14d95026b2
The RB91x boards are using a serial shift register connected to the SPI bus to drive some of the LEDs. Rework the board setup code to register a SPI device for that. This makes it possible to use the 'spi-74x164' driver to control the device. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39703
40 lines
1.4 KiB
Diff
40 lines
1.4 KiB
Diff
--- a/arch/mips/ath79/machtypes.h
|
|
+++ b/arch/mips/ath79/machtypes.h
|
|
@@ -75,6 +75,7 @@ enum ath79_mach_type {
|
|
ATH79_MACH_RB_450, /* MikroTik RouterBOARD 450 */
|
|
ATH79_MACH_RB_493, /* Mikrotik RouterBOARD 493/493AH */
|
|
ATH79_MACH_RB_493G, /* Mikrotik RouterBOARD 493G */
|
|
+ ATH79_MACH_RB_711GR100, /* Mikrotik RouterBOARD 911/912 boards */
|
|
ATH79_MACH_RB_750, /* MikroTik RouterBOARD 750 */
|
|
ATH79_MACH_RB_750G_R3, /* MikroTik RouterBOARD 750GL */
|
|
ATH79_MACH_RB_751, /* MikroTik RouterBOARD 751 */
|
|
--- a/arch/mips/ath79/Kconfig
|
|
+++ b/arch/mips/ath79/Kconfig
|
|
@@ -391,6 +391,16 @@ config ATH79_MACH_RB750
|
|
select ATH79_ROUTERBOOT
|
|
select RLE_DECOMPRESS
|
|
|
|
+config ATH79_MACH_RB91X
|
|
+ bool "MikroTik RouterBOARD 91X support"
|
|
+ select SOC_AR934X
|
|
+ select ATH79_DEV_ETH
|
|
+ select ATH79_DEV_SPI
|
|
+ select ATH79_DEV_WMAC
|
|
+ select ATH79_DEV_USB
|
|
+ select ATH79_ROUTERBOOT
|
|
+ select RLE_DECOMPRESS
|
|
+
|
|
config ATH79_MACH_RB95X
|
|
bool "MikroTik RouterBOARD 95X support"
|
|
select SOC_AR934X
|
|
--- a/arch/mips/ath79/Makefile
|
|
+++ b/arch/mips/ath79/Makefile
|
|
@@ -78,6 +78,7 @@ obj-$(CONFIG_ATH79_MACH_PB44) += mach-p
|
|
obj-$(CONFIG_ATH79_MACH_PB92) += mach-pb92.o
|
|
obj-$(CONFIG_ATH79_MACH_RB4XX) += mach-rb4xx.o
|
|
obj-$(CONFIG_ATH79_MACH_RB750) += mach-rb750.o
|
|
+obj-$(CONFIG_ATH79_MACH_RB91X) += mach-rb91x.o
|
|
obj-$(CONFIG_ATH79_MACH_RB95X) += mach-rb95x.o
|
|
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
|
|
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
|