EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
7e757a09ec
Openwrt/target/linux/ipq806x/patches-5.4/083-ipq8064-dtsi-additions.patch
Ansuel Smith aeee1bd2da ipq806x: fix missing changes in 5.4 for new cpufreq implementation 
The new cpufreq dedicated driver changed the node structure
on how the cache should be defined in the dts. The 5.4 dtsi addition
patch has not been updated to follow the new implementation.
Fix this to restore correct cache scaling and restore any performance
regression.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
2021-06-30 23:14:43 +02:00

1025 lines
22 KiB
Diff
Raw Blame History

--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -8,6 +8,8 @@
#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/mfd/qcom-rpm.h>
+#include <dt-bindings/clock/qcom,rpmcc.h>
/ {
#address-cells = <1>;
@@ -28,6 +30,16 @@
next-level-cache = <&L2>;
qcom,acc = <&acc0>;
qcom,saw = <&saw0>;
+ clocks = <&kraitcc 0>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2a>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
cpu1: cpu@1 {
@@ -38,11 +50,476 @@
next-level-cache = <&L2>;
qcom,acc = <&acc1>;
qcom,saw = <&saw1>;
+ clocks = <&kraitcc 1>, <&kraitcc 4>;
+ clock-names = "cpu", "l2";
+ clock-latency = <100000>;
+ cpu-supply = <&smb208_s2b>;
+ operating-points-v2 = <&opp_table0>;
+ voltage-tolerance = <5>;
+ cooling-min-state = <0>;
+ cooling-max-state = <10>;
+ #cooling-cells = <2>;
+ cpu-idle-states = <&CPU_SPC>;
};
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
+ idle-states {
+ CPU_SPC: spc {
+ compatible = "qcom,idle-state-spc", "arm,idle-state";
+ status = "disabled";
+ entry-latency-us = <400>;
+ exit-latency-us = <900>;
+ min-residency-us = <3000>;
+ };
+ };
+ };
+
+ opp_table_l2: opp_table_l2 {
+ compatible = "operating-points-v2";
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1100000>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1150000>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+ };
+
+ opp_table0: opp_table0 {
+ compatible = "operating-points-v2-kryo-cpu";
+ nvmem-cells = <&speedbin_efuse>;
+
+ opp-384000000 {
+ opp-hz = /bits/ 64 <384000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1000000>;
+ opp-microvolt-speed0-pvs1-v0 = <925000>;
+ opp-microvolt-speed0-pvs2-v0 = <875000>;
+ opp-microvolt-speed0-pvs3-v0 = <800000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <0>;
+ };
+
+ opp-600000000 {
+ opp-hz = /bits/ 64 <600000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1050000>;
+ opp-microvolt-speed0-pvs1-v0 = <975000>;
+ opp-microvolt-speed0-pvs2-v0 = <925000>;
+ opp-microvolt-speed0-pvs3-v0 = <850000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-800000000 {
+ opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1100000>;
+ opp-microvolt-speed0-pvs1-v0 = <1025000>;
+ opp-microvolt-speed0-pvs2-v0 = <995000>;
+ opp-microvolt-speed0-pvs3-v0 = <900000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1000000000 {
+ opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1150000>;
+ opp-microvolt-speed0-pvs1-v0 = <1075000>;
+ opp-microvolt-speed0-pvs2-v0 = <1025000>;
+ opp-microvolt-speed0-pvs3-v0 = <950000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1200000000 {
+ opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1200000>;
+ opp-microvolt-speed0-pvs1-v0 = <1125000>;
+ opp-microvolt-speed0-pvs2-v0 = <1075000>;
+ opp-microvolt-speed0-pvs3-v0 = <1000000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <1>;
+ };
+
+ opp-1400000000 {
+ opp-hz = /bits/ 64 <1400000000>;
+ opp-microvolt-speed0-pvs0-v0 = <1250000>;
+ opp-microvolt-speed0-pvs1-v0 = <1175000>;
+ opp-microvolt-speed0-pvs2-v0 = <1125000>;
+ opp-microvolt-speed0-pvs3-v0 = <1050000>;
+ opp-supported-hw = <0x1>;
+ clock-latency-ns = <100000>;
+ opp-level = <2>;
+ };
+ };
+
+ thermal-zones {
+ tsens_tz_sensor0 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 0>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor1 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 1>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor2 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 2>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor3 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 3>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor4 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 4>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor5 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 5>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor6 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 6>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor7 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 7>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor8 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 8>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor9 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 9>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
