b0235c0d8d
Make some cosmetic changes in the Buffalo LinkStation LS421DE NAS: - Delete pointless #xxx-cells - bootargs: replace earlyprintk with earlycon and remove unneeded args. - Separate pinmux nodes with empty lines. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
440 lines
8.4 KiB
Plaintext
440 lines
8.4 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
|
/*
|
|
* Device Tree file for Buffalo LinkStation LS421DE
|
|
*
|
|
* Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "armada-370.dtsi"
|
|
#include "mvebu-linkstation-fan.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/thermal/thermal.h>
|
|
|
|
/ {
|
|
model = "Buffalo LinkStation LS421DE";
|
|
compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
led-boot = &led_boot;
|
|
led-failsafe = &led_failsafe;
|
|
led-running = &led_power;
|
|
led-upgrade = &led_upgrade;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
append-rootblock = "nullparameter="; /* override the bootloader args */
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x20000000>; /* 512 MB */
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
|
|
MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000
|
|
MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>;
|
|
};
|
|
|
|
system_fan: gpio_fan {
|
|
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
|
|
&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
|
|
|
#cooling-cells = <2>;
|
|
};
|
|
|
|
thermal-zones {
|
|
hdd-thermal {
|
|
polling-delay = <20000>;
|
|
polling-delay-passive = <2000>;
|
|
|
|
thermal-sensors = <&hdd0_temp>; /* only one drivetemp sensor is supported */
|
|
|
|
trips {
|
|
hdd_alert1: trip1 {
|
|
temperature = <36000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
hdd_alert2: trip2 {
|
|
temperature = <44000>;
|
|
hysteresis = <2000>;
|
|
type = "active";
|
|
};
|
|
hdd_alert3: trip3 {
|
|
temperature = <52000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
hdd_crit: trip4 {
|
|
temperature = <60000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map1 {
|
|
trip = <&hdd_alert1>;
|
|
cooling-device = <&system_fan THERMAL_NO_LIMIT 1>;
|
|
};
|
|
map2 {
|
|
trip = <&hdd_alert2>;
|
|
cooling-device = <&system_fan 2 2>;
|
|
};
|
|
map3 {
|
|
trip = <&hdd_alert3>;
|
|
cooling-device = <&system_fan 3 THERMAL_NO_LIMIT>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ethphy-thermal {
|
|
polling-delay = <20000>;
|
|
polling-delay-passive = <2000>;
|
|
|
|
thermal-sensors = <ðphy0>;
|
|
|
|
trips {
|
|
ethphy_alert1: trip1 {
|
|
temperature = <65000>;
|
|
hysteresis = <4000>;
|
|
type = "passive";
|
|
};
|
|
|
|
ethphy_crit: trip2 {
|
|
temperature = <100000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
|
|
cooling-maps {
|
|
map1 {
|
|
trip = <ðphy_alert1>;
|
|
cooling-device = <&system_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
|
};
|
|
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio_keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-0 = <&pmx_buttons>;
|
|
pinctrl-names = "default";
|
|
|
|
power {
|
|
label = "Power Switch";
|
|
linux,code = <KEY_POWER>;
|
|
linux,input-type = <EV_SW>;
|
|
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
function {
|
|
label = "Function Button";
|
|
linux,code = <KEY_CONFIG>;
|
|
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio_leds {
|
|
compatible = "gpio-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmx_leds1 &pmx_leds2>;
|
|
|
|
system_red {
|
|
label = "ls421de:red:system";
|
|
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_power: power_white {
|
|
label = "ls421de:white:power";
|
|
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
|
|
led_failsafe: power_red {
|
|
label = "ls421de:red:power";
|
|
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_upgrade: power_orange {
|
|
label = "ls421de:orange:power";
|
|
gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
led_boot: system_white {
|
|
label = "ls421de:white:system";
|
|
gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
hdd1_red {
|
|
label = "ls421de:red:hdd1";
|
|
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "ata1";
|
|
};
|
|
|
|
hdd2_red {
|
|
label = "ls421de:red:hdd2";
|
|
gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
|
|
linux,default-trigger = "ata2";
|
|
};
|
|
};
|
|
|
|
