EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
74d00a8c38
Openwrt/target/linux/ar71xx/image/generic.mk
Piotr Dymacz 0c6165d21a ar71xx: add support for ALFA Network AP121F 
ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users.
Device is based on Atheros AR9331 WiSoC and is running a custom version
(updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware.

Specification:

- 400/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR1)
- 16 MB of FLASH (SPI NOR)
- 1x 10/100 Mbps Ethernet
- 1T1R 2.4 GHz
- 1x microSD (optional, on separate PCB)
- 3x LED, 1x button, 1x switch
- UART header on PCB

Flash instruction (under U-Boot web recovery mode):

1. Configure PC with static IP 192.168.1.2/24.
2. Connect PC with RJ45 port, press the reset button, power up device,
   wait for first blink of all LEDs (indicates network setup), then keep
   button for 3 following blinks and release it.
3. Open 192.168.1.1 address in your browser and upload sysupgrade image.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-07-22 23:13:55 +02:00

909 lines
28 KiB
Makefile
Raw Blame History

DEVICE_VARS += DAP_SIGNATURE NETGEAR_BOARD_ID NETGEAR_HW_ID NETGEAR_KERNEL_MAGIC ROOTFS_SIZE SEAMA_SIGNATURE
define Build/mkbuffaloimg
$(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
-R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
-K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
-i $@ -o $@.new
mv $@.new $@
endef
define Build/mkwrggimg
$(STAGING_DIR_HOST)/bin/mkwrggimg -b \
-i $@ -o $@.imghdr -d /dev/mtdblock/1 \
-m $(BOARDNAME) -s $(DAP_SIGNATURE) \
-v LEDE -B $(REVISION)
mv $@.imghdr $@
endef
define Build/netgear-squashfs
rm -rf $@.fs $@.squashfs
mkdir -p $@.fs/image
cp $@ $@.fs/image/uImage
$(STAGING_DIR_HOST)/bin/mksquashfs-lzma \
$@.fs $@.squashfs \
-noappend -root-owned -be -b 65536 \
$(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH))
dd if=/dev/zero bs=1k count=1 >> $@.squashfs
mkimage \
-A mips -O linux -T filesystem -C none \
-M $(NETGEAR_KERNEL_MAGIC) \
-a 0xbf070000 -e 0xbf070000 \
-n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
-d $@.squashfs $@
rm -rf $@.squashfs $@.fs
endef
define Build/netgear-uImage
$(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC))
endef
define Build/relocate-kernel
rm -rf $@.relocate
$(CP) ../../generic/image/relocate $@.relocate
$(MAKE) -j1 -C $@.relocate KERNEL_ADDR=$(KERNEL_LOADADDR) CROSS_COMPILE=$(TARGET_CROSS)
( \
dd if=$@.relocate/loader.bin bs=32 conv=sync && \
perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
cat "$@" \
) > "$@.new"
mv "$@.new" "$@"
rm -rf $@.relocate
endef
define Build/seama
$(STAGING_DIR_HOST)/bin/seama -i $@ $(if $(1),$(1),-m "dev=/dev/mtdblock/1" -m "type=firmware")
mv $@.seama $@
endef
define Build/seama-seal
$(call Build/seama,-s $@.seama $(1))
endef
define Build/uImageHiWiFi
# Field ih_name needs to start with "tw150v1"
mkimage -A $(LINUX_KARCH) \
-O linux -T kernel \
-C $(1) -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n 'tw150v1 $(call toupper,$(LINUX_KARCH)) LEDE Linux-$(LINUX_VERSION)' -d $@ $@.new
@mv $@.new $@
endef
define Build/wrgg-pad-rootfs
$(STAGING_DIR_HOST)/bin/padjffs2 $(IMAGE_ROOTFS) -c 64 >>$@
endef
define Device/ap121f
DEVICE_TITLE := ALFA Network AP121F
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage -swconfig
BOARDNAME := AP121F
IMAGE_SIZE := 16064k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,-(firmware)
SUPPORTED_DEVICES := ap121f
IMAGE/sysupgrade.bin = append-kernel | pad-to $$$$(BLOCKSIZE) | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += ap121f
define Device/ap531b0
DEVICE_TITLE := Rockeetech AP531B0
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := AP531B0
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ap531b0
define Device/ap90q
DEVICE_TITLE := YunCore AP90Q
BOARDNAME := AP90Q
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += ap90q
define Device/arduino-yun
DEVICE_TITLE := Arduino Yun
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := Yun
IMAGE_SIZE := 15936k
CONSOLE = ttyATH0,250000
