EljakimHerrewijnen/Openwrt
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
6985a26e59
Openwrt/target/linux/bcm63xx/image/Makefile
Petr Štetiar a14f5bb4bd treewide: use wpad-basic-wolfssl as default 
In order to support SAE/WPA3-Personal in default images. Replace almost
all occurencies of wpad-basic and wpad-mini with wpad-basic-wolfssl for
consistency. Keep out ar71xx from the list as it won't be in the next
release and would only make backports harder.

Build-tested (build-bot settings):
ath79: generic, ramips: mt7620/mt76x8/rt305x, lantiq: xrx200/xway,
sunxi: a53

Signed-off-by: Petr Štetiar <ynezz@true.cz>
[rebase, extend commit message]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-20 14:19:39 +02:00

330 lines
9.5 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2015 OpenWrt.org
# Copyright (C) 2016 LEDE project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
KERNEL_LOADADDR = 0x80010000 # RAM start + 64K
LOADER_ENTRY = 0x80a00000 # RAM start + 10M, for relocate
RAMSIZE = 0x02000000 # 32MB
LZMA_TEXT_START = 0x81800000 # 32MB - 8MB
RELOCATE_MAKEOPTS= \
CACHELINE_SIZE=16 \
KERNEL_ADDR=$(KERNEL_LOADADDR) \
CROSS_COMPILE=$(TARGET_CROSS) \
LZMA_TEXT_START=$(LOADER_ENTRY)
define Build/Compile
rm -rf $(KDIR)/relocate
$(CP) ../../generic/image/relocate $(KDIR)
$(MAKE) -C $(KDIR)/relocate $(RELOCATE_MAKEOPTS)
endef
### Kernel scripts ###
define Build/hcs-initramfs
$(STAGING_DIR_HOST)/bin/hcsmakeimage --magic_bytes=$(HCS_MAGIC_BYTES) \
--rev_maj=$(HCS_REV_MAJ) --rev_min=$(HCS_REV_MIN) --input_file=$@ \
--output_file=$@.hcs --ldaddress=$(KERNEL_LOADADDR)
mv $@.hcs $@
endef
define Build/loader-lzma
rm -rf $@.src
$(MAKE) -C lzma-loader \
KDIR=$(KDIR) \
LOADER_ADDR=$(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \
KERNEL_ADDR=$(KERNEL_LOADADDR) \
RAMSIZE=$(RAMSIZE) \
LZMA_TEXT_START=$(LZMA_TEXT_START) \
CHIP_ID=$(CHIP_ID) \
PKG_BUILD_DIR="$@.src" \
TARGET_DIR="$(dir $@)" \
LOADER_DATA="$@" \
LOADER_NAME="$(notdir $@)" \
compile loader.$(1)
mv "$@.$(1)" "$@"
rm -rf $@.src
endef
define Build/lzma-cfe
# CFE is a LZMA nazi! It took me hours to find out the parameters!
# Also I think lzma has a bug cause it generates different output depending on
# if you use stdin / stdout or not. Use files instead of stdio here, cause
# otherwise CFE will complain and not boot the image.
$(call Build/lzma-no-dict,-d22 -fb64 -a1)
# Strip out the length, CFE doesn't like this
dd if=$@ of=$@.new bs=5 count=1
dd if=$@ of=$@.new ibs=13 obs=5 skip=1 seek=1 conv=notrunc
mv $@.new $@
endef
define Build/relocate-kernel
# CFE only allows ~4 MiB for the uncompressed kernels, but uncompressed
# kernel might get larger than that, so let CFE unpack and load at a
# higher address and make the kernel relocate itself to the expected
# location.
( \
dd if=$(KDIR)/relocate/loader.bin bs=32 conv=sync && \
perl -e '@s = stat("$@"); print pack("N", @s[7])' && \
cat $@ \
) > $@.relocate
mv $@.relocate $@
endef
### Image scripts ###
define rootfspad/jffs2-128k
--align-rootfs
endef
define rootfspad/jffs2-64k
--align-rootfs
endef
define rootfspad/squashfs
endef
define Image/LimitName16
$(shell expr substr "$(1)" 1 16)
endef
define Image/FileSystemStrip
$(firstword $(subst +,$(space),$(subst root.,,$(notdir $(1)))))
endef
define Build/cfe-bin
$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CHIP_ID) \
--entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
--info1 "$(call Image/LimitName16,$(DEVICE_NAME))" \
--info2 "$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))" \
$(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
$(CFE_EXTRAS) $(1)
endef
define Build/cfe-jffs2
$(STAGING_DIR_HOST)/bin/mkfs.jffs2 \
--big-endian \
--pad \
--no-cleanmarkers \
--eraseblock=$(patsubst %k,%KiB,$(BLOCKSIZE)) \
--root=$(1) \
--output=$@ \
--compression-mode=none
$(call Build/pad-to,$(BLOCKSIZE))
