EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
8242c6de29
Openwrt/target/linux/ipq806x/patches-4.19/0038-qcom-cpufreq-nvmem-Add-support-for-krait-based-socs.patch
Ansuel Smith c8086c7d2d ipq806x: refresh new and changed patches 
Refresh patches to remove fuzz

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [nbg6817/ipq8065]
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2019-12-26 08:31:42 +01:00

346 lines
10 KiB
Diff
Raw Blame History

Subject: [PATCH v12 14/14] cpufreq: qcom: Add support for krait based socs
Date: Tue, 14 Aug 2018 17:42:33 +0530
Message-Id: <1534248753-2440-15-git-send-email-sricharan@codeaurora.org>
X-Mailer: git-send-email 1.9.1
In-Reply-To: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>
References: <1534248753-2440-1-git-send-email-sricharan@codeaurora.org>
Sender: linux-kernel-owner@vger.kernel.org
Precedence: bulk
List-ID: <linux-kernel.vger.kernel.org>
X-Mailing-List: linux-kernel@vger.kernel.org
In Certain QCOM SoCs like ipq8064, apq8064, msm8960, msm8974
that has KRAIT processors the voltage/current value of each OPP
varies based on the silicon variant in use.
The required OPP related data is determined based on
the efuse value. This is similar to the existing code for
kryo cores. So adding support for krait cores here.
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
---
.../devicetree/bindings/opp/qcom-nvmem-cpufreq.txt | 3 +-
drivers/cpufreq/Kconfig.arm | 2 +-
drivers/cpufreq/cpufreq-dt-platdev.c | 5 +
drivers/cpufreq/qcom-cpufreq-nvmem.c | 151 +++++++++++++++++++--
4 files changed, 149 insertions(+), 12 deletions(-)
# diff --git a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
# index 6dcdfcd..7bc0f1a 100644
# --- a/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
# +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt
# @@ -19,7 +19,8 @@ In 'cpus' nodes:
# In 'operating-points-v2' table:
# - compatible: Should be
# - - 'operating-points-v2-qcom-cpu' for apq8096 and msm8996.
# + - 'operating-points-v2-qcom-cpu' for apq8096, msm8996, msm8974,
# + apq8064, msm8960 and ipq8074.
# - nvmem-cells: A phandle pointing to a nvmem-cells node representing the
# efuse registers that has information about the
# speedbin that is used to select the right frequency/voltage
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -112,7 +112,7 @@ config ARM_OMAP2PLUS_CPUFREQ
config ARM_QCOM_CPUFREQ_NVMEM
tristate "Qualcomm nvmem based CPUFreq"
- depends on ARM64
+ depends on ARCH_QCOM
depends on QCOM_QFPROM
depends on QCOM_SMEM
select PM_OPP
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -128,6 +128,11 @@ static const struct of_device_id blackli
{ .compatible = "ti,am43", },
{ .compatible = "ti,dra7", },
+ { .compatible = "qcom,ipq8064", },
+ { .compatible = "qcom,apq8064", },
+ { .compatible = "qcom,msm8974", },
+ { .compatible = "qcom,msm8960", },
+
{ }
};
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -48,17 +48,92 @@ struct qcom_cpufreq_drv;
struct qcom_cpufreq_match_data {
int (*get_version)(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv);
};
struct qcom_cpufreq_drv {
- struct opp_table **opp_tables;
+ struct opp_table **opp_tables1;
+ struct opp_table **opp_tables2;
u32 versions;
const struct qcom_cpufreq_match_data *data;
};
static struct platform_device *cpufreq_dt_pdev, *cpufreq_pdev;