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15936k(firmware),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += arduino-yun
define Device/bsb
DEVICE_TITLE := Smart Electronics Black Swift board
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := BSB
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro
endef
TARGET_DEVICES += bsb
define Device/carambola2
DEVICE_TITLE := 8devices Carambola2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := CARAMBOLA2
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += carambola2
define Device/cf-e316n-v2
DEVICE_TITLE := COMFAST CF-E316N v2
BOARDNAME := CF-E316N-V2
IMAGE_SIZE := 16192k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e316n-v2
define Device/cf-e320n-v2
$(Device/cf-e316n-v2)
DEVICE_TITLE := COMFAST CF-E320N v2
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := CF-E320N-V2
endef
TARGET_DEVICES += cf-e320n-v2
define Device/cf-e380ac-v1
DEVICE_TITLE := COMFAST CF-E380AC v1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := CF-E380AC-V1
IMAGE_SIZE := 16128k
MTDPARTS := spi0.0:128k(u-boot)ro,64k(art)ro,16128k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v1
define Device/cf-e380ac-v2
$(Device/cf-e380ac-v1)
DEVICE_TITLE := COMFAST CF-E380AC v2
BOARDNAME := CF-E380AC-V2
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(art)ro,16000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e380ac-v2
define Device/cf-e520n
DEVICE_TITLE := COMFAST CF-E520N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := CF-E520N
IMAGE_SIZE := 8000k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(art)ro,8000k(firmware),64k(art-backup)ro
endef
TARGET_DEVICES += cf-e520n
define Device/cf-e530n
$(Device/cf-e520n)
DEVICE_TITLE := COMFAST CF-E530N
BOARDNAME := CF-E530N
endef
TARGET_DEVICES += cf-e530n
define Device/cpe505n
DEVICE_TITLE := P&W CPE505N
BOARDNAME := CPE505N
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += cpe505n
define Device/cpe830
$(Device/ap90q)
DEVICE_TITLE := YunCore CPE830
DEVICE_PACKAGES := rssileds
BOARDNAME := CPE830
endef
TARGET_DEVICES += cpe830
define Device/cpe870
DEVICE_TITLE := YunCore CPE870
DEVICE_PACKAGES := rssileds
BOARDNAME := CPE870
IMAGE_SIZE := 7936k
MTDPARTS := spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
endef
TARGET_DEVICES += cpe870
define Device/dragino2
BOARDNAME := DRAGINO2
CONSOLE := ttyATH0,115200
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
DEVICE_TITLE := Dragino 2 (MS14)
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
endef
TARGET_DEVICES += dragino2
define Device/weio
DEVICE_TITLE := WeIO
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := WEIO
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += weio
define Device/gl-ar150
DEVICE_TITLE := GL.iNet GL-AR150
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-AR150
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar150
define Device/gl-ar300
DEVICE_TITLE := GL.iNet GL-AR300
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-AR300
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300
define Device/gl-ar300m
DEVICE_TITLE := GL.iNet GL-AR300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-AR300M
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-ar300m
define Device/gl-domino
DEVICE_TITLE := GL.iNet Domino Pi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := DOMINO
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-domino
define Device/gl-mifi
DEVICE_TITLE := GL.iNet GL-MiFi
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-MIFI
IMAGE_SIZE := 16000k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += gl-mifi
define Device/lima
DEVICE_TITLE := 8devices Lima
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := LIMA
IMAGE_SIZE := 15616k
MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,256k(art)ro,-(firmware)
endef
TARGET_DEVICES += lima
define Device/mr12
DEVICE_TITLE := Meraki MR12
DEVICE_PACKAGES := kmod-spi-gpio
BOARDNAME := MR12
ROOTFS_SIZE := 13440k
IMAGE_SIZE := 15680k
MTDPARTS := spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2240k(kernel),64k(mac),128k(art)ro,15680k@0x80000(firmware)
