Openwrt

Openwrt build for Asrock G10 Router

Go to file

Jo-Philipp Wich 654f9c879f switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem. SVN-Revision: 30937		2012-03-13 21:15:41 +00:00
docs
include	fix ipt_ttl and ipt_TTL userspace library packaging	2012-03-12 02:07:22 +00:00
package	switch: the hardware must be up while configuring Since the removal of the interface coldplug hack the timing changed in such a way that eth0 is not up during switch setup, leading to an inaccesible device. Bring up the switch interface before configuring it to mitigate the problem.	2012-03-13 21:15:41 +00:00
scripts	kernel: keep more symbols in the kernel modules when doing profiling	2012-03-01 15:13:26 +00:00
target	generic: ar8216: merge multiple if statements in ar8216_hw_apply	2012-03-13 17:33:12 +00:00
toolchain	gcc: now that the gpr save/restore issues are taken care of, remove the -Os/-O2 workaround that dealt with it earlier	2012-03-05 00:51:05 +00:00
tools	tools: add dependency on the seq symlink	2012-03-10 12:59:17 +00:00
.gitignore
BSDmakefile
Config.in
feeds.conf.default
LICENSE
Makefile
README	trying to make README file a bit more helpful	2012-01-21 01:15:24 +00:00
rules.mk	kernel: keep more symbols in the kernel modules when doing profiling	2012-03-01 15:13:26 +00:00

README

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org