866e229299
SVN-Revision: 37340
331 lines
8.8 KiB
Diff
331 lines
8.8 KiB
Diff
--- a/drivers/net/ethernet/broadcom/Kconfig
|
|
+++ b/drivers/net/ethernet/broadcom/Kconfig
|
|
@@ -24,6 +24,7 @@ config B44
|
|
select SSB
|
|
select NET_CORE
|
|
select MII
|
|
+ select PHYLIB
|
|
---help---
|
|
If you have a network (Ethernet) controller of this type, say Y
|
|
or M and read the Ethernet-HOWTO, available from
|
|
--- a/drivers/net/ethernet/broadcom/b44.c
|
|
+++ b/drivers/net/ethernet/broadcom/b44.c
|
|
@@ -29,6 +29,7 @@
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/ssb/ssb.h>
|
|
#include <linux/slab.h>
|
|
+#include <linux/phy.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
@@ -300,21 +301,23 @@ static inline int b44_writephy(struct b4
|
|
}
|
|
|
|
/* miilib interface */
|
|
-static int b44_mii_read(struct net_device *dev, int phy_id, int location)
|
|
+static int b44_mii_read(struct mii_bus *bus, int phy_id, int location)
|
|
{
|
|
u32 val;
|
|
- struct b44 *bp = netdev_priv(dev);
|
|
+ struct b44 *bp = bus->priv;
|
|
int rc = __b44_readphy(bp, phy_id, location, &val);
|
|
if (rc)
|
|
return 0xffffffff;
|
|
return val;
|
|
}
|
|
|
|
-static void b44_mii_write(struct net_device *dev, int phy_id, int location,
|
|
- int val)
|
|
+static int b44_mii_write(struct mii_bus *bus, int phy_id, int location,
|
|
+ u16 val)
|
|
{
|
|
- struct b44 *bp = netdev_priv(dev);
|
|
+ struct b44 *bp = bus->priv;
|
|
__b44_writephy(bp, phy_id, location, val);
|
|
+
|
|
+ return 0;
|
|
}
|
|
|
|
static int b44_phy_reset(struct b44 *bp)
|
|
@@ -1821,102 +1824,24 @@ static int b44_get_settings(struct net_d
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
|
|
- cmd->supported = (SUPPORTED_Autoneg);
|
|
- cmd->supported |= (SUPPORTED_100baseT_Half |
|
|
- SUPPORTED_100baseT_Full |
|
|
- SUPPORTED_10baseT_Half |
|
|
- SUPPORTED_10baseT_Full |
|
|
- SUPPORTED_MII);
|
|
-
|
|
- cmd->advertising = 0;
|
|
- if (bp->flags & B44_FLAG_ADV_10HALF)
|
|
- cmd->advertising |= ADVERTISED_10baseT_Half;
|
|
- if (bp->flags & B44_FLAG_ADV_10FULL)
|
|
- cmd->advertising |= ADVERTISED_10baseT_Full;
|
|
- if (bp->flags & B44_FLAG_ADV_100HALF)
|
|
- cmd->advertising |= ADVERTISED_100baseT_Half;
|
|
- if (bp->flags & B44_FLAG_ADV_100FULL)
|
|
- cmd->advertising |= ADVERTISED_100baseT_Full;
|
|
- cmd->advertising |= ADVERTISED_Pause | ADVERTISED_Asym_Pause;
|
|
- ethtool_cmd_speed_set(cmd, ((bp->flags & B44_FLAG_100_BASE_T) ?
|
|
- SPEED_100 : SPEED_10));
|
|
- cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
|
|
- DUPLEX_FULL : DUPLEX_HALF;
|
|
- cmd->port = 0;
|
|
- cmd->phy_address = bp->phy_addr;
|
|
- cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
|
|
- XCVR_INTERNAL : XCVR_EXTERNAL;
|
|
- cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
|
|
- AUTONEG_DISABLE : AUTONEG_ENABLE;
|
|
- if (cmd->autoneg == AUTONEG_ENABLE)
|
|
- cmd->advertising |= ADVERTISED_Autoneg;
|
|
- if (!netif_running(dev)){
|
|
- ethtool_cmd_speed_set(cmd, 0);
|
|
- cmd->duplex = 0xff;
|
|
- }
|
|
- cmd->maxtxpkt = 0;
|
|
- cmd->maxrxpkt = 0;
|
|
- return 0;
|
|
+ return phy_ethtool_gset(bp->phydev, cmd);
