4045 lines
111 KiB
Diff
4045 lines
111 KiB
Diff
Index: linux-2.6.23.17/arch/arm/kernel/setup.c
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/arch/arm/kernel/setup.c
|
|
+++ linux-2.6.23.17/arch/arm/kernel/setup.c
|
|
@@ -62,6 +62,7 @@ extern int root_mountflags;
|
|
extern void _stext, _text, _etext, __data_start, _edata, _end;
|
|
|
|
unsigned int processor_id;
|
|
+EXPORT_SYMBOL(processor_id);
|
|
unsigned int __machine_arch_type;
|
|
EXPORT_SYMBOL(__machine_arch_type);
|
|
|
|
Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Kconfig
|
|
+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Kconfig
|
|
@@ -246,6 +246,20 @@ config IXP4XX_INDIRECT_PCI
|
|
need to use the indirect method instead. If you don't know
|
|
what you need, leave this option unselected.
|
|
|
|
+config IXP4XX_QMGR
|
|
+ tristate "IXP4xx Queue Manager support"
|
|
+ help
|
|
+ This driver supports IXP4xx built-in hardware queue manager
|
|
+ and is automatically selected by Ethernet and HSS drivers.
|
|
+
|
|
+config IXP4XX_NPE
|
|
+ tristate "IXP4xx Network Processor Engine support"
|
|
+ select HOTPLUG
|
|
+ select FW_LOADER
|
|
+ help
|
|
+ This driver supports IXP4xx built-in network coprocessors
|
|
+ and is automatically selected by Ethernet and HSS drivers.
|
|
+
|
|
endmenu
|
|
|
|
endif
|
|
Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/Makefile
|
|
+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/Makefile
|
|
@@ -44,3 +44,5 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
|
|
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
|
|
|
|
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
|
|
+obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
|
|
+obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
|
|
Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/arch/arm/mach-ixp4xx/ixdp425-setup.c
|
|
+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixdp425-setup.c
|
|
@@ -177,6 +177,31 @@ static struct platform_device ixdp425_ua
|
|
.resource = ixdp425_uart_resources
|
|
};
|
|
|
|
+/* Built-in 10/100 Ethernet MAC interfaces */
|
|
+static struct eth_plat_info ixdp425_plat_eth[] = {
|
|
+ {
|
|
+ .phy = 0,
|
|
+ .rxq = 3,
|
|
+ .txreadyq = 20,
|
|
+ }, {
|
|
+ .phy = 1,
|
|
+ .rxq = 4,
|
|
+ .txreadyq = 21,
|
|
+ }
|
|
+};
|
|
+
|
|
+static struct platform_device ixdp425_eth[] = {
|
|
+ {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEB,
|
|
+ .dev.platform_data = ixdp425_plat_eth,
|
|
+ }, {
|
|
+ .name = "ixp4xx_eth",
|
|
+ .id = IXP4XX_ETH_NPEC,
|
|
+ .dev.platform_data = ixdp425_plat_eth + 1,
|
|
+ }
|
|
+};
|
|
+
|
|
static struct platform_device *ixdp425_devices[] __initdata = {
|
|
&ixdp425_i2c_gpio,
|
|
&ixdp425_flash,
|
|
@@ -184,7 +209,9 @@ static struct platform_device *ixdp425_d
|
|
defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
|
|
&ixdp425_flash_nand,
|
|
#endif
|
|
- &ixdp425_uart
|
|
+ &ixdp425_uart,
|
|
+ &ixdp425_eth[0],
|
|
+ &ixdp425_eth[1],
|
|
};
|
|
|
|
static void __init ixdp425_init(void)
|
|
Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_npe.c
|
|
@@ -0,0 +1,741 @@
|
|
+/*
|
|
+ * Intel IXP4xx Network Processor Engine driver for Linux
|
|
+ *
|
|
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of version 2 of the GNU General Public License
|
|
+ * as published by the Free Software Foundation.
