Openwrt build for Asrock G10 Router
Go to file
Michael Yartys 67174adc94 ath10k-ct: update to 2020-01-29
Changes:

ath10k-ct: Support better RSSI measurements.

When used with recent firmware, these changes allow the driver to
query per-chain noise-floor from the radio to better calculate the
per-chain RSSI. The per-chain RSSI is then summed to provide the
'combined RSSI'. This gives better per-chain RSSI as well as combined
RSSI, especially when running with more than 20Mhz bandwidths.

Refresh patches.

Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>  [ipq806x+qca9984,ipq4019+qca9986]
Signed-off-by: Michael Yartys <michael.yartys@protonmail.com>
2020-02-13 17:45:46 +01:00
.github
config buildsystem: Make PIE ASLR option tristate 2020-01-13 15:34:36 +01:00
include kernel: bump 4.19 to 4.19.101 2020-02-04 18:10:13 +01:00
package ath10k-ct: update to 2020-01-29 2020-02-13 17:45:46 +01:00
scripts scripts/arm-magic.sh: switch to /bin/sh 2020-01-02 23:59:20 +01:00
target sunxi: backport increased SATA/AHCI DMA TX/RX FIFOs 2020-02-13 17:45:46 +01:00
toolchain toolchain/gcc: Backport patch to fix unconditional MULTIARCH_DIRNAME 2019-12-23 00:04:18 +01:00
tools firmware-utils: add lxlfw tool for generating Luxul firmwares 2020-02-07 09:31:22 +01:00
.gitattributes
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README
rules.mk

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------

This is the buildsystem for the OpenWrt Linux distribution.

To build your own firmware you need a Linux, BSD or MacOSX system (case
sensitive filesystem required). Cygwin is unsupported because of the lack
of a case sensitive file system.

You need gcc, binutils, bzip2, flex, python3.5+, perl, make, find, grep, diff,
unzip, gawk, getopt, subversion, libz-dev and libc headers installed.

1. Run "./scripts/feeds update -a" to obtain all the latest package definitions
defined in feeds.conf / feeds.conf.default

2. Run "./scripts/feeds install -a" to install symlinks for all obtained
packages into package/feeds/

3. Run "make menuconfig" to select your preferred configuration for the
toolchain, target system & firmware packages.

4. Run "make" to build your firmware. This will download all sources, build
the cross-compile toolchain and then cross-compile the Linux kernel & all
chosen applications for your target system.

Sunshine!
	Your OpenWrt Community
	http://www.openwrt.org