+static void get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse;
+
+ pte_efuse = *((u32 *)buf);
+
+ *speed = pte_efuse & 0xf;
+ if (*speed == 0xf)
+ *speed = (pte_efuse >> 4) & 0xf;
+
+ if (*speed == 0xf) {
+ *speed = 0;
+ pr_warn("Speed bin: Defaulting to %d\n", *speed);
+ } else {
+ pr_info("Speed bin: %d\n", *speed);
+ }
+
+ *pvs = (pte_efuse >> 10) & 0x7;
+ if (*pvs == 0x7)
+ *pvs = (pte_efuse >> 13) & 0x7;
+
+ if (*pvs == 0x7) {
+ *pvs = 0;
+ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
+ } else {
+ pr_info("PVS bin: %d\n", *pvs);
+ }
+}
+
+static void get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver,
+ struct nvmem_cell *pvs_nvmem, u8 *buf)
+{
+ u32 pte_efuse, redundant_sel;
+
+ pte_efuse = *((u32 *)buf);
+ redundant_sel = (pte_efuse >> 24) & 0x7;
+ *speed = pte_efuse & 0x7;
+
+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
+ *pvs_ver = (pte_efuse >> 4) & 0x3;
+
+ switch (redundant_sel) {
+ case 1:
+ *speed = (pte_efuse >> 27) & 0xf;
+ break;
+ case 2:
+ *pvs = (pte_efuse >> 27) & 0xf;
+ break;
+ }
+
+ /* Check SPEED_BIN_BLOW_STATUS */
+ if (pte_efuse & BIT(3)) {
+ pr_info("Speed bin: %d\n", *speed);
+ } else {
+ pr_warn("Speed bin not set. Defaulting to 0!\n");
+ *speed = 0;
+ }
+
+ /* Check PVS_BLOW_STATUS */
+ pte_efuse = *(((u32 *)buf) + 4);
+ pte_efuse &= BIT(21);
+ if (pte_efuse) {
+ pr_info("PVS bin: %d\n", *pvs);
+ } else {
+ pr_warn("PVS bin not set. Defaulting to 0!\n");
+ *pvs = 0;
+ }
+
+ pr_info("PVS version: %d\n", *pvs_ver);
+}
+
static enum _msm8996_version qcom_cpufreq_get_msm_id(void)
{
size_t len;
@@ -90,11 +165,13 @@ static enum _msm8996_version qcom_cpufre
static int qcom_cpufreq_kryo_name_version(struct device *cpu_dev,
struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
struct qcom_cpufreq_drv *drv)
{
size_t len;
u8 *speedbin;
enum _msm8996_version msm8996_version;
+ *pvs_name = NULL;
msm8996_version = qcom_cpufreq_get_msm_id();
if (NUM_OF_MSM8996_VERSIONS == msm8996_version) {
@@ -122,16 +199,51 @@ static int qcom_cpufreq_kryo_name_versio
return 0;
}
+static int qcom_cpufreq_krait_name_version(struct device *cpu_dev,
+ struct nvmem_cell *speedbin_nvmem,
+ char **pvs_name,
+ struct qcom_cpufreq_drv *drv)
+{
+ int speed = 0, pvs = 0, pvs_ver = 0;
+ u8 *speedbin;
+ size_t len;
+
+ speedbin = nvmem_cell_read(speedbin_nvmem, &len);
+ if (len == 4) {
+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ } else if (len == 8) {
+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver,
+ speedbin_nvmem, speedbin);
+ } else {
+ dev_err(cpu_dev, "Unable to read nvmem data. Defaulting to 0!\n");
+ return -ENODEV;
+ }
+
+ snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
+ speed, pvs, pvs_ver);
+
+ drv->versions = (1 << speed);
+
+ kfree(speedbin);
+ return 0;
+}
+
static const struct qcom_cpufreq_match_data match_data_kryo = {
.get_version = qcom_cpufreq_kryo_name_version,
};
+static const struct qcom_cpufreq_match_data match_data_krait = {
+ .get_version = qcom_cpufreq_krait_name_version,
+};
+
static int qcom_cpufreq_probe(struct platform_device *pdev)
{
struct qcom_cpufreq_drv *drv;
struct nvmem_cell *speedbin_nvmem;
struct device_node *np;
struct device *cpu_dev;
+ char *pvs_name = "speedXX-pvsXX-vXX";
unsigned cpu;
const struct of_device_id *match;
int ret;
@@ -144,7 +256,7 @@ static int qcom_cpufreq_probe(struct pla
if (!np)
return -ENOENT;
