Openwrt

Openwrt build for Asrock G10 Router

Go to file

Petr Štetiar 8be66c2332 ath79: ar9330: fix switch_led_disable_pins reg value In commit `e9652e1696` ("ath79: fix pinmux for ar933x devices") I've wrongly changed desired register value to 0xf8 although it should've been set to 0x0. 0xf8 value sets bits 3-7 (ETH_SWITCH_LEDx_EN) to 1 which actually enables ethernet switch LEDs, so 0x0 is correct value in order to use the pins as GPIO. Fixes: `e9652e1696` ("ath79: fix pinmux for ar933x devices") Reported-by: Chuanhong Guo <gch981213@gmail.com> Signed-off-by: Petr Štetiar <ynezz@true.cz>		2019-05-17 21:41:42 +02:00
.github
config	lantiq/xrx200: enable initramfs images	2019-05-15 13:34:23 +02:00
include	kernel: bump 4.19 to 4.19.43	2019-05-17 11:21:02 +02:00
package	odhcpd: update to latest git HEAD (FS#2242)	2019-05-17 08:54:30 +02:00
scripts	build: add a config option for enabling a testing version of the target kernel	2019-05-11 11:37:10 +02:00
target	ath79: ar9330: fix switch_led_disable_pins reg value	2019-05-17 21:41:42 +02:00
toolchain	glibc: update to latest 2.27 commit	2019-05-16 19:05:57 +02:00
tools	ipq40xx: add factory image for EnGenius ENS620EXT	2019-05-11 16:37:11 +02:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk	librpc: remove package	2019-01-22 13:29:46 +01:00

README

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org