|
|
}
|
|
|
|
static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct b44 *bp = netdev_priv(dev);
|
|
- u32 speed = ethtool_cmd_speed(cmd);
|
|
-
|
|
- /* We do not support gigabit. */
|
|
- if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
- if (cmd->advertising &
|
|
- (ADVERTISED_1000baseT_Half |
|
|
- ADVERTISED_1000baseT_Full))
|
|
- return -EINVAL;
|
|
- } else if ((speed != SPEED_100 &&
|
|
- speed != SPEED_10) ||
|
|
- (cmd->duplex != DUPLEX_HALF &&
|
|
- cmd->duplex != DUPLEX_FULL)) {
|
|
- return -EINVAL;
|
|
- }
|
|
+ int ret;
|
|
|
|
spin_lock_irq(&bp->lock);
|
|
|
|
- if (cmd->autoneg == AUTONEG_ENABLE) {
|
|
- bp->flags &= ~(B44_FLAG_FORCE_LINK |
|
|
- B44_FLAG_100_BASE_T |
|
|
- B44_FLAG_FULL_DUPLEX |
|
|
- B44_FLAG_ADV_10HALF |
|
|
- B44_FLAG_ADV_10FULL |
|
|
- B44_FLAG_ADV_100HALF |
|
|
- B44_FLAG_ADV_100FULL);
|
|
- if (cmd->advertising == 0) {
|
|
- bp->flags |= (B44_FLAG_ADV_10HALF |
|
|
- B44_FLAG_ADV_10FULL |
|
|
- B44_FLAG_ADV_100HALF |
|
|
- B44_FLAG_ADV_100FULL);
|
|
- } else {
|
|
- if (cmd->advertising & ADVERTISED_10baseT_Half)
|
|
- bp->flags |= B44_FLAG_ADV_10HALF;
|
|
- if (cmd->advertising & ADVERTISED_10baseT_Full)
|
|
- bp->flags |= B44_FLAG_ADV_10FULL;
|
|
- if (cmd->advertising & ADVERTISED_100baseT_Half)
|
|
- bp->flags |= B44_FLAG_ADV_100HALF;
|
|
- if (cmd->advertising & ADVERTISED_100baseT_Full)
|
|
- bp->flags |= B44_FLAG_ADV_100FULL;
|
|
- }
|
|
- } else {
|
|
- bp->flags |= B44_FLAG_FORCE_LINK;
|
|
- bp->flags &= ~(B44_FLAG_100_BASE_T | B44_FLAG_FULL_DUPLEX);
|
|
- if (speed == SPEED_100)
|
|
- bp->flags |= B44_FLAG_100_BASE_T;
|
|
- if (cmd->duplex == DUPLEX_FULL)
|
|
- bp->flags |= B44_FLAG_FULL_DUPLEX;
|
|
- }
|
|
-
|
|
if (netif_running(dev))
|
|
b44_setup_phy(bp);
|
|
|
|
+ ret = phy_ethtool_sset(bp->phydev, cmd);
|
|
+
|
|
spin_unlock_irq(&bp->lock);
|
|
|
|
- return 0;
|
|
+ return ret;
|
|
}
|
|
|
|
static void b44_get_ringparam(struct net_device *dev,
|
|
@@ -2092,20 +2017,81 @@ static const struct ethtool_ops b44_etht
|
|
|
|
static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
- struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct b44 *bp = netdev_priv(dev);
|
|
int err = -EINVAL;
|
|
|
|
if (!netif_running(dev))
|
|
goto out;
|
|
|
|
+ if (!bp->phydev)
|
|
+ return -EINVAL;
|
|
+
|
|
spin_lock_irq(&bp->lock);
|
|
- err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
|
|
+ err = phy_mii_ioctl(bp->phydev, ifr, cmd);
|
|
spin_unlock_irq(&bp->lock);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
+static void b44_adjust_link(struct net_device *dev)
|
|
+{
|
|
+ struct b44 *bp = netdev_priv(dev);
|
|
+ struct phy_device *phydev = bp->phydev;
|
|
+ int status_changed = 0;
|
|
+
|
|
+ BUG_ON(!phydev);
|
|
+
|
|
+ if (bp->old_link != phydev->link) {
|
|
+ status_changed = 1;
|
|
+ bp->old_link = phydev->link;
|
|
+ }
|
|
+
|
|
+ /* reflect duplex change */
|
|
+ if (phydev->link && (bp->old_duplex != phydev->duplex)) {
|
|
+ status_changed = 1;
|
|
+ bp->old_duplex = phydev->duplex;
|
|
+ }
|
|
+
|
|
+ if (status_changed) {
|
|
+ pr_info("%s: link %s", dev->name, phydev->link ?