endef
define Build/cfe-jffs2-cferam
mv $@ $@.kernel
rm -rf $@-cferam
mkdir -p $@-cferam
# CFE ROM checks JFFS2 dirent version of cferam.
# If version is not > 0 it will ignore the fs entry.
# JFFS2 sets version 0 to the first fs entry and increments
# it on the following ones, so let's create a dummy file that
# will have version 0 and let cferam be the second (version 1).
touch $@-cferam/1-openwrt
# Add cferam as the last file in the JFFS2 partition
cp $(KDIR)/bcm63xx-cfe/$(CFE_RAM_FILE) $@-cferam/$(CFE_RAM_JFFS2_NAME)
# The JFFS2 partition creation should result in the following
# layout:
# 1) 1-openwrt (version 0, ino 2)
# 2) cferam.000 (version 1, ino 3)
$(call Build/cfe-jffs2,$@-cferam)
# Some devices need padding between CFE RAM and kernel
$(if $(CFE_RAM_JFFS2_PAD),$(call Build/pad-to,$(CFE_RAM_JFFS2_PAD)))
# Add CFE partition tag
$(if $(CFE_PART_ID),$(call Build/cfe-part-tag))
# Append kernel
dd if=$@.kernel >> $@
rm -f $@.kernel
endef
define Build/cfe-jffs2-kernel
rm -rf $@-kernel
mkdir -p $@-kernel
# CFE RAM checks JFFS2 dirent version of vmlinux.
# If version is not > 0 it will ignore the fs entry.
# JFFS2 sets version 0 to the first fs entry and increments
# it on the following ones, so let's create a dummy file that
# will have version 0 and let cferam be the second (version 1).
touch $@-kernel/1-openwrt
# vmlinux is located on a different JFFS2 partition, but CFE RAM
# ignores it, so let's create another dummy file that will match
# the JFFS2 ino of cferam entry on the first JFFS2 partition.
# CFE RAM won't be able to find vmlinux if cferam has the same
# ino as vmlinux.
touch $@-kernel/2-openwrt
# Add vmlinux as the last file in the JFFS2 partition
$(TOPDIR)/scripts/cfe-bin-header.py \
--input-file $@ \
--output-file $@-kernel/vmlinux.lz \
--load-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY)) \
--entry-addr $(if $(DEVICE_LOADADDR),$(DEVICE_LOADADDR),$(LOADER_ENTRY))
# The JFFS2 partition creation should result in the following
# layout:
# 1) 1-openwrt (version 0, ino 2)
# 2) 2-openwrt (version 1, ino 3)
# 3) vmlinux.lz (version 2, ino 4)
$(call Build/cfe-jffs2,$@-kernel)
endef
define Build/cfe-part-tag
mv $@ $@.part
$(TOPDIR)/scripts/cfe-partition-tag.py \
--input-file $@.part \
--output-file $@ \
--flags $(CFE_PART_FLAGS) \
--id $(CFE_PART_ID) \
--name $(VERSION_CODE) \
--version $(DEVICE_NAME)
$(call Build/pad-to,$(BLOCKSIZE))
dd if=$@.part >> $@
endef
define Build/cfe-sercomm-part
$(TOPDIR)/scripts/sercomm-partition-tag.py \
--input-file $@ \
--output-file $@.kernel_rootfs \
--part-name kernel_rootfs \
--part-version OpenWrt \
--rootfs-version $(SERCOMM_VERSION)
rm -rf $@-rootfs_lib
mkdir -p $@-rootfs_lib
echo $(SERCOMM_VERSION) > $@-rootfs_lib/lib_ver
$(call Build/cfe-jffs2,$@-rootfs_lib)
$(call Build/pad-to,$(BLOCKSIZE))
$(TOPDIR)/scripts/sercomm-partition-tag.py \
--input-file $@ \
--output-file $@.rootfs_lib \
--part-name rootfs_lib \
--part-version $(SERCOMM_VERSION)
mv $@.kernel_rootfs $@
dd if=$@.rootfs_lib >> $@
endef
define Build/cfe-sercomm-load
$(TOPDIR)/scripts/sercomm-payload.py \
--input-file $@ \
