Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 84c01891da madwifi: remove an unimportant part of the ibss node handling fix, which led to a regression in ap-to-ap wds operation SVN-Revision: 17576		2009-09-14 10:40:23 +00:00
docs	configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450 )	2009-07-05 11:17:49 +00:00
include	build prereq: look for tar under the name "gnutar" as well	2009-09-14 10:40:04 +00:00
package	madwifi: remove an unimportant part of the ibss node handling fix, which led to a regression in ap-to-ap wds operation	2009-09-14 10:40:23 +00:00
scripts	scripts/feeds: fix an error message	2009-08-31 14:28:24 +00:00
target	Backport arm ppoll()/pselect6() etc. implementation from linux-next@36984265a3	2009-09-12 20:37:26 +00:00
toolchain	add comments & fix descriptions in toolchain config items	2009-09-10 14:32:36 +00:00
tools	firmware-utils: raise the default trx image size limit for something more appropriate for devices with 8M flash	2009-09-07 13:55:02 +00:00
.gitignore
BSDmakefile
Config.in	prepare for upcoming external toolchain support: move config items not strictly toolchain related out of the toolchain submenu	2009-09-10 14:04:41 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	move the package dir to bin/packages/$(BOARD)_$(LIBC)-$(LIBCV) to prevent multiple configs with the same arch from deleting each others' packages	2009-08-20 15:31:17 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org