Openwrt/target/linux/bcm27xx/patches-5.4/950-0277-drm-vc4-Add-support-for-margins-to-fkms.patch
Álvaro Fernández Rojas 77e97abf12 bcm27xx: update to latest patches from RPi foundation
Also removes random module and switches to new bcm2711 thermal driver.
Boot tested on RPi 4B v1.1 4G.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2020-05-28 19:12:43 +02:00

329 lines
10 KiB
Diff

From 8a7170d2ad05ae00733e0535b281ce2e682c6f65 Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.org>
Date: Fri, 19 Jul 2019 15:35:13 +0100
Subject: [PATCH] drm/vc4: Add support for margins to fkms
Allows for overscan to be configured under FKMS.
NB This is rescaling the planes, not reducing the size of the
display mode.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
---
drivers/gpu/drm/vc4/vc4_firmware_kms.c | 241 +++++++++++++++++++------
1 file changed, 190 insertions(+), 51 deletions(-)
--- a/drivers/gpu/drm/vc4/vc4_firmware_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_firmware_kms.c
@@ -259,6 +259,23 @@ static inline struct vc4_crtc *to_vc4_cr
return container_of(crtc, struct vc4_crtc, base);
}
+struct vc4_crtc_state {
+ struct drm_crtc_state base;
+
+ struct {
+ unsigned int left;
+ unsigned int right;
+ unsigned int top;
+ unsigned int bottom;
+ } margins;
+};
+
+static inline struct vc4_crtc_state *
+to_vc4_crtc_state(struct drm_crtc_state *crtc_state)
+{
+ return (struct vc4_crtc_state *)crtc_state;
+}
+
struct vc4_fkms_encoder {
struct drm_encoder base;
bool hdmi_monitor;
@@ -367,17 +384,127 @@ static int vc4_plane_set_blank(struct dr
return ret;
}
+static void vc4_fkms_crtc_get_margins(struct drm_crtc_state *state,
+ unsigned int *left, unsigned int *right,
+ unsigned int *top, unsigned int *bottom)
+{
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+ struct drm_connector_state *conn_state;
+ struct drm_connector *conn;
+ int i;
+
+ *left = vc4_state->margins.left;
+ *right = vc4_state->margins.right;
+ *top = vc4_state->margins.top;
+ *bottom = vc4_state->margins.bottom;
+
+ /* We have to interate over all new connector states because
+ * vc4_fkms_crtc_get_margins() might be called before
+ * vc4_fkms_crtc_atomic_check() which means margins info in
+ * vc4_crtc_state might be outdated.
+ */
+ for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+ if (conn_state->crtc != state->crtc)
+ continue;
+
+ *left = conn_state->tv.margins.left;
+ *right = conn_state->tv.margins.right;
+ *top = conn_state->tv.margins.top;
+ *bottom = conn_state->tv.margins.bottom;
+ break;
+ }
+}
+
+static int vc4_fkms_margins_adj(struct drm_plane_state *pstate,
+ struct set_plane *plane)
+{
+ unsigned int left, right, top, bottom;
+ int adjhdisplay, adjvdisplay;
+ struct drm_crtc_state *crtc_state;
+
+ crtc_state = drm_atomic_get_new_crtc_state(pstate->state,
+ pstate->crtc);
+
+ vc4_fkms_crtc_get_margins(crtc_state, &left, &right, &top, &bottom);
+
+ if (!left && !right && !top && !bottom)
+ return 0;
+
+ if (left + right >= crtc_state->mode.hdisplay ||
+ top + bottom >= crtc_state->mode.vdisplay)
+ return -EINVAL;
+
+ adjhdisplay = crtc_state->mode.hdisplay - (left + right);
+ plane->dst_x = DIV_ROUND_CLOSEST(plane->dst_x * adjhdisplay,
+ (int)crtc_state->mode.hdisplay);
+ plane->dst_x += left;
+ if (plane->dst_x > (int)(crtc_state->mode.hdisplay - left))
+ plane->dst_x = crtc_state->mode.hdisplay - left;
+
+ adjvdisplay = crtc_state->mode.vdisplay - (top + bottom);
+ plane->dst_y = DIV_ROUND_CLOSEST(plane->dst_y * adjvdisplay,
+ (int)crtc_state->mode.vdisplay);
+ plane->dst_y += top;
+ if (plane->dst_y > (int)(crtc_state->mode.vdisplay - top))
+ plane->dst_y = crtc_state->mode.vdisplay - top;
+
+ plane->dst_w = DIV_ROUND_CLOSEST(plane->dst_w * adjhdisplay,
+ crtc_state->mode.hdisplay);
+ plane->dst_h = DIV_ROUND_CLOSEST(plane->dst_h * adjvdisplay,
+ crtc_state->mode.vdisplay);
+
+ if (!plane->dst_w || !plane->dst_h)
+ return -EINVAL;
+
+ return 0;
+}
+
static void vc4_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct drm_plane_state *state = plane->state;
+
+ /*
+ * Do NOT set now, as we haven't checked if the crtc is active or not.
