Openwrt/target/linux/layerscape/patches-5.4/701-net-0404-LF-457-ocelot-tsn-clean-preempt-interrupt-status.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

62 lines
2.1 KiB
Diff

From 5d246e343440ee4915109dac66543d02d71ca900 Mon Sep 17 00:00:00 2001
From: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Date: Tue, 11 Feb 2020 15:33:46 +0800
Subject: [PATCH] LF-457: ocelot: tsn: clean preempt interrupt status
The INTB interrupt is used both for 1588 interrupt and preemption status
change interrupt on each port. So clean preempt status interrupt in IRQ
handle function. Without handling it, driver may get interrupt storm.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Reviewed-by: Po Liu <Po.Liu@nxp.com>
---
drivers/net/dsa/ocelot/felix.c | 5 +----
drivers/net/ethernet/mscc/ocelot_tsn.c | 14 ++++++++++++++
include/soc/mscc/ocelot.h | 1 +
3 files changed, 16 insertions(+), 4 deletions(-)
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -688,12 +688,9 @@ static irqreturn_t felix_irq_handler(int
/* The INTB interrupt is used for both PTP TX timestamp interrupt
* and preemption status change interrupt on each port.
- *
- * - Get txtstamp if have
- * - TODO: handle preemption. Without handling it, driver may get
- * interrupt storm.
*/
+ ocelot_preempt_irq_clean(ocelot);
ocelot_get_txtstamp(ocelot);
return IRQ_HANDLED;
--- a/drivers/net/ethernet/mscc/ocelot_tsn.c
+++ b/drivers/net/ethernet/mscc/ocelot_tsn.c
@@ -1570,3 +1570,17 @@ int ocelot_dscp_set(struct ocelot *ocelo
return 0;
}
+
+void ocelot_preempt_irq_clean(struct ocelot *ocelot)
+{
+ struct ocelot_port *ocelot_port;
+ int port;
+ u32 val;
+
+ val = DEV_GMII_MM_STATISTICS_MM_STATUS_PRMPT_ACTIVE_STICKY;
+ for (port = 0; port < ocelot->num_phys_ports; port++) {
+ ocelot_port = ocelot->ports[port];
+ ocelot_port_rmwl(ocelot_port, val, val,
+ DEV_GMII_MM_STATISTICS_MM_STATUS);
+ }
+}
--- a/include/soc/mscc/ocelot.h
+++ b/include/soc/mscc/ocelot.h
@@ -592,4 +592,5 @@ int ocelot_rtag_parse_enable(struct ocel
int ocelot_dscp_set(struct ocelot *ocelot, int port,
bool enable, const u8 dscp_ix,
struct tsn_qos_switch_dscp_conf *c);
+void ocelot_preempt_irq_clean(struct ocelot *ocelot);
#endif