c6c731fe31
Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
553 lines
15 KiB
Diff
553 lines
15 KiB
Diff
From 3ce895cbe3469bfcaa84674ec4f1b2d60e8b370b Mon Sep 17 00:00:00 2001
|
|
From: Mingkai Hu <Mingkai.Hu@freescale.com>
|
|
Date: Mon, 21 Jul 2014 14:48:42 +0800
|
|
Subject: [PATCH 01/70] arm64/ls1043a: add DTS for Freescale LS1043A SoC
|
|
|
|
LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
|
|
similar to LS1021a which complies to Chassis 2.1 spec.
|
|
|
|
Following levels of DTSI/DTS files have been created for the
|
|
LS1043A SoC family:
|
|
|
|
- fsl-ls1043a.dtsi:
|
|
DTS-Include file for FSL LS1043A SoC.
|
|
|
|
Signed-off-by: Li Yang <leoli@freescale.com>
|
|
Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
|
|
Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
|
|
Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
|
|
Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
|
|
---
|
|
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 525 ++++++++++++++++++++++++
|
|
1 file changed, 525 insertions(+)
|
|
create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
|
|
@@ -0,0 +1,525 @@
|
|
+/*
|
|
+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
|
|
+ *
|
|
+ * Copyright 2014-2015, Freescale Semiconductor
|
|
+ *
|
|
+ * Mingkai Hu <Mingkai.hu@freescale.com>
|
|
+ *
|
|
+ * This file is dual-licensed: you can use it either under the terms
|
|
+ * of the GPLv2 or the X11 license, at your option. Note that this dual
|
|
+ * licensing only applies to this file, and not this project as a
|
|
+ * whole.
|
|
+ *
|
|
+ * a) This library is free software; you can redistribute it and/or
|
|
+ * modify it under the terms of the GNU General Public License as
|
|
+ * published by the Free Software Foundation; either version 2 of the
|
|
+ * License, or (at your option) any later version.
|
|
+ *
|
|
+ * This library is distributed in the hope that it will be useful,
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
+ * GNU General Public License for more details.
|
|
+ *
|
|
+ * Or, alternatively,
|
|
+ *
|
|
+ * b) Permission is hereby granted, free of charge, to any person
|
|
+ * obtaining a copy of this software and associated documentation
|
|
+ * files (the "Software"), to deal in the Software without
|
|
+ * restriction, including without limitation the rights to use,
|
|
+ * copy, modify, merge, publish, distribute, sublicense, and/or
|
|
+ * sell copies of the Software, and to permit persons to whom the
|
|
+ * Software is furnished to do so, subject to the following
|
|
+ * conditions:
|
|
+ *
|
|
+ * The above copyright notice and this permission notice shall be
|
|
+ * included in all copies or substantial portions of the Software.
|
|
+ *
|
|
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
+ * OTHER DEALINGS IN THE SOFTWARE.
|
|
+ */
|
|
+
|
|
+/ {
|
|
+ compatible = "fsl,ls1043a";
|
|
+ interrupt-parent = <&gic>;
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+
|
|
+ cpus {
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ /*
|
|
+ * We expect the enable-method for cpu's to be "psci", but this
|
|
+ * is dependent on the SoC FW, which will fill this in.
|
|
+ *
|
|
+ * Currently supported enable-method is psci v0.2
|
|
+ */
|
|
+ cpu0: cpu@0 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a53";
|
|
+ reg = <0x0 0x0>;
|
|
+ clocks = <&clockgen 1 0>;
|
|
+ };
|
|
+
|
|
+ cpu1: cpu@1 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a53";
|
|
+ reg = <0x0 0x1>;
|
|
+ clocks = <&clockgen 1 0>;
|
|
+ };
|
|
+
|
|
+ cpu2: cpu@2 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a53";
|
|
+ reg = <0x0 0x2>;
|
|
+ clocks = <&clockgen 1 0>;
|
|
+ };
|
|
+
|
|
+ cpu3: cpu@3 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a53";
|
|
+ reg = <0x0 0x3>;
|
|
+ clocks = <&clockgen 1 0>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ memory@80000000 {
