Openwrt/target/linux/ath79/dts/qca9533_tplink_tl-wr842n-v3.dts
Adrian Schmutzler 929becbc2d ath79: fix whitespace issues in DTS files
This is the result of grepping/searching for several common
whitespace issues like double empty lines, leading spaces, etc.

This patch fixes them for the ath79 target.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2019-10-06 21:28:49 +02:00

169 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "qca953x.dtsi"
/ {
compatible = "tplink,tl-wr842n-v3", "qca,qca9533";
model = "TP-Link TL-WR842N v3";
aliases {
led-boot = &power_led;
led-failsafe = &power_led;
led-running = &power_led;
led-upgrade = &power_led;
label-mac-device = &eth1;
};
gpio_leds: leds {
compatible = "gpio-leds";
power_led: power {
label = "tp-link:green:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wifi {
label = "tp-link:green:wlan";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
qss {
label = "tp-link:green:qss";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
wan_green {
label = "tp-link:green:wan";
gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
};
wan_red {
label = "tp-link:red:wan";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
lan1 {
label = "tp-link:green:lan1";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
lan2 {
label = "tp-link:green:lan2";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
};
lan3 {
label = "tp-link:green:lan3";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
lan4 {
label = "tp-link:green:lan4";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
usb {
label = "tp-link:green:usb";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,default-trigger = "usbport";
trigger-sources = <&hub_port>;
};
};
keys {
compatible = "gpio-keys";
reset {
label = "Reset button";
linux,code = <KEY_RESTART>;
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
rfkill {
label = "RFKILL button";
linux,code = <KEY_RFKILL>;
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
debounce-interval = <60>;
};
};
};
&uart {
status = "okay";
};
&usb0 {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
hub_port: port@1 {
reg = <1>;
#trigger-source-cells = <0>;
};
};
&usb_phy {
status = "okay";
};
&spi {
status = "okay";
num-cs = <1>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
uboot: partition@0 {
label = "u-boot";
reg = <0x000000 0x020000>;
read-only;
};
partition@20000 {
compatible = "tplink,firmware";
label = "firmware";
reg = <0x020000 0xfd0000>;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&eth1 {
mtd-mac-address = <&uboot 0x1fc00>;
};
&eth0 {
status = "okay";
phy-handle = <&swphy4>;
mtd-mac-address = <&uboot 0x1fc00>;
mtd-mac-address-increment = <1>;
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&uboot 0x1fc00>;
};