029093a302
This target has full device tree support, thus reducing the number of patches needed for bcm63xx, in which there's a patch for every board. The intention is to start with a minimal amount of downstream patches and start upstreaming all of them. Current status: - Enabling EHCI/OHCI on BCM6358 causes a kernel panic. - BCM63268 lacks Timer Clocks/Reset support. - No PCI/PCIe drivers. - No ethernet drivers. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
82 lines
2.5 KiB
Makefile
82 lines
2.5 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
|
|
DEVICE_VARS += CFE_PART_FLAGS CFE_PART_ID
|
|
DEVICE_VARS += CFE_RAM_FILE
|
|
DEVICE_VARS += CFE_RAM_JFFS2_NAME CFE_RAM_JFFS2_PAD
|
|
DEVICE_VARS += CFE_WFI_CHIP_ID CFE_WFI_FLASH_TYPE
|
|
DEVICE_VARS += CFE_WFI_FLAGS CFE_WFI_VERSION
|
|
DEVICE_VARS += SERCOMM_PID SERCOMM_VERSION
|
|
|
|
# CFE expects a single JFFS2 partition with cferam and kernel. However,
|
|
# it's possible to fool CFE into properly loading both cferam and kernel
|
|
# from two different JFFS2 partitions by adding dummy files (see
|
|
# cfe-jffs2-cferam and cfe-jffs2-kernel).
|
|
# Separate JFFS2 partitions allow upgrading openwrt without reflashing cferam
|
|
# JFFS2 partition, which is much safer in case anything goes wrong.
|
|
define Device/bcm63xx-nand
|
|
FILESYSTEMS := squashfs ubifs
|
|
KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | cfe-jffs2-kernel
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | loader-lzma elf
|
|
KERNEL_INITRAMFS_SUFFIX := .elf
|
|
IMAGES := cfe.bin sysupgrade.bin
|
|
IMAGE/cfe.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) |\
|
|
cfe-jffs2-cferam | append-ubi | cfe-wfi-tag
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
KERNEL_SIZE := 5120k
|
|
CFE_PART_FLAGS :=
|
|
CFE_PART_ID :=
|
|
CFE_RAM_FILE :=
|
|
CFE_RAM_JFFS2_NAME :=
|
|
CFE_RAM_JFFS2_PAD :=
|
|
CFE_WFI_VERSION :=
|
|
CFE_WFI_CHIP_ID = 0x$$(CHIP_ID)
|
|
CFE_WFI_FLASH_TYPE :=
|
|
CFE_WFI_FLAGS :=
|
|
UBINIZE_OPTS := -E 5
|
|
DEVICE_PACKAGES += nand-utils
|
|
endef
|
|
|
|
define Device/sercomm-nand
|
|
$(Device/bcm63xx-nand)
|
|
IMAGES := factory.img sysupgrade.bin
|
|
IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi |\
|
|
cfe-sercomm-part | gzip | cfe-sercomm-load | cfe-sercomm-crypto
|
|
SERCOM_PID :=
|
|
SERCOMM_VERSION :=
|
|
endef
|
|
|
|
define Device/comtrend_vr-3032u
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := Comtrend
|
|
DEVICE_MODEL := VR-3032u
|
|
CHIP_ID := 63268
|
|
SOC := bcm63168
|
|
CFE_RAM_FILE := comtrend,vr-3032u/cferam.000
|
|
CFE_RAM_JFFS2_NAME := cferam.000
|
|
BLOCKSIZE := 128k
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
VID_HDR_OFFSET := 2048
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES)
|
|
CFE_WFI_FLASH_TYPE := 3
|
|
CFE_WFI_VERSION := 0x5732
|
|
endef
|
|
TARGET_DEVICES += comtrend_vr-3032u
|
|
|
|
define Device/netgear_dgnd3700-v2
|
|
$(Device/bcm63xx-nand)
|
|
DEVICE_VENDOR := NETGEAR
|
|
DEVICE_MODEL := DGND3700
|
|
DEVICE_VARIANT := v2
|
|
CHIP_ID := 6362
|
|
CFE_RAM_FILE := netgear,dgnd3700-v2/cferam
|
|
CFE_RAM_JFFS2_NAME := cferam
|
|
CFE_RAM_JFFS2_PAD := 496k
|
|
BLOCKSIZE := 16k
|
|
PAGESIZE := 512
|
|
DEVICE_PACKAGES += $(USB2_PACKAGES)
|
|
CFE_WFI_FLASH_TYPE := 2
|
|
CFE_WFI_VERSION := 0x5731
|
|
endef
|
|
TARGET_DEVICES += netgear_dgnd3700-v2
|