7c1c0a00fc
This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches instead of keeping a local version. As a consequence: - we use a part of the shared definitions there and update device DTS files accordingly - we move additional stuff from our local v1.0.dtsi to the patch - we drop partitions, LEDs and keys from the file as we will implement them differently anyway Like with the previous patch, this follows the idea that a diff from upstream might be easier to handle than a big file of our own with different distribution pattern of properties. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
90 lines
1.9 KiB
Diff
90 lines
1.9 KiB
Diff
This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
|
|
instead of keeping a local version.
|
|
We drop partitions, LEDs and keys from the file as we will implement
|
|
them differently anyway.
|
|
|
|
--- a/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
|
|
+++ b/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
|
|
@@ -42,16 +42,6 @@
|
|
#size-cells = <1>;
|
|
spi-max-frequency = <50000000>;
|
|
reg = <0>;
|
|
-
|
|
- partition@0 {
|
|
- label = "rootfs";
|
|
- reg = <0x0 0x1000000>;
|
|
- };
|
|
-
|
|
- partition@1 {
|
|
- label = "scratch";
|
|
- reg = <0x1000000 0x1000000>;
|
|
- };
|
|
};
|
|
};
|
|
};
|
|
@@ -64,64 +54,5 @@
|
|
ports-implemented = <0x1>;
|
|
status = "ok";
|
|
};
|
|
-
|
|
- gpio_keys {
|
|
- compatible = "gpio-keys";
|
|
- pinctrl-0 = <&buttons_pins>;
|
|
- pinctrl-names = "default";
|
|
-
|
|
- button@1 {
|
|
- label = "reset";
|
|
- linux,code = <KEY_RESTART>;
|
|
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
|
|
- linux,input-type = <1>;
|
|
- debounce-interval = <60>;
|
|
- };
|
|
- button@2 {
|
|
- label = "wps";
|
|
- linux,code = <KEY_WPS_BUTTON>;
|
|
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
|
|
- linux,input-type = <1>;
|
|
- debounce-interval = <60>;
|
|
- };
|
|
- };
|
|
-
|
|
- leds {
|
|
- compatible = "gpio-leds";
|
|
- pinctrl-0 = <&leds_pins>;
|
|
- pinctrl-names = "default";
|
|
-
|
|
- led@7 {
|
|
- label = "led_usb1";
|
|
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
|
|
- linux,default-trigger = "usbdev";
|
|
- default-state = "off";
|
|
- };
|
|
-
|
|
- led@8 {
|
|
- label = "led_usb3";
|
|
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
|
|
- linux,default-trigger = "usbdev";
|
|
- default-state = "off";
|
|
- };
|
|
-
|
|
- led@9 {
|
|
- label = "status_led_fail";
|
|
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
|
|
- default-state = "off";
|
|
- };
|
|
-
|
|
- led@26 {
|
|
- label = "sata_led";
|
|
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
|
|
- default-state = "off";
|
|
- };
|
|
-
|
|
- led@53 {
|
|
- label = "status_led_pass";
|
|
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
|
|
- default-state = "off";
|
|
- };
|
|
- };
|
|
};
|
|
};
|