Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jonas Gorski 80650c9475 base-files: wait for wifi modules to settle On slower devices wifi drivers might take too long for detecting devices, resulting in the wifi detect call not seeing them. This was observed on a bcm6348 with bcm4318 wifi. Adding a one second pause was enough for b43 to expose the device. SVN-Revision: 31639		2012-05-06 21:25:42 +00:00
docs
include	scons: override the platform instead of using the host one - fixes build issues on non-linux systems	2012-05-05 21:02:35 +00:00
package	base-files: wait for wifi modules to settle	2012-05-06 21:25:42 +00:00
scripts	ext-toolchain.sh: don't pass CFLAGS when wrapping ld	2012-05-01 22:45:55 +00:00
target	bcm63xx: fix a race between PCI bus scan and fallback sprom registration	2012-05-06 21:25:34 +00:00
toolchain	switch to 2.6.38	2012-05-01 07:00:17 +00:00
tools	scons: fix compatibility with python 3, upstream still does not support it...	2012-05-06 17:04:37 +00:00
.gitignore
BSDmakefile
Config.in	make xz ramdisk images also available for 2.6.39+	2012-04-18 15:14:05 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org