|
|
+ *
|
|
+ * The code is based on publicly available information:
|
|
+ * - Intel IXP4xx Developer's Manual and other e-papers
|
|
+ * - Intel IXP400 Access Library Software (BSD license)
|
|
+ * - previous works by Christian Hohnstaedt <chohnstaedt@innominate.com>
|
|
+ * Thanks, Christian.
|
|
+ */
|
|
+
|
|
+#include <linux/delay.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/firmware.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <linux/slab.h>
|
|
+#include <asm/arch/npe.h>
|
|
+
|
|
+#define DEBUG_MSG 0
|
|
+#define DEBUG_FW 0
|
|
+
|
|
+#define NPE_COUNT 3
|
|
+#define MAX_RETRIES 1000 /* microseconds */
|
|
+#define NPE_42X_DATA_SIZE 0x800 /* in dwords */
|
|
+#define NPE_46X_DATA_SIZE 0x1000
|
|
+#define NPE_A_42X_INSTR_SIZE 0x1000
|
|
+#define NPE_B_AND_C_42X_INSTR_SIZE 0x800
|
|
+#define NPE_46X_INSTR_SIZE 0x1000
|
|
+#define REGS_SIZE 0x1000
|
|
+
|
|
+#define NPE_PHYS_REG 32
|
|
+
|
|
+#define FW_MAGIC 0xFEEDF00D
|
|
+#define FW_BLOCK_TYPE_INSTR 0x0
|
|
+#define FW_BLOCK_TYPE_DATA 0x1
|
|
+#define FW_BLOCK_TYPE_EOF 0xF
|
|
+
|
|
+/* NPE exec status (read) and command (write) */
|
|
+#define CMD_NPE_STEP 0x01
|
|
+#define CMD_NPE_START 0x02
|
|
+#define CMD_NPE_STOP 0x03
|
|
+#define CMD_NPE_CLR_PIPE 0x04
|
|
+#define CMD_CLR_PROFILE_CNT 0x0C
|
|
+#define CMD_RD_INS_MEM 0x10 /* instruction memory */
|
|
+#define CMD_WR_INS_MEM 0x11
|
|
+#define CMD_RD_DATA_MEM 0x12 /* data memory */
|
|
+#define CMD_WR_DATA_MEM 0x13
|
|
+#define CMD_RD_ECS_REG 0x14 /* exec access register */
|
|
+#define CMD_WR_ECS_REG 0x15
|
|
+
|
|
+#define STAT_RUN 0x80000000
|
|
+#define STAT_STOP 0x40000000
|
|
+#define STAT_CLEAR 0x20000000
|
|
+#define STAT_ECS_K 0x00800000 /* pipeline clean */
|
|
+
|
|
+#define NPE_STEVT 0x1B
|
|
+#define NPE_STARTPC 0x1C
|
|
+#define NPE_REGMAP 0x1E
|
|
+#define NPE_CINDEX 0x1F
|
|
+
|
|
+#define INSTR_WR_REG_SHORT 0x0000C000
|
|
+#define INSTR_WR_REG_BYTE 0x00004000
|
|
+#define INSTR_RD_FIFO 0x0F888220
|
|
+#define INSTR_RESET_MBOX 0x0FAC8210
|
|
+
|
|
+#define ECS_BG_CTXT_REG_0 0x00 /* Background Executing Context */
|
|
+#define ECS_BG_CTXT_REG_1 0x01 /* Stack level */
|
|
+#define ECS_BG_CTXT_REG_2 0x02
|
|
+#define ECS_PRI_1_CTXT_REG_0 0x04 /* Priority 1 Executing Context */
|
|
+#define ECS_PRI_1_CTXT_REG_1 0x05 /* Stack level */
|
|
+#define ECS_PRI_1_CTXT_REG_2 0x06
