Openwrt/tools
Richard Fröhning 009e62c92c ramips: add support for TP-Link RE200 v3
TP-Link RE200 v3 is a wireless range extender with Ethernet and 2.4G and 5G
WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2.

Specifications
--------------

- MediaTek MT7628AN (580 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz and 1T1R 5 GHz
- 1x 10/100 Mbps Ethernet
- 8x LED (GPIO-controlled), 2x button

Unverified:
- UART header on PCB (57600 8n1)

There are 2.4G and 5G LEDs in red and green which are controlled
separately.

MAC addresses
-------------

MAC address assignment has been done according to the RE200 v2.

The label MAC address matches the OpenWrt ethernet address.

Installation
------------

Web Interface
-------------

It is possible to upgrade to OpenWrt via the web interface. Simply flash
the -factory.bin from OEM. In contrast to a stock firmware, this will not
overwrite U-Boot.

Recovery
--------

Unfortunately, this devices does not offer a recovery mode or a tftp
installation method. If the web interface upgrade fails, you have to open
your device and attach serial console.

The device has not been opened for adding support. However, it is expected
that the behavior is similar to the RE200 v2. Instructions for serial console
and recovery may be checked out in commit 6d6f36ae78 ("ramips: add support
for TP-Link RE200 v2") or on the device's Wiki page.

Signed-off-by: Richard Fröhning <misanthropos@gmx.de>
[adjust commit title/message, sort support list]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2020-08-03 23:34:34 +02:00
..
autoconf
autoconf-archive
automake
b43-tools
bc
bison
cbootimage
cbootimage-configs
ccache
cmake
coreutils
dosfstools
e2fsprogs
elftosb
expat
findutils
firmware-utils ramips: add support for TP-Link RE200 v3 2020-08-03 23:34:34 +02:00
flex
flock tools/flock: add PKG_{VERSION,RELEASE} 2020-07-23 11:30:22 +02:00
genext2fs
gengetopt
gmp
include
isl
kernel2minor
libelf
libressl
libtool
lzma
lzma-old
m4
make-ext4fs
missing-macros tools: drop PKG_VERSION for purely local packages 2020-07-23 10:54:33 +02:00
mkimage tools/mkimage: create .itb file with read-access for group,other not just owner. 2020-07-23 14:25:10 -04:00
mklibs
mm-macros
mpc
mpfr
mtd-utils
mtools
padjffs2 tools: drop PKG_VERSION for purely local packages 2020-07-23 10:54:33 +02:00
patch
patch-image tools/patch-image: add PKG_RELEASE 2020-07-23 11:30:04 +02:00
patchelf
pkgconf
qemu
quilt
sdimage
sed
sparse
squashfs
squashfskit4
sstrip tools/sstrip: add PKG_{VERSION,RELEASE} 2020-07-23 11:30:14 +02:00
tar
upslug2
wrt350nv2-builder
xz
zip
zlib
zstd
Makefile