Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 8e3b055b2a atheros[ar2315]: don't detect flash size during board initialization We should not detect actual flash size during board initialization to find board config at the end of the flash, just use large enough mapping size (currently 128 mbit). If mapping size is larger than the actual flash size, than flash will simply be mapped multiple times. This change simplifies code by removing duplication and saves about 200 bytes of uncompressed kernel :) Tested with Ubnt LS2 board equipped with STM 25p32v6p NOR flash (32 mbit). Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> SVN-Revision: 41317		2014-06-24 18:13:13 +00:00
config	Disable crashlog for UML	2014-06-12 11:34:44 +00:00
docs
include	image.mk: introduce Image/Build/UbinizeImage make target	2014-06-24 18:12:47 +00:00
package	fstools: fix factory reset on ubifs overlay	2014-06-24 18:13:05 +00:00
scripts	scripts/metadata.pl: avoid adding depends and select for the same symbol	2014-06-12 14:35:09 +00:00
target	atheros[ar2315]: don't detect flash size during board initialization	2014-06-24 18:13:13 +00:00
toolchain	toolchain: make the default eglibc selection work even if TOOLCHAINOPTS is not enabled	2014-06-19 14:13:16 +00:00
tools	firmware-utils/mkdir615h1: fix magic XOR calculation	2014-06-24 18:13:00 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds.conf.default: add management feed	2014-06-12 15:08:08 +00:00
LICENSE
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org