Openwrt

Openwrt build for Asrock G10 Router

Go to file

Nicolas Thill 8419537475 madwifi: add HAL_TARGET mapping for kirkwood board SVN-Revision: 17960		2009-10-06 20:55:24 +00:00
docs
include	adjust pointer size from 4 to 8 bytes in x86_64 site config	2009-10-04 00:44:32 +00:00
package	madwifi: add HAL_TARGET mapping for kirkwood board	2009-10-06 20:55:24 +00:00
scripts	getver: don't use "-r COMMITTED" arg which needs network access to the repository, use the "Last Changed Rev:" line instead	2009-10-05 09:30:53 +00:00
target	Improve i2c driver slave delay, thanks to Fabrizio Sciarra that provide it * support for master/slave delay (provided patch) * remove some printk that spam logs * introduce new symbols ETRAX_I2C_DYN_ALLOC and ETRAX_I2C_SLAVE_DELAY * cleanup a bit the driver * dump release number	2009-10-06 09:20:30 +00:00
toolchain
tools
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org