Openwrt

Openwrt build for Asrock G10 Router

Go to file

Felix Fietkau 74146c62c0 ar8216: fix ATU flushing The functionality to flush the address translation table contains two bugs which luckily compensate each other. 1. Just setting the operation is not sufficient to perform the flushing. The "active" bit needs to be set to actually trigger an action. For the vtu operations this is implemented correctly. 2. ar8xxx_phy_read_status is called every 2s by the phy state machine to check for link changes. This would have caused an ATU flush every 2s. Fix the chip-specific ATU flush functions and remove the ATU flush call from ar8xxx_phy_read_status. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 44101		2015-01-24 19:41:51 +00:00
config	Support for building an hardened OpenWRT	2015-01-17 14:31:30 +00:00
docs
include	include, base-files: align default repository url with changed buildbot structure	2015-01-23 13:09:54 +00:00
package	mac80211/hostapd: fix HT mode setup for RSN ad-hoc networks	2015-01-24 19:27:22 +00:00
scripts	scripts: remote-gdb: fix target / libc matching on directory names	2015-01-23 12:41:06 +00:00
target	ar8216: fix ATU flushing	2015-01-24 19:41:51 +00:00
toolchain	Support for building an hardened OpenWRT	2015-01-17 14:31:30 +00:00
tools	ar71xx: add support for TL-WA701ND v2	2015-01-20 15:48:07 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	scripts/config: sync with linux upstream	2015-01-08 14:33:53 +00:00
feeds.conf.default	Move telephony feed to github	2014-12-11 10:30:51 +00:00
LICENSE
Makefile	Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"	2014-10-22 10:47:26 +00:00
README
rules.mk	build: do not assume that gcc-{ar,ranlib,nm} is usable with an external toolchain	2015-01-10 16:14:25 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org