Openwrt

Openwrt build for Asrock G10 Router

Go to file

Florian Fainelli 8ae2b1155d brcm63xx: create initramfs HCS images Cable Modem devices cannot load an ELF file directly so we need to provide them with a HCS image even when targetting initramfs. Signed-off-by: Florian Fainelli <florian@openwrt.org> SVN-Revision: 36954		2013-06-17 22:57:04 +00:00
docs
include	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
package	netifd: IPv6: Fix sorting order in last commit.	2013-06-17 21:29:14 +00:00
scripts	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
target	brcm63xx: create initramfs HCS images	2013-06-17 22:57:04 +00:00
toolchain	gcc: fix arm libgcc issues with 4.8.0 and 4.8-linaro	2013-06-05 23:37:12 +00:00
tools	tools: add Broadcom cable modem firmware image creator	2013-06-06 22:21:52 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	target: split jffs2 NAND out of jffs2	2013-06-05 20:58:03 +00:00
feeds.conf.default	move packages related to telephony into its own feed	2013-04-29 02:17:02 +00:00
LICENSE
Makefile
README
rules.mk	toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues	2013-05-09 20:50:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org