+ * Set from vc4_plane_set_blank instead.
+ *
+ * If the CRTC is on (or going to be on) and we're enabled,
+ * then unblank. Otherwise, stay blank until CRTC enable.
+ */
+ if (state->crtc->state->active)
+ vc4_plane_set_blank(plane, false);
+}
+
+static void vc4_plane_atomic_disable(struct drm_plane *plane,
+ struct drm_plane_state *old_state)
+{
+ struct drm_plane_state *state = plane->state;
+ struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
+
+ DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n",
+ plane->base.id, plane->name,
+ state->crtc_w,
+ state->crtc_h,
+ vc4_plane->mb.plane.vc_image_type,
+ state->crtc_x,
+ state->crtc_y);
+ vc4_plane_set_blank(plane, true);
+}
+
+static bool plane_enabled(struct drm_plane_state *state)
+{
+ return state->fb && state->crtc;
+}
+
+static int vc4_plane_to_mb(struct drm_plane *plane,
+ struct mailbox_set_plane *mb,
+ struct drm_plane_state *state)
+{
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *bo = drm_fb_cma_get_gem_obj(fb, 0);
const struct drm_format_info *drm_fmt = fb->format;
const struct vc_image_format *vc_fmt =
vc4_get_vc_image_fmt(drm_fmt->format);
- struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
- struct mailbox_set_plane *mb = &vc4_plane->mb;
int num_planes = fb->format->num_planes;
struct drm_display_mode *mode = &state->crtc->mode;
unsigned int rotation = SUPPORTED_ROTATIONS;
@@ -419,25 +546,7 @@ static void vc4_plane_atomic_update(stru
break;
}
- /* FIXME: If the dest rect goes off screen then clip the src rect so we
- * don't have off-screen pixels.
- */
- if (plane->type == DRM_PLANE_TYPE_CURSOR) {
- /* There is no scaling on the cursor plane, therefore the calcs
- * to alter the source crop as the cursor goes off the screen
- * are simple.
- */
- if (mb->plane.dst_x + mb->plane.dst_w > mode->hdisplay) {
- mb->plane.dst_w = mode->hdisplay - mb->plane.dst_x;
- mb->plane.src_w = (mode->hdisplay - mb->plane.dst_x)
- << 16;
- }
- if (mb->plane.dst_y + mb->plane.dst_h > mode->vdisplay) {
- mb->plane.dst_h = mode->vdisplay - mb->plane.dst_y;
- mb->plane.src_h = (mode->vdisplay - mb->plane.dst_y)
- << 16;
- }
- }
+ vc4_fkms_margins_adj(state, &mb->plane);
if (num_planes > 1) {
/* Assume this must be YUV */
@@ -527,38 +636,19 @@ static void vc4_plane_atomic_update(stru
state->alpha,
state->normalized_zpos);
- /*
- * Do NOT set now, as we haven't checked if the crtc is active or not.
- * Set from vc4_plane_set_blank instead.
- *
- * If the CRTC is on (or going to be on) and we're enabled,
- * then unblank. Otherwise, stay blank until CRTC enable.
