Openwrt/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt
Pawel Dembicki a254279a6c layerscape: Change to combined rootfs on sd images
At this moment layerscape images are ext4 only. It causes problem with
save changes durring sysupgrade and make "firstboot" and failsafe mode
useless.

This patch changes sd-card images to squashfs + f2fs combined images.
To make place, for saving config, kernel space ar now ext4 partition
with fit kernel.

This method of image generation is similar to rest of OpenWrt sd-card
targets.

Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-10-26 00:40:12 +01:00

11 lines
532 B
Plaintext

fdtaddr=0x8f000000
loadaddr=0x81000000
fdt_high=0xa0000000
initrd_high=0xffffffffffffffff
hwconfig=fsl_ddr:bank_intlv=auto
mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000
sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr
bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200
bootcmd=echo starting openwrt ...;run mc_init;run sd_boot
bootdelay=3