|
|
+#define ECS_PRI_2_CTXT_REG_0 0x08 /* Priority 2 Executing Context */
|
|
+#define ECS_PRI_2_CTXT_REG_1 0x09 /* Stack level */
|
|
+#define ECS_PRI_2_CTXT_REG_2 0x0A
|
|
+#define ECS_DBG_CTXT_REG_0 0x0C /* Debug Executing Context */
|
|
+#define ECS_DBG_CTXT_REG_1 0x0D /* Stack level */
|
|
+#define ECS_DBG_CTXT_REG_2 0x0E
|
|
+#define ECS_INSTRUCT_REG 0x11 /* NPE Instruction Register */
|
|
+
|
|
+#define ECS_REG_0_ACTIVE 0x80000000 /* all levels */
|
|
+#define ECS_REG_0_NEXTPC_MASK 0x1FFF0000 /* BG/PRI1/PRI2 levels */
|
|
+#define ECS_REG_0_LDUR_BITS 8
|
|
+#define ECS_REG_0_LDUR_MASK 0x00000700 /* all levels */
|
|
+#define ECS_REG_1_CCTXT_BITS 16
|
|
+#define ECS_REG_1_CCTXT_MASK 0x000F0000 /* all levels */
|
|
+#define ECS_REG_1_SELCTXT_BITS 0
|
|
+#define ECS_REG_1_SELCTXT_MASK 0x0000000F /* all levels */
|
|
+#define ECS_DBG_REG_2_IF 0x00100000 /* debug level */
|
|
+#define ECS_DBG_REG_2_IE 0x00080000 /* debug level */
|
|
+
|
|
+/* NPE watchpoint_fifo register bit */
|
|
+#define WFIFO_VALID 0x80000000
|
|
+
|
|
+/* NPE messaging_status register bit definitions */
|
|
+#define MSGSTAT_OFNE 0x00010000 /* OutFifoNotEmpty */
|
|
+#define MSGSTAT_IFNF 0x00020000 /* InFifoNotFull */
|
|
+#define MSGSTAT_OFNF 0x00040000 /* OutFifoNotFull */
|
|
+#define MSGSTAT_IFNE 0x00080000 /* InFifoNotEmpty */
|
|
+#define MSGSTAT_MBINT 0x00100000 /* Mailbox interrupt */
|
|
+#define MSGSTAT_IFINT 0x00200000 /* InFifo interrupt */
|
|
+#define MSGSTAT_OFINT 0x00400000 /* OutFifo interrupt */
|
|
+#define MSGSTAT_WFINT 0x00800000 /* WatchFifo interrupt */
|
|
+
|
|
+/* NPE messaging_control register bit definitions */
|
|
+#define MSGCTL_OUT_FIFO 0x00010000 /* enable output FIFO */
|
|
+#define MSGCTL_IN_FIFO 0x00020000 /* enable input FIFO */
|
|
+#define MSGCTL_OUT_FIFO_WRITE 0x01000000 /* enable FIFO + WRITE */
|
|
+#define MSGCTL_IN_FIFO_WRITE 0x02000000
|
|
+
|
|
+/* NPE mailbox_status value for reset */
|
|
+#define RESET_MBOX_STAT 0x0000F0F0
|
|
+
|
|
+const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" };
|
|
+
|
|
+#define print_npe(pri, npe, fmt, ...) \
|
|
+ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
|
|
+
|
|
+#if DEBUG_MSG
|
|
+#define debug_msg(npe, fmt, ...) \
|
|
+ print_npe(KERN_DEBUG, npe, fmt, ## __VA_ARGS__)
|
|
+#else
|
|
+#define debug_msg(npe, fmt, ...)
