Openwrt build for Asrock G10 Router
Go to file
2007-07-18 12:13:37 +00:00
docs fix docs compile targets 2007-07-10 16:38:05 +00:00
include prevent the new config changes from interfering with kernel_menuconfig 2007-07-18 12:05:59 +00:00
package add missing kconfig lines 2007-07-18 11:53:07 +00:00
scripts allow kconfig symbols to be shared between packages 2007-07-18 11:53:25 +00:00
target Load the appropriate MTD driver if we were booted from NOR/NAND only, use the TRX mapping by default if bootloader unknown 2007-07-18 12:13:37 +00:00
toolchain fix cflags for xscale (#2026) 2007-07-11 05:18:19 +00:00
tools Remove patch-cmdline from the packages and move it tools tools/. adm5120 and rb532 do use it for procuding ready-to-use kernels (#1631) 2007-07-01 09:45:27 +00:00
.gitignore
BSDmakefile
Config.in
LICENSE
Makefile add kernel_oldconfig target 2007-07-16 10:03:03 +00:00
README
rules.mk

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org