Openwrt/openwrt/package/hostap/Makefile
2006-09-24 20:49:31 +00:00

140 lines
3.9 KiB
Makefile

#
# Copyright (C) 2006 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
# $Id$
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=hostap-driver
PKG_VERSION:=0.4.9
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
PKG_SOURCE_URL:=http://hostap.epitest.fi/releases/
PKG_MD5SUM:=c7534dc040ab90218257a78488ecd378
PKG_CAT:=zcat
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL_DIR:=$(PKG_BUILD_DIR)/ipkg-install
include $(INCLUDE_DIR)/package.mk
define Package/kmod-hostap/Default
SECTION:=kernel
CATEGORY:=Kernel drivers
DESCRIPTION:=\
Host AP is a driver for 802.11b wireless cards based on Intersil \\\
Prism2/2.5/3 chipset. It supports so called Host AP mode that allows the \\\
card to act as an IEEE 802.11 access point.
URL:=http://hostap.epitest.fi/
ifeq ($(KERNEL),2.6)
VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
else
VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
endif
endef
define Package/kmod-hostap
$(call Package/kmod-hostap/Default)
DEPENDS:=@PCI_SUPPORT||PCMCIA_SUPPORT
TITLE:=Host AP support for Prism2/2.5/3
DESCRIPTION+=\\\
\\\
This package contains the base Host AP driver code that is shared by \\\
different hardware models. You will also need to enable support for \\\
PLX/PCI/CS version of the driver to actually use the driver.
endef
define Package/kmod-hostap-pci
$(call Package/kmod-hostap/Default)
DEPENDS:=kmod-hostap
TITLE:=Host AP driver for PCI adaptors
DESCRIPTION+=\\\
\\\
This package contains the Host AP driver for Prism2.5 PCI adaptors.
endef
define Package/kmod-hostap-plx
$(call Package/kmod-hostap/Default)
DEPENDS:=kmod-hostap
TITLE:=Host AP driver for PLX9052 based PCI adaptors
DESCRIPTION+=\\\
\\\
This package contains the Host AP driver for Prism2/2.5/3 in PLX9052 \\\
based PCI adaptors.
endef
ifeq ($(KERNEL),2.4)
define Build/Compile
$(MAKE) -C $(LINUX_DIR)/ \
ARCH="$(LINUX_KARCH)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
SUBDIRS="$(PKG_BUILD_DIR)/driver/modules" \
modules
endef
define Package/kmod-hostap/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(PKG_BUILD_DIR)/driver/modules/hostap.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_ccmp.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_tkip.$(LINUX_KMOD_SUFFIX) \
$(PKG_BUILD_DIR)/driver/modules/hostap_crypt_wep.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
define Package/kmod-hostap-pci/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(PKG_BUILD_DIR)/driver/modules/hostap_pci.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
define Package/kmod-hostap-plx/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(PKG_BUILD_DIR)/driver/modules/hostap_plx.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
endif
ifeq ($(KERNEL),2.6)
define Build/Compile
endef
ifeq ($(CONFIG_HOSTAP),m)
define Package/kmod-hostap/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
endif
ifeq ($(CONFIG_HOSTAP_PCI),m)
define Package/kmod-hostap-pci/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_pci.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
endif
ifeq ($(CONFIG_HOSTAP_PLX),m)
define Package/kmod-hostap-plx/install
install -m0755 -d $(1)/lib/modules/$(LINUX_VERSION)
$(CP) \
$(MODULES_DIR)/kernel/drivers/net/wireless/hostap/hostap_plx.$(LINUX_KMOD_SUFFIX) \
$(1)/lib/modules/$(LINUX_VERSION)/
endef
endif
endif
$(eval $(call BuildPackage,kmod-hostap))
$(eval $(call BuildPackage,kmod-hostap-pci))
$(eval $(call BuildPackage,kmod-hostap-plx))