- */
- if (state->crtc->state->active)
- vc4_plane_set_blank(plane, false);
+ return 0;
}
-static void vc4_plane_atomic_disable(struct drm_plane *plane,
- struct drm_plane_state *old_state)
+static int vc4_plane_atomic_check(struct drm_plane *plane,
+ struct drm_plane_state *state)
{
- //struct vc4_dev *vc4 = to_vc4_dev(plane->dev);
- struct drm_plane_state *state = plane->state;
struct vc4_fkms_plane *vc4_plane = to_vc4_fkms_plane(plane);
- DRM_DEBUG_ATOMIC("[PLANE:%d:%s] plane disable %dx%d@%d +%d,%d\n",
- plane->base.id, plane->name,
- state->crtc_w,
- state->crtc_h,
- vc4_plane->mb.plane.vc_image_type,
- state->crtc_x,
- state->crtc_y);
- vc4_plane_set_blank(plane, true);
-}
+ if (!plane_enabled(state))
+ return 0;
+
+ return vc4_plane_to_mb(plane, &vc4_plane->mb, state);
-static int vc4_plane_atomic_check(struct drm_plane *plane,
- struct drm_plane_state *state)
-{
- return 0;
}
/* Called during init to allocate the plane's atomic state. */
@@ -909,8 +999,23 @@ vc4_crtc_mode_valid(struct drm_crtc *crt
static int vc4_crtc_atomic_check(struct drm_crtc *crtc,
struct drm_crtc_state *state)
{
- DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n",
- crtc->base.id);
+ struct vc4_crtc_state *vc4_state = to_vc4_crtc_state(state);
+ struct drm_connector *conn;
+ struct drm_connector_state *conn_state;
+ int i;
+
+ DRM_DEBUG_KMS("[CRTC:%d] crtc_atomic_check.\n", crtc->base.id);
+
+ for_each_new_connector_in_state(state->state, conn, conn_state, i) {
+ if (conn_state->crtc != crtc)
+ continue;
+
+ vc4_state->margins.left = conn_state->tv.margins.left;
+ vc4_state->margins.right = conn_state->tv.margins.right;
+ vc4_state->margins.top = conn_state->tv.margins.top;
+ vc4_state->margins.bottom = conn_state->tv.margins.bottom;
+ break;
+ }
return 0;
}
@@ -1011,6 +1116,33 @@ static int vc4_page_flip(struct drm_crtc
return drm_atomic_helper_page_flip(crtc, fb, event, flags, ctx);
}
+static struct drm_crtc_state *
+vc4_crtc_duplicate_state(struct drm_crtc *crtc)
+{
+ struct vc4_crtc_state *vc4_state, *old_vc4_state;
+
+ vc4_state = kzalloc(sizeof(*vc4_state), GFP_KERNEL);
+ if (!vc4_state)
+ return NULL;
+
+ old_vc4_state = to_vc4_crtc_state(crtc->state);
+ vc4_state->margins = old_vc4_state->margins;
+
+ __drm_atomic_helper_crtc_duplicate_state(crtc, &vc4_state->base);
+ return &vc4_state->base;
+}
+
+static void
+vc4_crtc_reset(struct drm_crtc *crtc)
+{
+ if (crtc->state)
+ __drm_atomic_helper_crtc_destroy_state(crtc->state);
+
+ crtc->state = kzalloc(sizeof(*crtc->state), GFP_KERNEL);
+ if (crtc->state)
+ crtc->state->crtc = crtc;
+}
+
static int vc4_fkms_enable_vblank(struct drm_crtc *crtc)
{
struct vc4_crtc *vc4_crtc = to_vc4_crtc(crtc);
@@ -1038,8 +1170,8 @@ static const struct drm_crtc_funcs vc4_c
.set_property = NULL,
.cursor_set = NULL, /* handled by drm_mode_cursor_universal */
.cursor_move = NULL, /* handled by drm_mode_cursor_universal */
- .reset = drm_atomic_helper_crtc_reset,
- .atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+ .reset = vc4_crtc_reset,
+ .atomic_duplicate_state = vc4_crtc_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
.enable_vblank = vc4_fkms_enable_vblank,
.disable_vblank = vc4_fkms_disable_vblank,
@@ -1291,6 +1423,13 @@ vc4_fkms_connector_init(struct drm_devic
connector->interlace_allowed = 0;
}
+ /* Create and attach TV margin props to this connector. */
+ ret = drm_mode_create_tv_margin_properties(dev);
+ if (ret)
+ return ERR_PTR(ret);
+
+ drm_connector_attach_tv_margin_properties(connector);
+
connector->polled = (DRM_CONNECTOR_POLL_CONNECT |
DRM_CONNECTOR_POLL_DISCONNECT);