Openwrt/target/linux
Kristian Evensen 80829022b0 ramips: add support for the HNET C108
The HNET C108
(http://www.szhwtech88.com/Product-product-cid-100-id-4374.html) is a
mifi based on MT7602A, which has the following specifications:

* CPU: MT7620A
* 1x 10/100Mbps Ethernet.
* 16 MB Flash.
* 64 MB RAM.
* 1x USB 2.0 port. Only power is connected, this port is meant for
charging other devices.
* 1x mini-PCIe slots.
* 1x SIM slots.
* 1x 2.4Ghz WIFI.
* 1x button.
* 6000 mAh battery.
* 5x controllable LEDs.

Works:
* Wifi.
* Switch.
* mini-PCIe slot. Only tested with a USB device (a modem).
* SIM slot.
* Sysupgrade.
* Button (reset).

Not working (also applies to the factory firmware):
* Wifi LED. It is always switched on, there is no relation to the
up/down state or activity of the wireless interface.

Not tested:
* SD card reader.

Notes:
* The C108 has no dedicated status LED. I therefore set the LAN LED as
status LED.

Installation:
The router comes pre-installed with OpenWRT, including a variant of
Luci. The initial firmware install can be done through this UI,
following normal procedure. I.e., access the UI and update the firmware
using the sysupgrade-image. Remember to select that you do not want to
keep existing settings.

Recovery:
If you brick the device, the C108 supports recovery using TFTP. Keep the
reset button pressed for ~5sec when booting to trigger TFTP. Set the
address of the network interface on your machine to 10.10.10.3/24, and
rename your image file to Kernal.bin.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
2017-09-09 09:55:13 +02:00
..
adm5120
adm8668
apm821xx
ar7
ar71xx ar71xx: WNDR4300: use the switch LED trigger on the WAN port 2017-09-05 08:43:39 +02:00
arc770
archs38
armvirt
at91
ath25
au1000
bcm53xx kernel: update 4.4 to 4.4.86 2017-09-05 08:43:39 +02:00
brcm47xx
brcm63xx kernel: update 4.4 to 4.4.86 2017-09-05 08:43:39 +02:00
brcm2708 brcm2708: bcm2710: do not activate neon-vfpv4 manually 2017-08-26 12:35:44 +02:00
cns3xxx
gemini
generic kernel: rtl8306: fix port link status 2017-09-08 21:52:38 +02:00
imx6
ipq806x ipq806x: Archer C2600: fix switch ports numbering 2017-08-24 08:39:12 +02:00
ixp4xx
kirkwood
lantiq lantiq: fix xrx200 switch carrier state 2017-09-08 21:48:48 +02:00
layerscape layerscape: do not add custom CFLAGS. 2017-08-26 12:36:02 +02:00
malta
mcs814x
mediatek mediatek: fix mdio schedule while atomic error 2017-09-07 10:11:45 +02:00
mpc85xx
mvebu
mxs
octeon
omap
omap24xx
orion
oxnas
pistachio
ppc40x
ppc44x
ramips ramips: add support for the HNET C108 2017-09-09 09:55:13 +02:00
rb532
sunxi
uml
x86
xburst
zynq
Makefile