IMAGE/kernel.bin := append-kernel
IMAGE/rootfs.bin := append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
IMAGES := kernel.bin rootfs.bin sysupgrade.bin
endef
define Device/mr16
$(Device/mr12)
DEVICE_TITLE := Meraki MR16
BOARDNAME := MR16
endef
TARGET_DEVICES += mr12 mr16
define Device/dr344
DEVICE_TITLE := Wallys DR344
BOARDNAME := DR344
KERNEL_SIZE := 1408k
ROOTFS_SIZE := 6336k
IMAGE_SIZE := 7744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware)
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += dr344
define Device/dr531
DEVICE_TITLE := Wallys DR531
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := DR531
IMAGE_SIZE := 7808k
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(partition-table)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += dr531
define Device/wndr3700
DEVICE_TITLE := NETGEAR WNDR3700
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-wndr3700-usb
BOARDNAME := WNDR3700
NETGEAR_KERNEL_MAGIC := 0x33373030
NETGEAR_BOARD_ID := WNDR3700
IMAGE_SIZE := 7680k
MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img factory-NA.img
KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
endef
define Device/wndr3700v2
$(Device/wndr3700)
DEVICE_TITLE := NETGEAR WNDR3700 v2
NETGEAR_BOARD_ID := WNDR3700v2
NETGEAR_KERNEL_MAGIC := 0x33373031
NETGEAR_HW_ID := 29763654+16+64
IMAGE_SIZE := 15872k
MTDPARTS := spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
IMAGES := sysupgrade.bin factory.img
endef
define Device/wndr3800
$(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDR3800
NETGEAR_BOARD_ID := WNDR3800
NETGEAR_HW_ID := 29763654+16+128
endef
define Device/wndr3800ch
$(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDR3800 (Ch)
NETGEAR_BOARD_ID := WNDR3800CH
endef
define Device/wndrmac
$(Device/wndr3700v2)
DEVICE_TITLE := NETGEAR WNDRMAC
NETGEAR_BOARD_ID := WNDRMAC
endef
define Device/wndrmacv2
$(Device/wndr3800)
DEVICE_TITLE := NETGEAR WNDRMAC v2
NETGEAR_BOARD_ID := WNDRMACv2
endef
TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2
define Device/cap324
DEVICE_TITLE := PowerCloud CAP324 Cloud AP
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
IMAGE_SIZE := 15296k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cap324
define Device/cap324-nocloud
DEVICE_TITLE := PowerCloud CAP324 Cloud AP (No-Cloud)
BOARDNAME := CAP324
DEVICE_PROFILE := CAP324
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += cap324-nocloud
define Device/cr3000
DEVICE_TITLE := PowerCloud CR3000 Cloud Router
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
IMAGE_SIZE := 7104k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr3000
define Device/cr3000-nocloud
DEVICE_TITLE := PowerCloud CR3000 (No-Cloud)
BOARDNAME := CR3000
DEVICE_PROFILE := CR3000
IMAGE_SIZE := 7808k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr3000-nocloud
define Device/cr5000
DEVICE_TITLE := PowerCloud CR5000 Cloud Router
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
IMAGE_SIZE := 7104k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art)ro
endef
TARGET_DEVICES += cr5000
define Device/cr5000-nocloud
DEVICE_TITLE := PowerCloud CR5000 (No-Cloud)
DEVICE_PACKAGES := kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-core
BOARDNAME := CR5000
DEVICE_PROFILE := CR5000
IMAGE_SIZE := 7808k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro
endef
TARGET_DEVICES += cr5000-nocloud
define Device/pqi-air-pen
DEVICE_TITLE := PQI Air Pen
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
BOARDNAME := PQI-AIR-PEN
IMAGE_SIZE := 7744k
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(art)ro,64k(NVRAM)ro,7680k(firmware),64k(CONF)
endef
TARGET_DEVICES += pqi-air-pen
define Device/antminer-s1
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antminer-S1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
BOARDNAME := ANTMINER-S1
DEVICE_PROFILE := ANTMINERS1
TPLINK_HWID := 0x04440101
CONSOLE := ttyATH0,115200
endef
define Device/antminer-s3
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antminer-S3
