c6c731fe31
Add support for NXP layerscape ls1043ardb 64b/32b Dev board. LS1043a is an SoC with 4x64-bit up to 1.6 GHz ARMv8 A53 cores. ls1043ardb support features as: 2GB DDR4, 128MB NOR/512MB NAND, USB3.0, eSDHC, I2C, GPIO, PCIe/Mini-PCIe, 6x1G/1x10G network port, etc. 64b/32b ls1043ardb target is using 4.4 kernel, and rcw/u-boot/fman images from NXP QorIQ SDK release. All of 4.4 kernel patches porting from SDK release or upstream. QorIQ SDK ISOs can be downloaded from this location: http://www.nxp.com/products/software-and-tools/run-time-software/linux-sdk/linux-sdk-for-qoriq-processors:SDKLINUX Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
39 lines
1.5 KiB
Diff
39 lines
1.5 KiB
Diff
From 95d12688fa875f7a00590aaf6de5f34d55531d68 Mon Sep 17 00:00:00 2001
|
|
From: Madalin Bucur <madalin.bucur@freescale.com>
|
|
Date: Thu, 14 Apr 2016 14:12:38 +0300
|
|
Subject: [PATCH 66/70] fmd: add 2.5G SGMII mode suport
|
|
|
|
Signed-off-by: Madalin Bucur <madalin.bucur@freescale.com>
|
|
---
|
|
drivers/net/ethernet/freescale/sdk_dpaa/mac.c | 5 ++++-
|
|
1 file changed, 4 insertions(+), 1 deletion(-)
|
|
|
|
--- a/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
|
|
+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac.c
|
|
@@ -74,6 +74,7 @@ static const char phy_str[][11] = {
|
|
[PHY_INTERFACE_MODE_RGMII_TXID] = "rgmii-txid",
|
|
[PHY_INTERFACE_MODE_RTBI] = "rtbi",
|
|
[PHY_INTERFACE_MODE_XGMII] = "xgmii",
|
|
+ [PHY_INTERFACE_MODE_SGMII_2500] = "sgmii-2500",
|
|
};
|
|
|
|
static phy_interface_t __pure __attribute__((nonnull)) str2phy(const char *str)
|
|
@@ -100,6 +101,7 @@ static const uint16_t phy2speed[] = {
|
|
[PHY_INTERFACE_MODE_RGMII_TXID] = SPEED_1000,
|
|
[PHY_INTERFACE_MODE_RTBI] = SPEED_1000,
|
|
[PHY_INTERFACE_MODE_XGMII] = SPEED_10000,
|
|
+ [PHY_INTERFACE_MODE_SGMII_2500] = SPEED_2500,
|
|
};
|
|
|
|
static struct mac_device * __cold
|
|
@@ -335,7 +337,8 @@ static int __cold mac_probe(struct platf
|
|
mac_dev->max_speed = mac_dev->speed;
|
|
mac_dev->if_support = DTSEC_SUPPORTED;
|
|
/* We don't support half-duplex in SGMII mode */
|
|
- if (strstr(char_prop, "sgmii") || strstr(char_prop, "qsgmii"))
|
|
+ if (strstr(char_prop, "sgmii") || strstr(char_prop, "qsgmii") ||
|
|
+ strstr(char_prop, "sgmii-2500"))
|
|
mac_dev->if_support &= ~(SUPPORTED_10baseT_Half |
|
|
SUPPORTED_100baseT_Half);
|
|
|