Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich 6eec8009ba ipset: remove dependency on iptables-mod-ipset - technically it does not depend on it and the iptables matches are now part of the base SVN-Revision: 36685		2013-05-21 13:00:28 +00:00
docs
include	netfilter: move time, mark, set matches and MARK, REDIRECT, SET targets into base iptables package - drop iptables-mod-ipset	2013-05-21 12:58:15 +00:00
package	ipset: remove dependency on iptables-mod-ipset - technically it does not depend on it and the iptables matches are now part of the base	2013-05-21 13:00:28 +00:00
scripts	build: add config symbols for different ARM arch levels	2013-05-13 15:04:58 +00:00
target	ar71xx: disable jffs2 by default, it confuses users since many devices have incompatible eraseblock sizes	2013-05-21 09:45:46 +00:00
toolchain	toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues	2013-05-09 20:50:49 +00:00
tools	firmware-utils/mkcameofw: allow to use combined kernel image	2013-05-08 17:11:08 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	Config.in: expose symbols specific to lxc in separate item	2013-05-17 11:27:20 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk	toolchain: eliminate the INSTALL_LIBSTDCPP config symbol and make c++ support mandatory - fixes recursive config symbol dependency issues	2013-05-09 20:50:49 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org