+ };
+
+ tsens_tz_sensor10 {
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
+ thermal-sensors = <&tsens 10>;
+
+ trips {
+ cpu-critical-hi {
+ temperature = <125000>;
+ hysteresis = <2000>;
+ type = "critical_high";
+ };
+
+ cpu-config-hi {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "configurable_hi";
+ };
+
+ cpu-config-lo {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "configurable_lo";
+ };
+
+ cpu-critical-low {
+ temperature = <0>;
+ hysteresis = <2000>;
+ type = "critical_low";
+ };
+ };
};
};
@@ -93,6 +570,15 @@
};
};
+ fab-scaling {
+ compatible = "qcom,fab-scaling";
+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
+ clock-names = "apps-fab-clk", "ddr-fab-clk";
+ fab_freq_high = <533000000>;
+ fab_freq_nominal = <400000000>;
+ cpu_freq_threshold = <1000000000>;
+ };
+
firmware {
scm {
compatible = "qcom,scm-ipq806x", "qcom,scm";
@@ -120,6 +606,95 @@
reg-names = "lpass-lpaif";
};
+ L2: l2-cache {
+ compatible = "qcom,krait-cache", "cache";
+ cache-level = <2>;
+ qcom,saw = <&saw_l2>;
+
+ clocks = <&kraitcc 4>;
+ clock-names = "l2";
+ l2-supply = <&smb208_s1a>;
+ operating-points-v2 = <&opp_table_l2>;
+ };
+
+ qfprom: qfprom@700000 {
+ compatible = "qcom,qfprom", "syscon";
+ reg = <0x700000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ status = "okay";
+ tsens_calib: calib@400 {
+ reg = <0x400 0xb>;
+ };
+ tsens_backup: backup@410 {
+ reg = <0x410 0xb>;
+ };
+ speedbin_efuse: speedbin@0c0 {
+ reg = <0x0c0 0x4>;
+ };
+ };
+
+ rpm: rpm@108000 {
+ compatible = "qcom,rpm-ipq8064";
+ reg = <0x108000 0x1000>;
+ qcom,ipc = <&l2cc 0x8 2>;
+
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ack", "err", "wakeup";
+
+ clocks = <&gcc RPM_MSG_RAM_H_CLK>;
+ clock-names = "ram";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rpmcc: clock-controller {
+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
+ #clock-cells = <1>;
+ };
+
+ regulators {
+ compatible = "qcom,rpm-smb208-regulators";
+
+ smb208_s1a: s1a {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s1b: s1b {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1150000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2a: s2a {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+
+ smb208_s2b: s2b {
+ regulator-min-microvolt = < 800000>;
+ regulator-max-microvolt = <1250000>;
+
+ qcom,switch-mode-frequency = <1200000>;
+ };
+ };
+ };
+
+ rng@1a500000 {
+ compatible = "qcom,prng";
+ reg = <0x1a500000 0x200>;
+ clocks = <&gcc PRNG_CLK>;
+ clock-names = "core";
+ };
+
qcom_pinmux: pinmux@800000 {
compatible = "qcom,ipq8064-pinctrl";
reg = <0x800000 0x4000>;
@@ -159,6 +734,15 @@
};
};
+ i2c4_pins: i2c4_pinmux {
+ mux {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -168,6 +752,53 @@
};
};
+ nand_pins: nand_pins {
+ disable {
+ pins = "gpio34", "gpio35", "gpio36",
+ "gpio37", "gpio38";
+ function = "nand";
+ drive-strength = <10>;
+ bias-disable;
+ };
+
+ pullups {
+ pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
+ bias-pull-up;
+ };
+
+ hold {
+ pins = "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45",
+ "gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
+ bias-bus-hold;
+ };
+ };
+
+ mdio0_pins: mdio0_pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2_pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
leds_pins: leds_pins {
mux {
pins = "gpio7", "gpio8", "gpio9",
@@ -229,6 +860,17 @@
clock-output-names = "acpu1_aux";
};
+ l2cc: clock-controller@2011000 {
+ compatible = "qcom,kpss-gcc", "syscon";
+ reg = <0x2011000 0x1000>;
+ clock-output-names = "acpu_l2_aux";
+ };
+
+ kraitcc: clock-controller {
+ compatible = "qcom,krait-cc-v1";
+ #clock-cells = <1>;
+ };
+
saw0: regulator@2089000 {
compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
@@ -241,6 +883,17 @@
regulator;
};
+ saw_l2: regulator@02012000 {
+ compatible = "qcom,saw2", "syscon";
+ reg = <0x02012000 0x1000>;
+ regulator;
+ };
+
+ sic_non_secure: sic-non-secure@12100000 {
+ compatible = "syscon";
+ reg = <0x12100000 0x10000>;
+ };
+
gsbi2: gsbi@12480000 {
compatible = "qcom,gsbi-v1.0.0";
cell-index = <2>;
@@ -436,6 +1089,15 @@
#power-domain-cells = <1>;
};
+ tsens: thermal-sensor@900000 {
+ compatible = "qcom,ipq8064-tsens";
+ reg = <0x900000 0x3680>;
+ nvmem-cells = <&tsens_calib>, <&tsens_backup>;