|
|
+#endif
|
|
+
|
|
+static struct {
|
|
+ u32 reg, val;
|
|
+} ecs_reset[] = {
|
|
+ { ECS_BG_CTXT_REG_0, 0xA0000000 },
|
|
+ { ECS_BG_CTXT_REG_1, 0x01000000 },
|
|
+ { ECS_BG_CTXT_REG_2, 0x00008000 },
|
|
+ { ECS_PRI_1_CTXT_REG_0, 0x20000080 },
|
|
+ { ECS_PRI_1_CTXT_REG_1, 0x01000000 },
|
|
+ { ECS_PRI_1_CTXT_REG_2, 0x00008000 },
|
|
+ { ECS_PRI_2_CTXT_REG_0, 0x20000080 },
|
|
+ { ECS_PRI_2_CTXT_REG_1, 0x01000000 },
|
|
+ { ECS_PRI_2_CTXT_REG_2, 0x00008000 },
|
|
+ { ECS_DBG_CTXT_REG_0, 0x20000000 },
|
|
+ { ECS_DBG_CTXT_REG_1, 0x00000000 },
|
|
+ { ECS_DBG_CTXT_REG_2, 0x001E0000 },
|
|
+ { ECS_INSTRUCT_REG, 0x1003C00F },
|
|
+};
|
|
+
|
|
+static struct npe npe_tab[NPE_COUNT] = {
|
|
+ {
|
|
+ .id = 0,
|
|
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEA_BASE_VIRT,
|
|
+ .regs_phys = IXP4XX_NPEA_BASE_PHYS,
|
|
+ }, {
|
|
+ .id = 1,
|
|
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEB_BASE_VIRT,
|
|
+ .regs_phys = IXP4XX_NPEB_BASE_PHYS,
|
|
+ }, {
|
|
+ .id = 2,
|
|
+ .regs = (struct npe_regs __iomem *)IXP4XX_NPEC_BASE_VIRT,
|
|
+ .regs_phys = IXP4XX_NPEC_BASE_PHYS,
|
|
+ }
|
|
+};
|
|
+
|
|
+int npe_running(struct npe *npe)
|
|
+{
|
|
+ return (__raw_readl(&npe->regs->exec_status_cmd) & STAT_RUN) != 0;
|
|
+}
|
|
+
|
|
+static void npe_cmd_write(struct npe *npe, u32 addr, int cmd, u32 data)
|
|
+{
|
|
+ __raw_writel(data, &npe->regs->exec_data);
|
|
+ __raw_writel(addr, &npe->regs->exec_addr);
|
|
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
|
|
+}
|
|
+
|
|
+static u32 npe_cmd_read(struct npe *npe, u32 addr, int cmd)
|
|
+{
|
|
+ __raw_writel(addr, &npe->regs->exec_addr);
|
|
+ __raw_writel(cmd, &npe->regs->exec_status_cmd);
|
|
+ /* Iintroduce extra read cycles after issuing read command to NPE
|
|
+ so that we read the register after the NPE has updated it.
|
|
+ This is to overcome race condition between XScale and NPE */
|
|
+ __raw_readl(&npe->regs->exec_data);
|
|
+ __raw_readl(&npe->regs->exec_data);
|
|
+ return __raw_readl(&npe->regs->exec_data);
|
|
+}
|
|
+
|
|
+static void npe_clear_active(struct npe *npe, u32 reg)
|
|
+{
|
|
+ u32 val = npe_cmd_read(npe, reg, CMD_RD_ECS_REG);
|
|
+ npe_cmd_write(npe, reg, CMD_WR_ECS_REG, val & ~ECS_REG_0_ACTIVE);
|
|
+}
|
|
+
|
|
+static void npe_start(struct npe *npe)
|
|
+{
|
|
+ /* ensure only Background Context Stack Level is active */
|
|
+ npe_clear_active(npe, ECS_PRI_1_CTXT_REG_0);
|
|
+ npe_clear_active(npe, ECS_PRI_2_CTXT_REG_0);
|
|
+ npe_clear_active(npe, ECS_DBG_CTXT_REG_0);
|
|
+
|
|
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
|
|
+ __raw_writel(CMD_NPE_START, &npe->regs->exec_status_cmd);
|
|
+}
|
|
+
|
|
+static void npe_stop(struct npe *npe)
|
|
+{
|
|
+ __raw_writel(CMD_NPE_STOP, &npe->regs->exec_status_cmd);
|
|
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd); /*FIXME?*/
|
|
+}
|
|
+
|
|
+static int __must_check npe_debug_instr(struct npe *npe, u32 instr, u32 ctx,
|
|
+ u32 ldur)
|
|
+{
|
|
+ u32 wc;
|
|
+ int i;
|
|
+
|
|
+ /* set the Active bit, and the LDUR, in the debug level */
|
|
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG,
|
|
+ ECS_REG_0_ACTIVE | (ldur << ECS_REG_0_LDUR_BITS));
|
|
+
|
|
+ /* set CCTXT at ECS DEBUG L3 to specify in which context to execute
|
|
+ the instruction, and set SELCTXT at ECS DEBUG Level to specify
|
|
+ which context store to access.
