP BIT(0)
+#define QCA955X_MR_AN_STATUS_LINK_UP BIT(2)
+#define QCA955X_MR_AN_STATUS_AN_ABILITY BIT(3)
+#define QCA955X_MR_AN_STATUS_REMOTE_FAULT BIT(4)
+#define QCA955X_MR_AN_STATUS_AN_COMPLETE BIT(5)
+#define QCA955X_MR_AN_STATUS_NO_PREAMBLE BIT(6)
+#define QCA955X_MR_AN_STATUS_BASE_PAGE BIT(7)
+
+#define QCA955X_SGMII_CONFIG_MODE_CTRL_SHIFT 0
+#define QCA955X_SGMII_CONFIG_MODE_CTRL_MASK 0x7
+#define QCA955X_SGMII_CONFIG_ENABLE_SGMII_TX_PAUSE BIT(3)
+#define QCA955X_SGMII_CONFIG_MR_REG4_CHANGED BIT(4)
+#define QCA955X_SGMII_CONFIG_FORCE_SPEED BIT(5)
+#define QCA955X_SGMII_CONFIG_SPEED_SHIFT 6
+#define QCA955X_SGMII_CONFIG_SPEED_MASK 0xc0
+#define QCA955X_SGMII_CONFIG_REMOTE_PHY_LOOPBACK BIT(8)
+#define QCA955X_SGMII_CONFIG_NEXT_PAGE_LOADED BIT(9)
+#define QCA955X_SGMII_CONFIG_MDIO_ENABLE BIT(10)
+#define QCA955X_SGMII_CONFIG_MDIO_PULSE BIT(11)
+#define QCA955X_SGMII_CONFIG_MDIO_COMPLETE BIT(12)
+#define QCA955X_SGMII_CONFIG_PRBS_ENABLE BIT(13)
+#define QCA955X_SGMII_CONFIG_BERT_ENABLE BIT(14)
+
+#define QCA955X_SGMII_DEBUG_TX_STATE_MASK 0xff
+#define QCA955X_SGMII_DEBUG_TX_STATE_SHIFT 0
+#define QCA955X_SGMII_DEBUG_RX_STATE_MASK 0xff00
+#define QCA955X_SGMII_DEBUG_RX_STATE_SHIFT 8
+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_MASK 0xff0000
+#define QCA955X_SGMII_DEBUG_RX_SYNC_STATE_SHIFT 16
+#define QCA955X_SGMII_DEBUG_ARB_STATE_MASK 0xf000000
+#define QCA955X_SGMII_DEBUG_ARB_STATE_SHIFT 24
+
/*
* QCA956X GMAC Interface
*/