Openwrt/target/linux/layerscape/patches-5.4/302-dts-0069-arm64-dts-ls1028a-Add-ftm_alarm0-DT-node.patch
Yangbo Lu cddd459140 layerscape: add patches-5.4
Add patches for linux-5.4. The patches are from NXP LSDK-20.04 release
which was tagged LSDK-20.04-V5.4.
https://source.codeaurora.org/external/qoriq/qoriq-components/linux/

For boards LS1021A-IOT, and Traverse-LS1043 which are not involved in
LSDK, port the dts patches from 4.14.

The patches are sorted into the following categories:
  301-arch-xxxx
  302-dts-xxxx
  303-core-xxxx
  701-net-xxxx
  801-audio-xxxx
  802-can-xxxx
  803-clock-xxxx
  804-crypto-xxxx
  805-display-xxxx
  806-dma-xxxx
  807-gpio-xxxx
  808-i2c-xxxx
  809-jailhouse-xxxx
  810-keys-xxxx
  811-kvm-xxxx
  812-pcie-xxxx
  813-pm-xxxx
  814-qe-xxxx
  815-sata-xxxx
  816-sdhc-xxxx
  817-spi-xxxx
  818-thermal-xxxx
  819-uart-xxxx
  820-usb-xxxx
  821-vfio-xxxx

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
2020-05-07 12:53:06 +02:00

47 lines
1.2 KiB
Diff

From cc4f01aa78bfbebd7bdb52b4d873b5c9a332319e Mon Sep 17 00:00:00 2001
From: Biwen Li <biwen.li@nxp.com>
Date: Thu, 27 Jun 2019 14:24:29 +0800
Subject: [PATCH] arm64: dts: ls1028a: Add ftm_alarm0 DT node
The patch adds ftm_alarm0 DT node for LS1028ARDB board
FlexTimer1 module is used to wakeup the system
Signed-off-by: Biwen Li <biwen.li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -17,6 +17,10 @@
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ rtc1 = &ftm_alarm0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -769,6 +773,19 @@
little-endian;
};
};
+
+ rcpm: rcpm@1e34040 {
+ compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x1c>;
+ #fsl,rcpm-wakeup-cells = <7>;
+ };
+
+ ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ls1028a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0 0x0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
firmware {