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-crypto-manager kmod-i2c-gpio-custom kmod-usb-hid
BOARDNAME := ANTMINER-S3
DEVICE_PROFILE := ANTMINERS3
TPLINK_HWID := 0x04440301
CONSOLE := ttyATH0,115200
endef
define Device/antrouter-r1
$(Device/tplink-8mlzma)
DEVICE_TITLE := Antrouter-R1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := ANTROUTER-R1
DEVICE_PROFILE := ANTROUTERR1
TPLINK_HWID := 0x44440101
CONSOLE := ttyATH0,115200
endef
define Device/el-m150
$(Device/tplink-8mlzma)
DEVICE_TITLE := EasyLink EL-M150
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := EL-M150
DEVICE_PROFILE := ELM150
TPLINK_HWID := 0x01500101
CONSOLE := ttyATH0,115200
endef
define Device/el-mini
$(Device/tplink-8mlzma)
DEVICE_TITLE := EasyLink EL-MINI
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := EL-MINI
DEVICE_PROFILE := ELMINI
TPLINK_HWID := 0x01530001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini
define Device/gl-inet-6408A-v1
$(Device/tplink-8mlzma)
DEVICE_TITLE := GL.iNet 6408
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-INET
DEVICE_PROFILE := GLINET
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
define Device/gl-inet-6416A-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := GL.iNet 6416
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := GL-INET
DEVICE_PROFILE := GLINET
TPLINK_HWID := 0x08000001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1
define Device/jwap230
DEVICE_TITLE := jjPlus JWAP230
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := JWAP230
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += jwap230
define Device/r602n
DEVICE_TITLE := P&W R602N
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := R602N
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += r602n
define Device/rnx-n360rt
$(Device/tplink-4m)
DEVICE_TITLE := Rosewill RNX-N360RT
BOARDNAME := TL-WR941ND
DEVICE_PROFILE := RNXN360RT
TPLINK_HWID := 0x09410002
TPLINK_HWREV := 0x00420001
endef
TARGET_DEVICES += rnx-n360rt
define Device/mc-mac1200r
$(Device/tplink-8mlzma)
DEVICE_TITLE := Mercury MAC1200R
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := MC-MAC1200R
DEVICE_PROFILE := MAC1200R
TPLINK_HWID := 0x12000001
endef
TARGET_DEVICES += mc-mac1200r
define Device/minibox-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := Gainstrong MiniBox V1.0
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := MINIBOX-V1
DEVICE_PROFILE := MINIBOXV1
TPLINK_HWID := 0x3C000201
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += minibox-v1
define Device/omy-g1
$(Device/tplink-16mlzma)
DEVICE_TITLE := OMYlink OMY-G1
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := OMY-G1
DEVICE_PROFILE := OMYG1
TPLINK_HWID := 0x06660101
endef
define Device/omy-x1
$(Device/tplink-8mlzma)
DEVICE_TITLE := OMYlink OMY-X1
BOARDNAME := OMY-X1
DEVICE_PROFILE := OMYX1
TPLINK_HWID := 0x06660201
endef
TARGET_DEVICES += omy-g1 omy-x1
define Device/onion-omega
$(Device/tplink-16mlzma)
DEVICE_TITLE := Onion Omega
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
BOARDNAME := ONION-OMEGA
DEVICE_PROFILE := OMEGA
TPLINK_HWID := 0x04700001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += onion-omega
define Device/sc1750
DEVICE_TITLE := Abicom SC1750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := SC1750
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc1750
define Device/sc300m
DEVICE_TITLE := Abicom SC300M
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := SC300M
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc300m
define Device/sc450
DEVICE_TITLE := Abicom SC450
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := SC450
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),15744k(firmware),128k(APConfig),128k(kplog),64k(ART)
endef
TARGET_DEVICES += sc450
define Device/smart-300
$(Device/tplink-8mlzma)
DEVICE_TITLE := NC-LINK SMART-300
BOARDNAME := SMART-300
DEVICE_PROFILE := SMART-300
TPLINK_HWID := 0x93410001
endef
TARGET_DEVICES += smart-300
define Device/som9331
$(Device/tplink-8mlzma)
DEVICE_TITLE := OpenEmbed SOM9331