+ nvmem-cell-names = "calib", "calib_backup";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+ #thermal-sensor-cells = <1>;
+ };
+
tcsr: syscon@1a400000 {
compatible = "qcom,tcsr-ipq8064", "syscon";
reg = <0x1a400000 0x100>;
@@ -448,6 +1110,95 @@
#reset-cells = <1>;
};
+ sfpb_mutex_block: syscon@1200600 {
+ compatible = "syscon";
+ reg = <0x01200600 0x100>;
+ };
+
+ hs_phy_0: hs_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_0: ss_phy_0 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_0: usb3@110f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x110f8800 0x8000>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_0_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_0: dwc3@11000000 {
+ compatible = "snps,dwc3";
+ reg = <0x11000000 0xcd00>;
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_0>, <&ss_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
+ hs_phy_1: hs_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x100f8800 0x30>;
+ clocks = <&gcc USB30_1_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ ss_phy_1: ss_phy_1 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x100f8830 0x30>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
+
+ usb3_1: usb3@100f8800 {
+ compatible = "qcom,dwc3", "syscon";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x100f8800 0x8000>;
+ clocks = <&gcc USB30_1_MASTER_CLK>;
+ clock-names = "core";
+
+ ranges;
+
+ resets = <&gcc USB30_1_MASTER_RESET>;
+ reset-names = "master";
+
+ status = "disabled";
+
+ dwc3_1: dwc3@10000000 {
+ compatible = "snps,dwc3";
+ reg = <0x10000000 0xcd00>;
+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hs_phy_1>, <&ss_phy_1>;
+ phy-names = "usb2-phy", "usb3-phy";
+ dr_mode = "host";
+ snps,dis_u3_susphy_quirk;
+ };
+ };
+
pcie0: pci@1b500000 {
compatible = "qcom,pcie-ipq8064";
reg = <0x1b500000 0x1000
@@ -601,6 +1352,167 @@
perst-gpio = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
};
+ adm_dma: dma@18300000 {
+ compatible = "qcom,adm";
+ reg = <0x18300000 0x100000>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+
+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
+ clock-names = "core", "iface";
+
+ resets = <&gcc ADM0_RESET>,
+ <&gcc ADM0_PBUS_RESET>,
+ <&gcc ADM0_C0_RESET>,
+ <&gcc ADM0_C1_RESET>,
+ <&gcc ADM0_C2_RESET>;
+ reset-names = "clk", "pbus", "c0", "c1", "c2";
+ qcom,ee = <0>;
+
+ status = "disabled";
+ };
+
+ nand_controller: nand-controller@1ac00000 {
+ compatible = "qcom,ipq806x-nand";
+ reg = <0x1ac00000 0x800>;
+
+ clocks = <&gcc EBI2_CLK>,
+ <&gcc EBI2_AON_CLK>;
+ clock-names = "core", "aon";
+
+ dmas = <&adm_dma 3>;
+ dma-names = "rxtx";
+ qcom,cmd-crci = <15>;
+ qcom,data-crci = <3>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ nss_common: syscon@03000000 {
+ compatible = "syscon";
+ reg = <0x03000000 0x0000FFFF>;
+ };
+
+ qsgmii_csr: syscon@1bb00000 {
+ compatible = "syscon";
+ reg = <0x1bb00000 0x000001FF>;
+ };
+
+ stmmac_axi_setup: stmmac-axi-config {
+ snps,wr_osr_lmt = <7>;
+ snps,rd_osr_lmt = <7>;
+ snps,blen = <16 0 0 0 0 0 0>;
+ };
+
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac0: ethernet@37000000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37000000 0x200000>;
+ interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac1: ethernet@37200000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37200000 0x200000>;
+ interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE2_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE2_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac2: ethernet@37400000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37400000 0x200000>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE3_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE3_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
+ gmac3: ethernet@37600000 {
+ device_type = "network";
+ compatible = "qcom,ipq806x-gmac", "snps,dwmac";
+ reg = <0x37600000 0x200000>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+
+ snps,axi-config = <&stmmac_axi_setup>;
+ snps,pbl = <32>;
+ snps,aal = <1>;
+
+ qcom,nss-common = <&nss_common>;
+ qcom,qsgmii-csr = <&qsgmii_csr>;
+
+ clocks = <&gcc GMAC_CORE4_CLK>;
+ clock-names = "stmmaceth";
+
+ resets = <&gcc GMAC_CORE4_RESET>;
+ reset-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";
@@ -676,4 +1588,17 @@
};
};
};
+
+ sfpb_mutex: sfpb-mutex {
+ compatible = "qcom,sfpb-mutex";
+ syscon = <&sfpb_mutex_block 4 4>;
+
+ #hwlock-cells = <1>;
+ };
+
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem>;
+ hwlocks = <&sfpb_mutex 3>;
+ };
};
Reference in New Issue View Git Blame Copy Permalink