|
|
+ device_type = "memory";
|
|
+ reg = <0x0 0x80000000 0 0x80000000>;
|
|
+ /* DRAM space 1, size: 2GiB DRAM */
|
|
+ };
|
|
+
|
|
+ sysclk: sysclk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <100000000>;
|
|
+ clock-output-names = "sysclk";
|
|
+ };
|
|
+
|
|
+ timer {
|
|
+ compatible = "arm,armv8-timer";
|
|
+ interrupts = <1 13 0x1>, /* Physical Secure PPI */
|
|
+ <1 14 0x1>, /* Physical Non-Secure PPI */
|
|
+ <1 11 0x1>, /* Virtual PPI */
|
|
+ <1 10 0x1>; /* Hypervisor PPI */
|
|
+ };
|
|
+
|
|
+ pmu {
|
|
+ compatible = "arm,armv8-pmuv3";
|
|
+ interrupts = <0 106 0x4>,
|
|
+ <0 107 0x4>,
|
|
+ <0 95 0x4>,
|
|
+ <0 97 0x4>;
|
|
+ interrupt-affinity = <&cpu0>,
|
|
+ <&cpu1>,
|
|
+ <&cpu2>,
|
|
+ <&cpu3>;
|
|
+ };
|
|
+
|
|
+ gic: interrupt-controller@1400000 {
|
|
+ compatible = "arm,gic-400";
|
|
+ #interrupt-cells = <3>;
|
|
+ interrupt-controller;
|
|
+ reg = <0x0 0x1401000 0 0x1000>, /* GICD */
|
|
+ <0x0 0x1402000 0 0x2000>, /* GICC */
|
|
+ <0x0 0x1404000 0 0x2000>, /* GICH */
|
|
+ <0x0 0x1406000 0 0x2000>; /* GICV */
|
|
+ interrupts = <1 9 0xf08>;
|
|
+ };
|
|
+
|
|
+ soc {
|
|
+ compatible = "simple-bus";
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+ ranges;
|
|
+
|
|
+ clockgen: clocking@1ee1000 {
|
|
+ compatible = "fsl,ls1043a-clockgen";
|
|
+ reg = <0x0 0x1ee1000 0x0 0x1000>;
|
|
+ #clock-cells = <2>;
|
|
+ clocks = <&sysclk>;
|
|
+ };
|
|
+
|
|
+ scfg: scfg@1570000 {
|
|
+ compatible = "fsl,ls1043a-scfg", "syscon";
|
|
+ reg = <0x0 0x1570000 0x0 0x10000>;
|
|
+ big-endian;
|
|
+ };
|
|
+
|
|
+ dcfg: dcfg@1ee0000 {
|
|
+ compatible = "fsl,ls1043a-dcfg", "syscon";
|
|
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
|
|
+ };
|
|
+
|
|
+ ifc: ifc@1530000 {
|
|
+ compatible = "fsl,ifc", "simple-bus";
|
|
+ reg = <0x0 0x1530000 0x0 0x10000>;
|
|
+ interrupts = <0 43 0x4>;
|
|
+ };
|
|
+
|
|
+ esdhc: esdhc@1560000 {
|
|
+ compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
|
|
+ reg = <0x0 0x1560000 0x0 0x10000>;
|
|
+ interrupts = <0 62 0x4>;
|
|
+ clock-frequency = <0>;
|
|
+ voltage-ranges = <1800 1800 3300 3300>;
|
|
+ sdhci,auto-cmd12;
|
|
+ big-endian;
|
|
+ bus-width = <4>;
|
|
+ };
|
|
+
|
|
+ dspi0: dspi@2100000 {
|
|
+ compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x2100000 0x0 0x10000>;
|
|
+ interrupts = <0 64 0x4>;
|
|
+ clock-names = "dspi";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ spi-num-chipselects = <5>;
|
|
+ big-endian;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ dspi1: dspi@2110000 {
|
|
+ compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x2110000 0x0 0x10000>;
|
|
+ interrupts = <0 65 0x4>;
|
|
+ clock-names = "dspi";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ spi-num-chipselects = <5>;
|
|
+ big-endian;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ i2c0: i2c@2180000 {
|
|
+ compatible = "fsl,vf610-i2c";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x2180000 0x0 0x10000>;
|
|
+ interrupts = <0 56 0x4>;
|
|
+ clock-names = "i2c";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ dmas = <&edma0 1 39>,
|
|
+ <&edma0 1 38>;
|
|
+ dma-names = "tx", "rx";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ i2c1: i2c@2190000 {
|
|
+ compatible = "fsl,vf610-i2c";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x2190000 0x0 0x10000>;
|
|
+ interrupts = <0 57 0x4>;
|
|
+ clock-names = "i2c";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ i2c2: i2c@21a0000 {
|
|
+ compatible = "fsl,vf610-i2c";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x21a0000 0x0 0x10000>;
|
|
+ interrupts = <0 58 0x4>;
|
|
+ clock-names = "i2c";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ i2c3: i2c@21b0000 {
|
|
+ compatible = "fsl,vf610-i2c";
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ reg = <0x0 0x21b0000 0x0 0x10000>;
