Openwrt

Openwrt build for Asrock G10 Router

Go to file

Hauke Mehrtens 6910cb4d6f bcm53xx: bgmac: use srab switch driver use the srab switch driver on these SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38200		2013-09-25 21:49:12 +00:00
docs
include	image: generate separate jffs2 images w/o padding	2013-09-25 20:03:20 +00:00
package	package/kernel: add support for industrial-io and AD799x	2013-09-25 18:00:35 +00:00
scripts	feeds: enable cloning of specific git commit	2013-09-25 13:02:55 +00:00
target	bcm53xx: bgmac: use srab switch driver	2013-09-25 21:49:12 +00:00
toolchain	toolchain/gcc: upgrade linaro gcc 4.6 to 4.6-2013.05	2013-09-11 14:29:44 +00:00
tools	tools/padjffs2: allow to specify extra offset	2013-09-25 20:03:19 +00:00
.gitattributes
.gitignore
BSDmakefile
Config.in	build: enable MIPS16 again, but make it depend on !gcc-4.6	2013-09-10 14:40:06 +00:00
feeds.conf.default
LICENSE
Makefile
README
rules.mk

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org