Openwrt

Openwrt build for Asrock G10 Router

Go to file

Luka Perkov 69d323f231 mvebu: backport mainline patches from kernel 3.11 This is a backport of the patches accepted to the Linux mainline related to mvebu SoC (Armada XP and Armada 370) between Linux v3.10, and Linux v3.11. This work mainly covers: * Enabling USB storage, and PCI to mvebu_defconfig. * Add support for NOR flash. * Some PCI device tree related updates, and bus parsing. * Adding Armada XP & 370 PCI driver, and update some clock gating specifics. * Introduce Marvell EBU Device Bus driver. * Enaling USB in the armada.dts. Enabling, and updating the mvebu-mbus. * Some SATA and Ethernet related fixes. Signed-off-by: Seif Mazareeb <seif.mazareeb@gmail.com> CC: Luka Perkov <luka@openwrt.org> SVN-Revision: 39564		2014-02-11 02:07:38 +00:00
config	config: lxc: enable KERNEL_POSIX_MQUEUE	2014-01-24 13:49:39 +00:00
docs
include	fix logic error on fpu cflags selection	2014-02-09 13:46:16 +00:00
package	kernel: fix kmod-usb-phy-nop	2014-02-10 20:30:24 +00:00
scripts	scripts/kconfig.pl: Indicate which file we couldn't open	2014-01-19 17:27:04 +00:00
target	mvebu: backport mainline patches from kernel 3.11	2014-02-11 02:07:38 +00:00
toolchain	upgrade Linaro GCC 4.8 to 2014.01	2014-02-06 10:28:45 +00:00
tools	quilt: update to 0.61	2014-02-02 23:41:32 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default	feeds: disable the x-wrt feed, it is unmaintained	2014-02-03 14:29:04 +00:00
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org