Openwrt build for Asrock G10 Router
Go to file
2007-10-24 13:43:15 +00:00
docs
include We are now at .23.1 2007-10-23 08:13:12 +00:00
package Mark 6tunnel as executable, avoids ": /etc/init.d/rcS: line 8: /etc/rc.d/S466tunnel: Permission denied" 2007-10-24 13:42:15 +00:00
scripts remove the dummy profile that was created on targets that have subtargets 2007-10-21 06:44:06 +00:00
target The watchdog driver is now a platform device driver and reads its gpio line while registering 2007-10-24 13:43:15 +00:00
toolchain Add binutils extra configure options 2007-10-23 06:23:20 +00:00
tools ar7: add eva image generation (thanks Axel Gembe) 2007-10-22 14:20:02 +00:00
.gitignore
BSDmakefile
Config.in add possibility to set default .config values 2007-10-14 02:15:37 +00:00
feeds.conf
LICENSE
Makefile add autorebuild check for menuconfig 2007-10-14 02:28:34 +00:00
README
rules.mk refreshed madwifi patches 2007-10-20 19:13:53 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flash.sh for remotely updating your embedded system
via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org