- ret = of_device_is_compatible(np, "operating-points-v2-kryo-cpu");
+ ret = of_device_is_compatible(np, "operating-points-v2-qcom-cpu");
if (!ret) {
of_node_put(np);
return -ENOENT;
@@ -172,7 +284,7 @@ static int qcom_cpufreq_probe(struct pla
goto free_drv;
}
- ret = drv->data->get_version(cpu_dev, speedbin_nvmem, drv);
+ ret = drv->data->get_version(cpu_dev, speedbin_nvmem, &pvs_name, drv);
if (ret) {
nvmem_cell_put(speedbin_nvmem);
goto free_drv;
@@ -181,12 +293,18 @@ static int qcom_cpufreq_probe(struct pla
}
of_node_put(np);
- drv->opp_tables = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables),
+ drv->opp_tables1 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables1),
GFP_KERNEL);
- if (!drv->opp_tables) {
+ if (!drv->opp_tables1) {
ret = -ENOMEM;
goto free_drv;
}
+ drv->opp_tables2 = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tables2),
+ GFP_KERNEL);
+ if (!drv->opp_tables2) {
+ ret = -ENOMEM;
+ goto free_opp1;
+ }
for_each_possible_cpu(cpu) {
cpu_dev = get_cpu_device(cpu);
@@ -196,11 +314,22 @@ static int qcom_cpufreq_probe(struct pla
}
if (drv->data->get_version) {
- drv->opp_tables[cpu] =
- dev_pm_opp_set_supported_hw(cpu_dev,
+
+ if (pvs_name) {
+ drv->opp_tables1[cpu] = dev_pm_opp_set_prop_name(cpu_dev,
+ pvs_name);
+ if (IS_ERR(drv->opp_tables1[cpu])) {
+ ret = PTR_ERR(drv->opp_tables1[cpu]);
+ dev_err(cpu_dev, "Failed to add OPP name %s\n",
+ pvs_name);
+ goto free_opp;
+ }
+ }
+
+ drv->opp_tables2[cpu] = dev_pm_opp_set_supported_hw(cpu_dev,
&drv->versions, 1);
- if (IS_ERR(drv->opp_tables[cpu])) {
- ret = PTR_ERR(drv->opp_tables[cpu]);
+ if (IS_ERR(drv->opp_tables2[cpu])) {
+ ret = PTR_ERR(drv->opp_tables2[cpu]);
dev_err(cpu_dev,
"Failed to set supported hardware\n");
goto free_opp;
@@ -220,11 +349,18 @@ static int qcom_cpufreq_probe(struct pla
free_opp:
for_each_possible_cpu(cpu) {
- if (IS_ERR_OR_NULL(drv->opp_tables[cpu]))
+ if (IS_ERR_OR_NULL(drv->opp_tables1[cpu]))
break;
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]);
}
- kfree(drv->opp_tables);
+ for_each_possible_cpu(cpu) {
+ if (IS_ERR_OR_NULL(drv->opp_tables2[cpu]))
+ break;
+ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]);
+ }
+ kfree(drv->opp_tables2);
+free_opp1:
+ kfree(drv->opp_tables1);
free_drv:
kfree(drv);
@@ -239,10 +375,14 @@ static int qcom_cpufreq_remove(struct pl
platform_device_unregister(cpufreq_dt_pdev);
for_each_possible_cpu(cpu)
- if (drv->opp_tables[cpu])
- dev_pm_opp_put_supported_hw(drv->opp_tables[cpu]);
+ if (drv->opp_tables1[cpu])
+ dev_pm_opp_put_prop_name(drv->opp_tables1[cpu]);
+ for_each_possible_cpu(cpu)
+ if (drv->opp_tables2[cpu])
+ dev_pm_opp_put_supported_hw(drv->opp_tables2[cpu]);
- kfree(drv->opp_tables);
+ kfree(drv->opp_tables1);
+ kfree(drv->opp_tables2);
kfree(drv);
return 0;
@@ -259,6 +399,10 @@ static struct platform_driver qcom_cpufr
static const struct of_device_id qcom_cpufreq_match_list[] __initconst = {
{ .compatible = "qcom,apq8096", .data = &match_data_kryo },
{ .compatible = "qcom,msm8996", .data = &match_data_kryo },
+ { .compatible = "qcom,ipq8064", .data = &match_data_krait },
+ { .compatible = "qcom,apq8064", .data = &match_data_krait },
+ { .compatible = "qcom,msm8974", .data = &match_data_krait },
+ { .compatible = "qcom,msm8960", .data = &match_data_krait },
{},
};
Reference in New Issue View Git Blame Copy Permalink