Openwrt/target/linux/ipq40xx/patches-4.19/048-crypto-qce-use-AES-fallback-for-small-requests.patch

From 2d3b6fae7d1a2ad821769440daa91d7eec5c8250 Mon Sep 17 00:00:00 2001
From: Eneas U de Queiroz <cotequeiroz@gmail.com>
Date: Fri, 20 Dec 2019 09:41:44 -0300
Subject: [PATCH] crypto: qce - use AES fallback for small requests

Process small blocks using the fallback cipher, as a workaround for an
observed failure (DMA-related, apparently) when computing the GCM ghash
key.  This brings a speed gain as well, since it avoids the latency of
using the hardware engine to process small blocks.

Using software for all 16-byte requests would be enough to make GCM
work, but to increase performance, a larger threshold would be better.
Measuring the performance of supported ciphers with openssl speed,
software matches hardware at around 768-1024 bytes.

Considering the 256-bit ciphers, software is 2-3 times faster than qce
at 256-bytes, 30% faster at 512, and about even at 768-bytes.  With
128-bit keys, the break-even point would be around 1024-bytes.

This adds the 'aes_sw_max_len' parameter, to set the largest request
length processed by the software fallback.  Its default is being set to
512 bytes, a little lower than the break-even point, to balance the cost
in CPU usage.

Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>

--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -585,6 +585,29 @@ config CRYPTO_DEV_QCE
 	  hardware. To compile this driver as a module, choose M here. The
 	  module will be called qcrypto.
 
+config CRYPTO_DEV_QCE_SW_MAX_LEN
+	int "Default maximum request size to use software for AES"
+	depends on CRYPTO_DEV_QCE && CRYPTO_DEV_QCE_SKCIPHER
+	default 512
+	help
+	  This sets the default maximum request size to perform AES requests
+	  using software instead of the crypto engine.  It can be changed by
+	  setting the aes_sw_max_len parameter.
+
+	  Small blocks are processed faster in software than hardware.
+	  Considering the 256-bit ciphers, software is 2-3 times faster than
+	  qce at 256-bytes, 30% faster at 512, and about even at 768-bytes.
+	  With 128-bit keys, the break-even point would be around 1024-bytes.
+
+	  The default is set a little lower, to 512 bytes, to balance the
+	  cost in CPU usage.  The minimum recommended setting is 16-bytes
+	  (1 AES block), since AES-GCM will fail if you set it lower.
+	  Setting this to zero will send all requests to the hardware.
+
+	  Note that 192-bit keys are not supported by the hardware and are
+	  always processed by the software fallback, and all DES requests
+	  are done by the hardware.
+
 config CRYPTO_DEV_QCOM_RNG
 	tristate "Qualcomm Random Number Generator Driver"
 	depends on ARCH_QCOM || COMPILE_TEST
--- a/drivers/crypto/qce/skcipher.c
+++ b/drivers/crypto/qce/skcipher.c
@@ -13,6 +13,7 @@
 
 #include <linux/device.h>
 #include <linux/interrupt.h>
+#include <linux/moduleparam.h>
 #include <linux/types.h>
 #include <crypto/aes.h>
 #include <crypto/des.h>
@@ -20,6 +21,13 @@
 
 #include "cipher.h"
 
+static unsigned int aes_sw_max_len = CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN;
+module_param(aes_sw_max_len, uint, 0644);
+MODULE_PARM_DESC(aes_sw_max_len,
+		 "Only use hardware for AES requests larger than this "
+		 "[0=always use hardware; anything <16 breaks AES-GCM; default="
+		 __stringify(CONFIG_CRYPTO_DEV_QCE_SOFT_THRESHOLD)"]");
+
 static LIST_HEAD(skcipher_algs);
 
 static void qce_skcipher_done(void *data)
@@ -170,15 +178,7 @@ static int qce_skcipher_setkey(struct cr
 	if (!key || !keylen)
 		return -EINVAL;
 
-	if (IS_AES(flags)) {
-		switch (IS_XTS(flags) ? keylen >> 1 : keylen) {
-		case AES_KEYSIZE_128:
-		case AES_KEYSIZE_256:
-			break;
-		default:
-			goto fallback;
-		}
-	} else if (IS_DES(flags)) {
+	if (IS_DES(flags)) {
 		u32 tmp[DES_EXPKEY_WORDS];
 
 		ret = des_ekey(tmp, key);
@@ -189,8 +189,8 @@ static int qce_skcipher_setkey(struct cr
 
 	ctx->enc_keylen = keylen;
 	memcpy(ctx->enc_key, key, keylen);
-	return 0;
-fallback:
+	if (!IS_AES(flags))
+		return 0;
 	ret = crypto_skcipher_setkey(ctx->fallback, key, keylen);
 	if (!ret)
 		ctx->enc_keylen = keylen;
@@ -213,8 +213,9 @@ static int qce_skcipher_crypt(struct skc
 	rctx->flags |= encrypt ? QCE_ENCRYPT : QCE_DECRYPT;
 	keylen = IS_XTS(rctx->flags) ? ctx->enc_keylen >> 1 : ctx->enc_keylen;
 
-	if (IS_AES(rctx->flags) && keylen != AES_KEYSIZE_128 &&
-	    keylen != AES_KEYSIZE_256) {
+	if (IS_AES(rctx->flags) &&
+	    ((keylen != AES_KEYSIZE_128 && keylen != AES_KEYSIZE_256) ||
+	     req->cryptlen <= aes_sw_max_len)) {
 		SKCIPHER_REQUEST_ON_STACK(subreq, ctx->fallback);
 
 		skcipher_request_set_tfm(subreq, ctx->fallback);