Openwrt/target/linux/mediatek/patches/0043-ARM-dts-mt8127-enable-basic-SMP-bringup-for-mt8127.patch
Hauke Mehrtens f0a5f24217 kernel: update 4.1 to 4.1.13
- two upstreamed patches removed
- compile tested all targets using 4.1
- run tested ar71xx

Signed-off-by: Roman Yeryomin <roman@advem.lv>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47694
2015-12-02 21:52:41 +00:00

49 lines
1.4 KiB
Diff

From e75f8b666c976aff2aa30b967f74df021d800993 Mon Sep 17 00:00:00 2001
From: "Joe.C" <yingjoe.chen@mediatek.com>
Date: Fri, 1 May 2015 15:43:30 +0800
Subject: [PATCH 43/76] ARM: dts: mt8127: enable basic SMP bringup for mt8127
Add arch timer node to enable arch-timer support. MT8127 firmware
doesn't correctly setup arch-timer frequency and CNTVOFF, add
properties to workaround this.
This also set cpu enable-method to enable SMP.
Signed-off-by: Yingjoe Chen <yingjoe.chen@mediatek.com>
---
arch/arm/boot/dts/mt8127.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/arch/arm/boot/dts/mt8127.dtsi
+++ b/arch/arm/boot/dts/mt8127.dtsi
@@ -23,6 +23,7 @@
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "mediatek,mt81xx-tz-smp";
cpu@0 {
device_type = "cpu";
@@ -72,6 +73,21 @@
};
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) |
+ IRQ_TYPE_LEVEL_LOW)>;
+ clock-frequency = <13000000>;
+ arm,cpu-registers-not-fw-configured;
+ };
+
soc {
#address-cells = <2>;
#size-cells = <2>;