Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 907c67fa87 ramips: preinit: use iproute2 instead of vconfig Replace use of vconfig with the corresponding iproute2 syntax in /lib/preinit/07_set_preinit_iface_ramips The switch reset work-around needed on some ramips targets used the deprecated vconfig tool to bring up the pre-init/failsafe interface. This doesn't work on recent builds where vconfig is no longer being deployed, resulting in the device being unreachable when triggered into failsafe mode. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47349		2015-11-02 10:18:02 +00:00
config	kernel: add support for KERNEL_CGROUP_PIDS	2015-10-26 11:54:56 +00:00
docs
include	kernel: update kernel 3.18 to version 3.18.23	2015-11-01 13:45:57 +00:00
package	package/devel/perf: fix build for kernel 4.1	2015-11-02 10:16:28 +00:00
scripts	scripts/checkpatch.pl: Fix deprecation warnings	2015-11-02 10:17:03 +00:00
target	ramips: preinit: use iproute2 instead of vconfig	2015-11-02 10:18:02 +00:00
toolchain	musl: add upstream patch for open_[w]memstream	2015-11-02 10:16:40 +00:00
tools	tools/cmake: update to 3.3.2	2015-10-31 09:31:06 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	build: Allow kernel modules to set build ID debug symbol	2015-10-30 15:20:12 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org