regulators {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
|
|
pinctrl-names = "default";
|
|
|
|
usb_power: regulator@0 {
|
|
compatible = "regulator-fixed";
|
|
reg = <0>;
|
|
regulator-name = "USB";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata1_power: regulator@1 {
|
|
compatible = "regulator-fixed";
|
|
reg = <1>;
|
|
regulator-name = "HDD1";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
startup-delay-us = <2000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
sata2_power: regulator@2 {
|
|
compatible = "regulator-fixed";
|
|
reg = <2>;
|
|
regulator-name = "HDD2";
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
startup-delay-us = <4000000>;
|
|
enable-active-high;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&coherencyfab {
|
|
broken-idle;
|
|
};
|
|
|
|
ð1 {
|
|
pinctrl-0 = <&ge1_rgmii_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
phy-handle = <ðphy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
pinctrl-names = "default";
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
rs5c372a: rs5c372a@32 {
|
|
compatible = "ricoh,rs5c372a";
|
|
reg = <0x32>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&mdio {
|
|
pinctrl-0 = <&mdio_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
|
|
reg = <0>;
|
|
marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */
|
|
<0x3 0x11 0x1 0x4401>, /* LED polarity */
|
|
<0x3 0x12 0x1 0x4905>; /* LED timer */
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&pciec {
|
|
status = "okay";
|
|
/* Connected to uPD720202 USB 3.0 Host */
|
|
pcie@1,0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pmsu {
|
|
pinctrl-0 = <&pmx_power_cpu>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
&rtc {
|
|
status = "disabled";
|
|
};
|
|
|
|
&sata {
|
|
nr-ports = <2>;
|
|
status = "okay";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hdd0_temp: sata-port@0 {
|
|
reg = <0>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
|
|
hdd1_temp: sata-port@1 {
|
|
reg = <1>;
|
|
#thermal-sensor-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&sdio {
|
|
pinctrl-0 = <&sdio_pins2>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
/* No CD or WP GPIOs */
|
|
broken-cd;
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@0 {
|
|
reg = <0>;
|
|
label = "pxa3xx_nand-0";
|
|
nand-rb = <0>;
|
|
marvell,nand-keep-config;
|
|
nand-on-flash-bbt;
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "kernel";
|
|
reg = <0x00000000 0x02000000>; /* 32 MiB */
|
|
};
|
|
|
|
partition@2000000 {
|
|
label = "ubi";
|
|
reg = <0x02000000 0x1e000000>; /* 480 MiB */
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
pinctrl-0 = <&spi0_pins2>;
|
|
pinctrl-names = "default";
|
|
|
|
spi-flash@0 {
|
|
compatible = "mxicy,mx25l8005", "jedec,spi-nor";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <50000000>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
reg = <0x00000 0xf0000>; /* 960 KiB*/
|
|
label = "u-boot";
|
|
read-only;
|
|
};
|
|
partition@f0000 {
|
|
reg = <0xf0000 0x10000>; /* 64 KiB */
|
|
label = "u-boot-env";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl {
|
|
pmx_power_cpu: pmx-power-cpu {
|
|
marvell,pins = "mpp4";
|
|
marvell,function = "vdd";
|
|
};
|
|
|
|
pmx_power_usb: pmx-power-usb {
|
|
marvell,pins = "mpp5";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_power_hdd1: pmx-power-hdd1 {
|
|
marvell,pins = "mpp8";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_power_hdd2: pmx-power-hdd2 {
|
|
marvell,pins = "mpp9";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_fan_lock: pmx-fan-lock {
|
|
marvell,pins = "mpp10";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_hdd_present: pmx-hdd-present {
|
|
marvell,pins = "mpp11", "mpp12";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_fan_high: pmx-fan-high {
|
|
marvell,pins = "mpp13";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_fan_low: pmx-fan-low {
|
|
marvell,pins = "mpp14";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_buttons: pmx-buttons {
|
|
marvell,pins = "mpp15", "mpp16";
|
|
marvell,function = "gpio";
|
|
};
|
|
|
|
pmx_leds1: pmx-leds {
|
|
marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61";
|
|
marvell,function = "gpo";
|
|
};
|
|
|
|
pmx_leds2: pmx-leds {
|
|
marvell,pins = "mpp55", "mpp57", "mpp62";
|
|
marvell,function = "gpio";
|
|
};
|
|
};
|