Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 7f895c6776 mac80211: rt2x00: enable setting wifi led polarity from OF This patch enables setting the wifi led polarity from OF. It can be used in a DTS' wmac section like this: ralink,led-polarity = <1>; Valid values are 0 or 1. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> SVN-Revision: 37607		2013-07-29 13:09:16 +00:00
docs
include	build: unify target independent optimization options	2013-07-29 09:38:29 +00:00
package	mac80211: rt2x00: enable setting wifi led polarity from OF	2013-07-29 13:09:16 +00:00
scripts	kernel: add a new global config symbol for enabling rfkill support (can be enabled by default via target feature flag)	2013-07-21 11:55:30 +00:00
target	kernel: add missing config symbols for 3.10	2013-07-29 12:48:57 +00:00
toolchain	gcc: add a bugfix for an internal compiler error on mips64	2013-07-29 10:11:07 +00:00
tools	tools: make padjffs2 depend on findutils	2013-07-29 09:38:24 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: unify target independent optimization options	2013-07-29 09:38:29 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE
Makefile
README
rules.mk	build: unify target independent optimization options	2013-07-29 09:38:29 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org