Openwrt

Openwrt build for Asrock G10 Router

Go to file

John Crispin 6dd7875412 ar71xx: Register reset button on UBNT AirGW The airGateway has a reset button connected to GPIO 12, so we should use it. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> SVN-Revision: 41794		2014-07-21 19:26:50 +00:00
config	x86: add back a line accidentally removed in r41763	2014-07-20 08:20:14 +00:00
docs
include	target/linux/*/image/Makefile: eliminate more LINUX_DIR users	2014-07-21 18:42:11 +00:00
package	lantiq-dsl: add 2 ugly workarounds for the IB to work	2014-07-21 18:41:46 +00:00
scripts	scripts/om-fwupgradecfg-gen.sh: add support for the OM5P	2014-07-20 17:30:48 +00:00
target	ar71xx: Register reset button on UBNT AirGW	2014-07-21 19:26:50 +00:00
toolchain	toolchain/gcc: pass proper flags for arm hard float build	2014-07-14 20:28:53 +00:00
tools	firmware-utils/mktplinkfw: add support for GL.iNet v1	2014-07-13 18:21:08 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds.conf.default: add management feed	2014-06-12 15:08:08 +00:00
LICENSE
Makefile	build: remove duplicate variable definitions	2014-03-21 15:54:11 +00:00
README
rules.mk	partially revert "build: remove check for nonexistant CONFIG_TAR_VERBOSITY variable and move TAR_OPTIONS to unpack.mk"	2014-03-22 19:52:48 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org