Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 939175e9f2 authsae: Use kbit/s as mcast_rate unit like wpad The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s. But when using authsae, the unit for the same option is redefined as Mbit/s. Better use the same unit for this option independent of the backend which is used. Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid problems during upgrades from older versions. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 47614		2015-11-24 18:28:35 +00:00
config	kernel: add support for KERNEL_CGROUP_PIDS	2015-10-26 11:54:56 +00:00
docs
include	build: add support for choosing a different url filename part than the output file	2015-11-22 19:06:33 +00:00
package	authsae: Use kbit/s as mcast_rate unit like wpad	2015-11-24 18:28:35 +00:00
scripts	build: add support for choosing a different url filename part than the output file	2015-11-22 19:06:33 +00:00
target	ar71xx: Build initramfs by default for Mikrotik devices	2015-11-24 18:28:05 +00:00
toolchain	gcc: fix internal compiler error on MIPS with MIPS16 enabled (triggered by libpcap)	2015-11-18 00:57:22 +00:00
tools	tools/scons: update to 2.4.1	2015-11-21 21:26:06 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	gcc: remove version 4.6, it is no longer needed	2015-11-10 21:10:53 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org