|
|
+ "UP" : "DOWN");
|
|
+ if (phydev->link)
|
|
+ pr_cont(" - %d/%s", phydev->speed,
|
|
+ phydev->duplex == DUPLEX_FULL ? "full" : "half");
|
|
+ pr_cont("\n");
|
|
+ }
|
|
+}
|
|
+
|
|
+static int b44_mii_probe(struct net_device *dev)
|
|
+{
|
|
+ struct b44 *bp = netdev_priv(dev);
|
|
+ struct phy_device *phydev = NULL;
|
|
+ char phy_id[MII_BUS_ID_SIZE + 3];
|
|
+
|
|
+ /* connect to PHY */
|
|
+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
|
|
+ bp->mii_bus->id, bp->phy_addr);
|
|
+
|
|
+ phydev = phy_connect(dev, phy_id, &b44_adjust_link,
|
|
+ PHY_INTERFACE_MODE_MII);
|
|
+ if (IS_ERR(phydev)) {
|
|
+ netdev_err(dev, "could not attach PHY: %s", phy_id);
|
|
+ bp->phy_addr = B44_PHY_ADDR_NO_PHY;
|
|
+ return PTR_ERR(phydev);
|
|
+ }
|
|
+
|
|
+ bp->phydev = phydev;
|
|
+ bp->old_link = 0;
|
|
+ bp->old_duplex = -1;
|
|
+ bp->phy_addr = phydev->addr;
|
|
+
|
|
+ netdev_info(dev, "attached PHY driver [%s] "
|
|
+ "(mii_bus:phy_addr=%s)\n",
|
|
+ phydev->drv->name, dev_name(&phydev->dev));
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
static int b44_get_invariants(struct b44 *bp)
|
|
{
|
|
struct ssb_device *sdev = bp->sdev;
|
|
@@ -2225,12 +2211,38 @@ static int b44_init_one(struct ssb_devic
|
|
goto err_out_powerdown;
|
|
}
|
|
|
|
- bp->mii_if.dev = dev;
|
|
- bp->mii_if.mdio_read = b44_mii_read;
|
|
- bp->mii_if.mdio_write = b44_mii_write;
|
|
- bp->mii_if.phy_id = bp->phy_addr;
|
|
- bp->mii_if.phy_id_mask = 0x1f;
|
|
- bp->mii_if.reg_num_mask = 0x1f;
|
|
+ bp->mii_bus = mdiobus_alloc();
|
|
+ if (!bp->mii_bus) {
|
|
+ dev_err(sdev->dev, "mdiobus_alloc() failed\n");
|
|
+ err = -ENOMEM;
|
|
+ goto err_out_powerdown;
|
|
+ }
|
|
+
|
|
+ bp->mii_bus->priv = bp;
|
|
+ bp->mii_bus->read = b44_mii_read;
|
|
+ bp->mii_bus->write = b44_mii_write;
|
|
+ bp->mii_bus->name = "b44_eth_mii";
|
|
+ snprintf(bp->mii_bus->id, MII_BUS_ID_SIZE, "%x", instance);
|
|
+ bp->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
|
|
+ if (!bp->mii_bus->irq) {
|
|
+ dev_err(sdev->dev, "mii_bus irq allocation failed\n");
|
|
+ err = -ENOMEM;
|
|
+ goto err_out_mdiobus;
|
|
+ }
|
|
+
|
|
+ memset(bp->mii_bus->irq, PHY_POLL, sizeof(int) * PHY_MAX_ADDR);
|
|
+
|
|
+ err = mdiobus_register(bp->mii_bus);
|
|
+ if (err) {
|
|
+ dev_err(sdev->dev, "failed to register MII bus\n");
|
|
+ goto err_out_mdiobus_irq;
|
|
+ }
|
|
+
|
|
+ err = b44_mii_probe(dev);
|
|
+ if (err) {
|
|
+ dev_err(sdev->dev, "failed to probe MII bus\n");
|
|
+ goto err_out_mdiobus_unregister;
|
|
+ }
|
|
|
|
/* By default, advertise all speed/duplex settings. */
|
|
bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
|
|
@@ -2262,6 +2274,16 @@ static int b44_init_one(struct ssb_devic
|
|
|
|
return 0;
|
|
|
|
+
|
|
+err_out_mdiobus_unregister:
|
|
+ mdiobus_unregister(bp->mii_bus);
|
|
+
|
|
+err_out_mdiobus_irq:
|
|
+ kfree(bp->mii_bus->irq);
|
|
+
|
|
+err_out_mdiobus:
|
|
+ mdiobus_free(bp->mii_bus);
|
|
+
|
|
err_out_powerdown:
|
|
ssb_bus_may_powerdown(sdev->bus);
|
|
|
|
@@ -2275,8 +2297,12 @@ out:
|
|
static void b44_remove_one(struct ssb_device *sdev)
|
|
{
|
|
struct net_device *dev = ssb_get_drvdata(sdev);
|
|
+ struct b44 *bp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
+ mdiobus_unregister(bp->mii_bus);
|
|
+ kfree(bp->mii_bus->irq);
|
|
+ mdiobus_free(bp->mii_bus);
|
|
ssb_device_disable(sdev, 0);
|
|
ssb_bus_may_powerdown(sdev->bus);
|
|
free_netdev(dev);
|
|
--- a/drivers/net/ethernet/broadcom/b44.h
|
|
+++ b/drivers/net/ethernet/broadcom/b44.h
|
|
@@ -396,7 +396,10 @@ struct b44 {
|
|
u32 tx_pending;
|
|
u8 phy_addr;
|
|
u8 force_copybreak;
|
|
- struct mii_if_info mii_if;
|
|
+ struct phy_device *phydev;
|
|
+ struct mii_bus *mii_bus;
|
|
+ int old_link;
|
|
+ int old_duplex;
|
|
};
|
|
|
|
#endif /* _B44_H */
|