Openwrt/target/linux/lantiq/patches-3.3/0022-owrt-dm9000-polling.patch
John Crispin 060b161ca6 cleanup patches
SVN-Revision: 32953
2012-08-03 08:53:02 +00:00

132 lines
3.9 KiB
Diff

From 3c7089199784e3d53054869108cfa5666b42e7ea Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 3 Aug 2012 10:28:51 +0200
Subject: [PATCH 22/25] owrt dm9000 polling
---
drivers/net/ethernet/davicom/dm9000.c | 50 +++++++++++++++++++++++++++-----
1 files changed, 42 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/davicom/dm9000.c b/drivers/net/ethernet/davicom/dm9000.c
index f801754..258a0c3 100644
--- a/drivers/net/ethernet/davicom/dm9000.c
+++ b/drivers/net/ethernet/davicom/dm9000.c
@@ -19,6 +19,7 @@
* Sascha Hauer <s.hauer@pengutronix.de>
*/
+#define DEBUG
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/netdevice.h>
@@ -132,6 +133,8 @@ typedef struct board_info {
struct delayed_work phy_poll;
struct net_device *ndev;
+ struct delayed_work irq_poll; /* for use in irq polling mode */
+
spinlock_t lock;
struct mii_if_info mii;
@@ -845,6 +848,8 @@ static void dm9000_timeout(struct net_device *dev)
netif_stop_queue(dev);
dm9000_reset(db);
dm9000_init_dm9000(dev);
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
/* We can accept TX packets again */
dev->trans_start = jiffies; /* prevent tx timeout */
netif_wake_queue(dev);
@@ -916,6 +921,12 @@ dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev)
/* free this SKB */
dev_kfree_skb(skb);
+ /* directly poll afterwards */
+ if (dev->irq == -1) {
+ cancel_delayed_work(&db->irq_poll);
+ schedule_delayed_work(&db->irq_poll, 1);
+ }
+
return NETDEV_TX_OK;
}
@@ -1157,6 +1168,18 @@ static void dm9000_poll_controller(struct net_device *dev)
}
#endif
+static void dm9000_poll_irq(struct work_struct *w)
+{
+ struct delayed_work *dw = to_delayed_work(w);
+ board_info_t *db = container_of(dw, board_info_t, irq_poll);
+ struct net_device *ndev = db->ndev;
+
+ dm9000_interrupt(0, ndev);
+
+ if (netif_running(ndev))
+ schedule_delayed_work(&db->irq_poll, HZ /100);
+}
+
/*
* Open the interface.
* The interface is opened whenever "ifconfig" actives it.
@@ -1170,14 +1193,15 @@ dm9000_open(struct net_device *dev)
if (netif_msg_ifup(db))
dev_dbg(db->dev, "enabling %s\n", dev->name);
- /* If there is no IRQ type specified, default to something that
- * may work, and tell the user that this is a problem */
+ if (dev->irq != -1) {
+ /* If there is no IRQ type specified, default to something that
+ * may work, and tell the user that this is a problem */
- if (irqflags == IRQF_TRIGGER_NONE)
- dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
-
- irqflags |= IRQF_SHARED;
+ if (irqflags == IRQF_TRIGGER_NONE)
+ dev_warn(db->dev, "WARNING: no IRQ resource flags set.\n");
+ irqflags |= IRQF_SHARED;
+ }
/* GPIO0 on pre-activate PHY, Reg 1F is not set by reset */
iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */
mdelay(1); /* delay needs by DM9000B */
@@ -1186,8 +1210,14 @@ dm9000_open(struct net_device *dev)
dm9000_reset(db);
dm9000_init_dm9000(dev);
- if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
- return -EAGAIN;
+ /* testing: init a second time */
+ dm9000_reset(db);
+ dm9000_init_dm9000(dev);
+
+ if (dev->irq != -1) {
+ if (request_irq(dev->irq, dm9000_interrupt, irqflags, dev->name, dev))
+ return -EAGAIN;
+ }
/* Init driver variable */
db->dbug_cnt = 0;
@@ -1195,6 +1225,9 @@ dm9000_open(struct net_device *dev)
mii_check_media(&db->mii, netif_msg_link(db), 1);
netif_start_queue(dev);
+ if (dev->irq == -1)
+ schedule_delayed_work(&db->irq_poll, HZ / 100);
+
dm9000_schedule_poll(db);
return 0;
@@ -1392,6 +1425,7 @@ dm9000_probe(struct platform_device *pdev)
mutex_init(&db->addr_lock);
INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
+ INIT_DELAYED_WORK(&db->irq_poll, dm9000_poll_irq);
db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
--
1.7.9.1