Openwrt build for Asrock G10 Router
73f61a64eb
The following error is displayed during network configuration on any device that has DEVICE_TYPE set to something else then router, or has brctl functionality disabled through some other method: "brctl: SIOCGIFBR: Package not installed" This is due to the unbridge function being called, which uses "brctl show" to determine if the interface is bridged. Signed-off-by: Ithamar R. Adema <ithamar.adema@team-embedded.nl> SVN-Revision: 20218 |
||
---|---|---|
docs | ||
include | ||
package | ||
scripts | ||
target | ||
toolchain | ||
tools | ||
.gitignore | ||
BSDmakefile | ||
Config.in | ||
feeds.conf.default | ||
LICENSE | ||
Makefile | ||
README | ||
rules.mk |
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flashing/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org