Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich 78f69b66d4 dnsmasq: add option broadcast to host sections There are certain consumer devices which are outliers in protocol conformance. An example is Samsung bluray players, which require broadcast DHCP responses (on Ethernet only, strangely not on Wifi). By specifying: config host ... option broadcast 1 this will enable the response to be sent as an Ethernet broadcast and not as a unicast. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> SVN-Revision: 38365		2013-10-11 18:33:15 +00:00
docs
include	Incorrect checkout of git submodules	2013-10-10 15:01:50 +00:00
package	dnsmasq: add option broadcast to host sections	2013-10-11 18:33:15 +00:00
scripts	opkg: add support for SHA256 verification	2013-10-04 05:56:20 +00:00
target	make the generated images actually flashable on the Unifi devices.	2013-10-11 15:41:42 +00:00
toolchain	uClibc: fix scoped-IPv6-addresses in getnameinfo	2013-09-30 08:41:00 +00:00
tools	tools: add tool to generate dcs93xl images	2013-10-07 15:01:05 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: extend menu with few ubifs options	2013-10-04 10:49:47 +00:00
feeds.conf.default	feeds.conf.default: switch packages feed to git (#13818 )	2013-07-05 02:04:40 +00:00
LICENSE
Makefile
README
rules.mk	build: include the cpu type as part of the toolchain/target directory name	2013-09-26 17:53:32 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org