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial
BOARDNAME := SOM9331
DEVICE_PROFILE := SOM9331
TPLINK_HWID := 0x04800054
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += som9331
define Device/sr3200
DEVICE_TITLE := YunCore SR3200
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := SR3200
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro
endef
TARGET_DEVICES += sr3200
define Device/xd3200
$(Device/sr3200)
DEVICE_TITLE := YunCore XD3200
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := XD3200
endef
TARGET_DEVICES += xd3200
define Device/tellstick-znet-lite
$(Device/tplink-16mlzma)
DEVICE_TITLE := TellStick ZNet Lite
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-acm kmod-usb-serial kmod-usb-serial-pl2303
BOARDNAME := TELLSTICK-ZNET-LITE
DEVICE_PROFILE := TELLSTICKZNETLITE
TPLINK_HWID := 0x00726001
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += tellstick-znet-lite
define Device/oolite
$(Device/tplink-16mlzma)
DEVICE_TITLE := Gainstrong OOLITE
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
BOARDNAME := GS-OOLITE
DEVICE_PROFILE := OOLITE
TPLINK_HWID := 0x3C000101
CONSOLE := ttyATH0,115200
endef
TARGET_DEVICES += oolite
define Device/NBG6616
DEVICE_TITLE := ZyXEL NBG6616
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-usb-storage kmod-rtc-pcf8563 kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := NBG6616
KERNEL_SIZE := 2048k
IMAGE_SIZE := 15323k
MTDPARTS := spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware)
CMDLINE += mem=128M
IMAGES := sysupgrade.bin
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
# We cannot currently build a factory image. It is the sysupgrade image
# prefixed with a header (which is actually written into the MTD device).
# The header is 2kiB and is filled with 0xff. The format seems to be:
# 2 bytes: 0x0000
# 2 bytes: checksum of the data partition (big endian)
# 4 bytes: length of the contained image file (big endian)
# 32 bytes: Firmware Version string (NUL terminated, 0xff padded)
# 2 bytes: 0x0000
# 2 bytes: checksum over the header partition (big endian)
# 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded)
# rest: 0xff padding
#
# The checksums are calculated by adding up all bytes and if a 16bit
# overflow occurs, one is added and the sum is masked to 16 bit:
# csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff };
# Should the file have an odd number of bytes then the byte len-0x800 is
# used additionally.
# The checksum for the header is calcualted over the first 2048 bytes with
# the firmware checksum as the placeholder during calculation.
#
# The header is padded with 0xff to the erase block size of the device.
endef
TARGET_DEVICES += NBG6616
define Device/c-55
DEVICE_TITLE := AirTight Networks C-55
DEVICE_PACKAGES := kmod-ath9k
BOARDNAME := C-55
KERNEL_SIZE := 2048k
IMAGE_SIZE := 15872k
MTDPARTS := spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += c-55
define Device/hiwifi-hc6361
DEVICE_TITLE := HiWiFi HC6361
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage \
kmod-fs-ext4 kmod-nls-iso8859-1 e2fsprogs
BOARDNAME := HiWiFi-HC6361
DEVICE_PROFILE := HIWIFI_HC6361
IMAGE_SIZE := 16128k
KERNEL := kernel-bin | patch-cmdline | lzma | uImageHiWiFi lzma
CONSOLE := ttyATH0,115200
MTDPARTS := spi0.0:64k(u-boot)ro,64k(bdinfo)ro,16128k(firmware),64k(backup)ro,64k(art)ro
endef
TARGET_DEVICES += hiwifi-hc6361
define Device/seama
LOADER_TYPE := bin
BLOCKSIZE := 64k
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | seama
KERNEL_INITRAMFS_SUFFIX = $$(KERNEL_SUFFIX).seama
IMAGES := sysupgrade.bin factory.bin
# 64 bytes offset:
# - 28 bytes seama_header
# - 36 bytes of META data (4-bytes aligned)
IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs
IMAGE/sysupgrade.bin := \
$$(IMAGE/default) | seama | pad-rootfs | \
check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := \
$$(IMAGE/default) | seama | pad-rootfs | \
seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
check-size $$$$(IMAGE_SIZE)
SEAMA_SIGNATURE :=
endef
define Device/dir-869-a1
