cddd459140
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release which was tagged LSDK-20.04-V5.4. https://source.codeaurora.org/external/qoriq/qoriq-components/linux/ For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in LSDK, port the dts patches from 4.14. The patches are sorted into the following categories: 301-arch-xxxx 302-dts-xxxx 303-core-xxxx 701-net-xxxx 801-audio-xxxx 802-can-xxxx 803-clock-xxxx 804-crypto-xxxx 805-display-xxxx 806-dma-xxxx 807-gpio-xxxx 808-i2c-xxxx 809-jailhouse-xxxx 810-keys-xxxx 811-kvm-xxxx 812-pcie-xxxx 813-pm-xxxx 814-qe-xxxx 815-sata-xxxx 816-sdhc-xxxx 817-spi-xxxx 818-thermal-xxxx 819-uart-xxxx 820-usb-xxxx 821-vfio-xxxx Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
27 lines
1.0 KiB
Diff
27 lines
1.0 KiB
Diff
From 4446e9789e662fe53dfcfe34551b5b74a013086c Mon Sep 17 00:00:00 2001
|
|
From: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
Date: Fri, 22 Nov 2019 13:46:46 +0200
|
|
Subject: [PATCH] net: phylink: make QSGMII a valid PHY mode for in-band AN
|
|
|
|
QSGMII is just SGMII clocked at a higher frequency (5 Gbaud vs 1.25
|
|
Gbaud). Logically it is just 4 SGMII interfaces multiplexed onto the
|
|
same physical lanes. Each MAC PCS has its own in-band AN process with
|
|
the system side of the QSGMII PHY, which is identical to the regular
|
|
SGMII AN process. So allow QSGMII as a valid in-band AN mode.
|
|
|
|
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
|
|
---
|
|
drivers/net/phy/phylink.c | 1 +
|
|
1 file changed, 1 insertion(+)
|
|
|
|
--- a/drivers/net/phy/phylink.c
|
|
+++ b/drivers/net/phy/phylink.c
|
|
@@ -283,6 +283,7 @@ static int phylink_parse_mode(struct phy
|
|
|
|
switch (pl->link_config.interface) {
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
+ case PHY_INTERFACE_MODE_QSGMII:
|
|
phylink_set(pl->supported, 10baseT_Half);
|
|
phylink_set(pl->supported, 10baseT_Full);
|
|
phylink_set(pl->supported, 100baseT_Half);
|