Openwrt build for Asrock G10 Router
738d610209
This patch adds a chat script and makes some modifications to /lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in addition to the existing GPRS/UMTS support. Modifications to 3g.sh are: - Added 'chat' variable to point at the appropriate script - Added 'evdo' and 'cdma' as acceptable 'service' values, and skip the whole gcom initialization bit - Changed pppd connection speed from 460800 to more widely supported 115200; in my experience, this is not your actual connection speed, but at what speed pppd sends setup commands to the interface. This kinda eliminates the need for /etc/ppp/3g.connect - I think I've replaced that functionality, but in a slightly more standardized method, using the 'connect' variable understood by PPP. Signed-off-by: RB<aoz.syn@gmail.com> SVN-Revision: 10347 |
||
|---|---|---|
| docs | ||
| include | ||
| package | ||
| scripts | ||
| target | ||
| toolchain | ||
| tools | ||
| .gitignore | ||
| BSDmakefile | ||
| Config.in | ||
| feeds.conf | ||
| LICENSE | ||
| Makefile | ||
| README | ||
| rules.mk | ||
This is the buildsystem for the OpenWrt Linux distribution Please use "make menuconfig" to configure your appreciated configuration for the toolchain and firmware. You need to have installed gcc, binutils, patch, bzip2, flex, bison, make, gettext, pkg-config, unzip, libz-dev and libc headers. Simply running 'make' will build your firmware. It will download all sources, build the cross-compile toolchain, the kernel and all choosen applications. You can use scripts/flash.sh for remotely updating your embedded system via tftp. The OpenWrt system is documented in docs/. You will need a LaTeX distribution and the tex4ht package to build the documentation. Type make -C docs/ to build it. Building your own firmware you need to have access to a Linux, BSD or MacOSX system. Cygwin will not be supported because of the lack of case sensitiveness. Sunshine! Your OpenWrt Project http://openwrt.org