|
|
+ interrupts = <0 59 0x4>;
|
|
+ clock-names = "i2c";
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ duart0: serial@21c0500 {
|
|
+ compatible = "fsl,ns16550", "ns16550a";
|
|
+ reg = <0x00 0x21c0500 0x0 0x100>;
|
|
+ interrupts = <0 54 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ duart1: serial@21c0600 {
|
|
+ compatible = "fsl,ns16550", "ns16550a";
|
|
+ reg = <0x00 0x21c0600 0x0 0x100>;
|
|
+ interrupts = <0 54 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ duart2: serial@21d0500 {
|
|
+ compatible = "fsl,ns16550", "ns16550a";
|
|
+ reg = <0x0 0x21d0500 0x0 0x100>;
|
|
+ interrupts = <0 55 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ duart3: serial@21d0600 {
|
|
+ compatible = "fsl,ns16550", "ns16550a";
|
|
+ reg = <0x0 0x21d0600 0x0 0x100>;
|
|
+ interrupts = <0 55 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ gpio1: gpio@2300000 {
|
|
+ compatible = "fsl,ls1043a-gpio";
|
|
+ reg = <0x0 0x2300000 0x0 0x10000>;
|
|
+ interrupts = <0 66 0x4>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
+
|
|
+ gpio2: gpio@2310000 {
|
|
+ compatible = "fsl,ls1043a-gpio";
|
|
+ reg = <0x0 0x2310000 0x0 0x10000>;
|
|
+ interrupts = <0 67 0x4>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
+
|
|
+ gpio3: gpio@2320000 {
|
|
+ compatible = "fsl,ls1043a-gpio";
|
|
+ reg = <0x0 0x2320000 0x0 0x10000>;
|
|
+ interrupts = <0 68 0x4>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
+
|
|
+ gpio4: gpio@2330000 {
|
|
+ compatible = "fsl,ls1043a-gpio";
|
|
+ reg = <0x0 0x2330000 0x0 0x10000>;
|
|
+ interrupts = <0 134 0x4>;
|
|
+ gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ interrupt-controller;
|
|
+ #interrupt-cells = <2>;
|
|
+ };
|
|
+
|
|
+ lpuart0: serial@2950000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x2950000 0x0 0x1000>;
|
|
+ interrupts = <0 48 0x4>;
|
|
+ clocks = <&clockgen 0 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ lpuart1: serial@2960000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x2960000 0x0 0x1000>;
|
|
+ interrupts = <0 49 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ lpuart2: serial@2970000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x2970000 0x0 0x1000>;
|
|
+ interrupts = <0 50 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ lpuart3: serial@2980000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x2980000 0x0 0x1000>;
|
|
+ interrupts = <0 51 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ lpuart4: serial@2990000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x2990000 0x0 0x1000>;
|
|
+ interrupts = <0 52 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ lpuart5: serial@29a0000 {
|
|
+ compatible = "fsl,ls1021a-lpuart";
|
|
+ reg = <0x0 0x29a0000 0x0 0x1000>;
|
|
+ interrupts = <0 53 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "ipg";
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ wdog0: wdog@2ad0000 {
|
|
+ compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
|
|
+ reg = <0x0 0x2ad0000 0x0 0x10000>;
|
|
+ interrupts = <0 83 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ clock-names = "wdog";
|
|
+ big-endian;
|
|
+ };
|
|
+
|
|
+ edma0: edma@2c00000 {
|
|
+ #dma-cells = <2>;
|
|
+ compatible = "fsl,vf610-edma";
|
|
+ reg = <0x0 0x2c00000 0x0 0x10000>,
|
|
+ <0x0 0x2c10000 0x0 0x10000>,
|
|
+ <0x0 0x2c20000 0x0 0x10000>;
|
|
+ interrupts = <0 103 0x4>,
|
|
+ <0 103 0x4>;
|
|
+ interrupt-names = "edma-tx", "edma-err";
|
|
+ dma-channels = <32>;
|
|
+ big-endian;
|
|
+ clock-names = "dmamux0", "dmamux1";
|
|
+ clocks = <&clockgen 4 0>,
|
|
+ <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ usb0: usb3@2f00000 {
|
|
+ compatible = "snps,dwc3";
|
|
+ reg = <0x0 0x2f00000 0x0 0x10000>;
|
|
+ interrupts = <0 60 0x4>;
|
|
+ dr_mode = "host";
|
|
+ };
|
|
+
|
|
+ usb1: usb3@3000000 {
|