--output-file $@.new \
--pid "$(SERCOMM_PID)"
mv $@.new $@
endef
define Build/cfe-sercomm-crypto
$(TOPDIR)/scripts/sercomm-crypto.py \
--input-file $@ \
--key-file $@.key \
--output-file $@.ser \
--version OpenWrt
$(STAGING_DIR_HOST)/bin/openssl enc -md md5 -aes-256-cbc \
-in $@ -out $@.enc \
-K `cat $@.key` \
-iv 00000000000000000000000000000000
dd if=$@.enc >> $@.ser
mv $@.ser $@
rm -f $@.enc $@.key
endef
define Build/cfe-old-bin
$(TOPDIR)/scripts/brcmImage.pl -t -p \
-o $@ -b $(CFE_BOARD_ID) -c $(CHIP_ID) \
-e $(LOADER_ENTRY) -a $(LOADER_ENTRY) \
-k $(IMAGE_KERNEL) -r $(IMAGE_ROOTFS) \
$(CFE_EXTRAS)
endef
define Build/cfe-spw303v-bin
$(STAGING_DIR_HOST)/bin/imagetag -i $(IMAGE_KERNEL) -f $(IMAGE_ROOTFS) \
--output $@ --boardid $(CFE_BOARD_ID) --chipid $(CHIP_ID) \
--entry $(LOADER_ENTRY) --load-addr $(LOADER_ENTRY) \
$(call rootfspad/$(call Image/FileSystemStrip,$(IMAGE_ROOTFS))) \
$(CFE_EXTRAS) $(1)
endef
define Build/cfe-wfi-tag
$(TOPDIR)/scripts/cfe-wfi-tag.py \
--input-file $@ \
--output-file $@.new \
--version $(if $(1),$(1),$(CFE_WFI_VERSION)) \
--chip-id $(CFE_WFI_CHIP_ID) \
--flash-type $(CFE_WFI_FLASH_TYPE) \
$(if $(CFE_WFI_FLAGS),--flags $(CFE_WFI_FLAGS))
mv $@.new $@
endef
define Build/spw303v-bin
$(STAGING_DIR_HOST)/bin/spw303v -i $@ -o $@.spw303v
mv $@.spw303v $@
endef
define Build/zyxel-bin
$(STAGING_DIR_HOST)/bin/zyxbcm -i $@ -o $@.zyxel
mv $@.zyxel $@
endef
define Build/redboot-bin
# Prepare kernel and rootfs
dd if=$(IMAGE_KERNEL) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz bs=65536 conv=sync
dd if=$(IMAGE_ROOTFS) of=$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) bs=64k conv=sync
echo -ne \\xDE\\xAD\\xC0\\xDE >> $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))
# Generate the scripted image
$(TOPDIR)/scripts/redboot-script.pl \
-k $(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz \
-r $(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS)) \
-a $(strip $(LOADER_ENTRY)) -f 0xbe430000 -l 0x7c0000 \
-s 0x1000 -t 20 -o $@.redbootscript
dd if="$@.redbootscript" of="$@.redbootscript.padded" bs=4096 conv=sync
cat \
"$@.redbootscript.padded" \
"$(BIN_DIR)/$(REDBOOT_PREFIX)-vmlinux.gz" \
"$(BIN_DIR)/$(REDBOOT_PREFIX)-$(notdir $(IMAGE_ROOTFS))" \
> "$@"
endef
define Device/Default
PROFILES = Default $$(DEVICE_NAME)
KERNEL_DEPENDS = $$(wildcard ../dts/$$(DEVICE_DTS).dts)
KERNEL_INITRAMFS_SUFFIX := .elf
DEVICE_DTS_DIR := ../dts
CHIP_ID :=
SOC = bcm$$(CHIP_ID)
DEVICE_DTS = $$(SOC)-$(subst _,-,$(1))
DEVICE_LOADADDR :=
endef
DEVICE_VARS += CHIP_ID DEVICE_LOADADDR
ATH5K_PACKAGES := kmod-ath5k wpad-basic-wolfssl
ATH9K_PACKAGES := kmod-ath9k wpad-basic-wolfssl
B43_PACKAGES := kmod-b43 wpad-basic-wolfssl
BRCMWL_PACKAGES := kmod-brcm-wl nas wlc
RT28_PACKAGES := kmod-rt2800-pci wpad-basic-wolfssl
RT61_PACKAGES := kmod-rt61-pci wpad-basic-wolfssl
USB1_PACKAGES := kmod-usb-ohci kmod-usb-ledtrig-usbport
USB2_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
include bcm63xx.mk
ifeq ($(SUBTARGET),smp)
include bcm63xx_nand.mk
endif
$(eval $(call BuildImage))
Reference in New Issue View Git Blame Copy Permalink