$(Device/seama)
DEVICE_TITLE := D-Link DIR-869 rev. A1
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := DIR-869-A1
IMAGE_SIZE := 15872k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgac54_dlink.2015_dir869
IMAGE/factory.bin := \
$$(IMAGE/default) | pad-rootfs -x 64 | \
seama | seama-seal -m "signature=$$$$(SEAMA_SIGNATURE)" | \
check-size $$$$(IMAGE_SIZE)
endef
define Device/mynet-n600
$(Device/seama)
DEVICE_TITLE := Western Digital My Net N600
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := MYNET-N600
IMAGE_SIZE := 15808k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd16_wd_db600
endef
define Device/mynet-n750
$(Device/seama)
DEVICE_TITLE := Western Digital My Net N750
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := MYNET-N750
IMAGE_SIZE := 15808k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
SEAMA_SIGNATURE := wrgnd13_wd_av
endef
define Device/qihoo-c301
$(Device/seama)
DEVICE_TITLE := Qihoo C301
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-ath10k ath10k-firmware-qca988x
BOARDNAME := QIHOO-C301
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata)
SEAMA_SIGNATURE := wrgac26_qihoo360_360rg
endef
TARGET_DEVICES += dir-869-a1 mynet-n600 mynet-n750 qihoo-c301
define Device/dap-2695-a1
DEVICE_TITLE := D-Link DAP-2695 rev. A1
DEVICE_PACKAGES := ath10k-firmware-qca988x kmod-ath10k
BOARDNAME := DAP-2695-A1
IMAGES := factory.img sysupgrade.bin
IMAGE_SIZE := 15360k
IMAGE/factory.img := append-kernel | pad-offset 65536 160 | append-rootfs | wrgg-pad-rootfs | mkwrggimg | check-size $$$$(IMAGE_SIZE)
IMAGE/sysupgrade.bin := append-kernel | pad-offset 65536 160 | mkwrggimg | append-rootfs | wrgg-pad-rootfs | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | relocate-kernel | lzma
KERNEL_INITRAMFS := $$(KERNEL) | mkwrggimg
MTDPARTS := spi0.0:256k(bootloader)ro,64k(bdcfg)ro,64k(rgdb)ro,64k(langpack)ro,15360k(firmware),448k(captival)ro,64k(certificate)ro,64k(radiocfg)ro
DAP_SIGNATURE := wapac02_dkbs_dap2695
endef
TARGET_DEVICES += dap-2695-a1
define Device/bhr-4grv2
DEVICE_TITLE := Buffalo BHR-4GRV2
BOARDNAME := BHR-4GRV2
ROOTFS_SIZE := 14528k
KERNEL_SIZE := 1472k
IMAGE_SIZE := 16000k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
endef
TARGET_DEVICES += bhr-4grv2
define Device/wpj-16m
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
MTDPARTS := spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro
IMAGE_SIZE := 16128k
endef
define Device/wpj342
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ342 (16MB flash)
BOARDNAME := WPJ342
endef
define Device/wpj344
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ344 (16MB flash)
BOARDNAME := WPJ344
endef
define Device/wpj531
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ531 (16MB flash)
BOARDNAME := WPJ531
endef
define Device/wpj558
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ558 (16MB flash)
BOARDNAME := WPJ558
endef
define Device/wpj563
$(Device/wpj-16m)
DEVICE_TITLE := Compex WPJ563 (16MB flash)
BOARDNAME := WPJ563
endef
TARGET_DEVICES += wpj342 wpj344 wpj531 wpj558 wpj563
define Device/wrtnode2q
DEVICE_TITLE := WRTnode2Q
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage
BOARDNAME := WRTNODE2Q
IMAGE_SIZE := 16064k
MTDPARTS := spi0.0:192k(u-boot)ro,64k(u-boot-env),64k(art)ro,16064k(firmware),16384k@0x0(fullflash)
endef
TARGET_DEVICES += wrtnode2q
define Device/zbt-we1526
DEVICE_TITLE := Zbtlink ZBT-WE1526
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
BOARDNAME := ZBT-WE1526
IMAGE_SIZE := 16000k
KERNEL_SIZE := 1472k
ROOTFS_SIZE := 14528k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware)
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += zbt-we1526
define Device/fritz300e
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools
BOARDNAME := FRITZ300E
SUPPORTED_DEVICES := fritz300e
IMAGE_SIZE := 15232k
KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
append-squashfs-fakeroot-be | pad-to 256 | \
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += fritz300e
Reference in New Issue View Git Blame Copy Permalink