|
+ compatible = "snps,dwc3";
|
|
+ reg = <0x0 0x3000000 0x0 0x10000>;
|
|
+ interrupts = <0 61 0x4>;
|
|
+ dr_mode = "host";
|
|
+ };
|
|
+
|
|
+ usb2: usb3@3100000 {
|
|
+ compatible = "snps,dwc3";
|
|
+ reg = <0x0 0x3100000 0x0 0x10000>;
|
|
+ interrupts = <0 63 0x4>;
|
|
+ dr_mode = "host";
|
|
+ };
|
|
+
|
|
+ sata: sata@3200000 {
|
|
+ compatible = "fsl,ls1043a-ahci";
|
|
+ reg = <0x0 0x3200000 0x0 0x10000>;
|
|
+ interrupts = <0 69 0x4>;
|
|
+ clocks = <&clockgen 4 0>;
|
|
+ };
|
|
+
|
|
+ msi1: msi-controller1@1571000 {
|
|
+ compatible = "fsl,1s1043a-msi";
|
|
+ reg = <0x0 0x1571000 0x0 0x4>,
|
|
+ <0x0 0x1571004 0x0 0x4>;
|
|
+ reg-names = "msiir", "msir";
|
|
+ msi-controller;
|
|
+ interrupts = <0 116 0x4>;
|
|
+ };
|
|
+
|
|
+ msi2: msi-controller2@1572000 {
|
|
+ compatible = "fsl,1s1043a-msi";
|
|
+ reg = <0x0 0x1572000 0x0 0x4>,
|
|
+ <0x0 0x1572004 0x0 0x4>;
|
|
+ reg-names = "msiir", "msir";
|
|
+ msi-controller;
|
|
+ interrupts = <0 126 0x4>;
|
|
+ };
|
|
+
|
|
+ msi3: msi-controller3@1573000 {
|
|
+ compatible = "fsl,1s1043a-msi";
|
|
+ reg = <0x0 0x1573000 0x0 0x4>,
|
|
+ <0x0 0x1573004 0x0 0x4>;
|
|
+ reg-names = "msiir", "msir";
|
|
+ msi-controller;
|
|
+ interrupts = <0 160 0x4>;
|
|
+ };
|
|
+
|
|
+ pcie@3400000 {
|
|
+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
|
|
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
|
|
+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
+ reg-names = "regs", "config";
|
|
+ interrupts = <0 118 0x4>, /* controller interrupt */
|
|
+ <0 117 0x4>; /* PME interrupt */
|
|
+ interrupt-names = "intr", "pme";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+ device_type = "pci";
|
|
+ num-lanes = <4>;
|
|
+ bus-range = <0x0 0xff>;
|
|
+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
|
|
+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
+ msi-parent = <&msi1>;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 7>;
|
|
+ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
|
|
+ <0000 0 0 2 &gic 0 111 0x4>,
|
|
+ <0000 0 0 3 &gic 0 112 0x4>,
|
|
+ <0000 0 0 4 &gic 0 113 0x4>;
|
|
+ };
|
|
+
|
|
+ pcie@3500000 {
|
|
+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
|
|
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
|
|
+ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
+ reg-names = "regs", "config";
|
|
+ interrupts = <0 128 0x4>,
|
|
+ <0 127 0x4>;
|
|
+ interrupt-names = "intr", "pme";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+ device_type = "pci";
|
|
+ num-lanes = <2>;
|
|
+ bus-range = <0x0 0xff>;
|
|
+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
|
|
+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
+ msi-parent = <&msi2>;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 7>;
|
|
+ interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
|
|
+ <0000 0 0 2 &gic 0 121 0x4>,
|
|
+ <0000 0 0 3 &gic 0 122 0x4>,
|
|
+ <0000 0 0 4 &gic 0 123 0x4>;
|
|
+ };
|
|
+
|
|
+ pcie@3600000 {
|
|
+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
|
|
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
|
|
+ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
|
|
+ reg-names = "regs", "config";
|
|
+ interrupts = <0 162 0x4>,
|
|
+ <0 161 0x4>;
|
|
+ interrupt-names = "intr", "pme";
|
|
+ #address-cells = <3>;
|
|
+ #size-cells = <2>;
|
|
+ device_type = "pci";
|
|
+ num-lanes = <2>;
|
|
+ bus-range = <0x0 0xff>;
|
|
+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
|
|
+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
|
|
+ msi-parent = <&msi3>;
|
|
+ #interrupt-cells = <1>;
|
|
+ interrupt-map-mask = <0 0 0 7>;
|
|
+ interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
|
|
+ <0000 0 0 2 &gic 0 155 0x4>,
|
|
+ <0000 0 0 3 &gic 0 156 0x4>,
|
|
+ <0000 0 0 4 &gic 0 157 0x4>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+};
|