Openwrt build for Asrock G10 Router
Go to file
Florian Fainelli 8733456b72 fix quilt installation on all platforms
SVN-Revision: 17405
2009-08-26 07:55:31 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include change HOST_STAMP_PREPARED for toolchain builds to make sure that added/removed patches do not trigger partial toolchain rebuilds 2009-08-24 23:22:28 +00:00
package udevtrigger: replace the non-portable tar options used to prevent a namespace conflict with a change to PKG_BUILD_DIR. fixes build on non-gnu systems 2009-08-24 23:22:32 +00:00
scripts fix breakage introduced with [17394] 2009-08-25 11:56:27 +00:00
target remove kernel patch for now since it is incomplete and has some licensing issues 2009-08-26 07:44:21 +00:00
toolchain more cygwin build fixes 2009-08-26 07:25:24 +00:00
tools fix quilt installation on all platforms 2009-08-26 07:55:31 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile
Config.in add menuconfig option for selecting initramfs compression 2009-08-16 05:35:34 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README
rules.mk move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages 2009-08-20 15:31:17 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org