|
|
+ Debug ECS Level Reg 1 has form 0x000n000n, where n = context number
|
|
+ */
|
|
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_1, CMD_WR_ECS_REG,
|
|
+ (ctx << ECS_REG_1_CCTXT_BITS) |
|
|
+ (ctx << ECS_REG_1_SELCTXT_BITS));
|
|
+
|
|
+ /* clear the pipeline */
|
|
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
|
|
+
|
|
+ /* load NPE instruction into the instruction register */
|
|
+ npe_cmd_write(npe, ECS_INSTRUCT_REG, CMD_WR_ECS_REG, instr);
|
|
+
|
|
+ /* we need this value later to wait for completion of NPE execution
|
|
+ step */
|
|
+ wc = __raw_readl(&npe->regs->watch_count);
|
|
+
|
|
+ /* issue a Step One command via the Execution Control register */
|
|
+ __raw_writel(CMD_NPE_STEP, &npe->regs->exec_status_cmd);
|
|
+
|
|
+ /* Watch Count register increments when NPE completes an instruction */
|
|
+ for (i = 0; i < MAX_RETRIES; i++) {
|
|
+ if (wc != __raw_readl(&npe->regs->watch_count))
|
|
+ return 0;
|
|
+ udelay(1);
|
|
+ }
|
|
+
|
|
+ print_npe(KERN_ERR, npe, "reset: npe_debug_instr(): timeout\n");
|
|
+ return -ETIMEDOUT;
|
|
+}
|
|
+
|
|
+static int __must_check npe_logical_reg_write8(struct npe *npe, u32 addr,
|
|
+ u8 val, u32 ctx)
|
|
+{
|
|
+ /* here we build the NPE assembler instruction: mov8 d0, #0 */
|
|
+ u32 instr = INSTR_WR_REG_BYTE | /* OpCode */
|
|
+ addr << 9 | /* base Operand */
|
|
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
|
|
+ (val & ~0x1F) << (18 - 5);/* higher 3 bits to CoProc instr. */
|
|
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
|
|
+}
|
|
+
|
|
+static int __must_check npe_logical_reg_write16(struct npe *npe, u32 addr,
|
|
+ u16 val, u32 ctx)
|
|
+{
|
|
+ /* here we build the NPE assembler instruction: mov16 d0, #0 */
|
|
+ u32 instr = INSTR_WR_REG_SHORT | /* OpCode */
|
|
+ addr << 9 | /* base Operand */
|
|
+ (val & 0x1F) << 4 | /* lower 5 bits to immediate data */
|
|
+ (val & ~0x1F) << (18 - 5);/* higher 11 bits to CoProc instr. */
|
|
+ return npe_debug_instr(npe, instr, ctx, 1); /* execute it */
|
|
+}
|
|
+
|
|
+static int __must_check npe_logical_reg_write32(struct npe *npe, u32 addr,
|
|
+ u32 val, u32 ctx)
|
|
+{
|
|
+ /* write in 16 bit steps first the high and then the low value */
|
|
+ if (npe_logical_reg_write16(npe, addr, val >> 16, ctx))
|
|
+ return -ETIMEDOUT;
|
|
+ return npe_logical_reg_write16(npe, addr + 2, val & 0xFFFF, ctx);
|
|
+}
|
|
+
|
|
+static int npe_reset(struct npe *npe)
|
|
+{
|
|
+ u32 val, ctl, exec_count, ctx_reg2;
|
|
+ int i;
|
|
+
|
|
+ ctl = (__raw_readl(&npe->regs->messaging_control) | 0x3F000000) &
|
|
+ 0x3F3FFFFF;
|
|
+
|
|
+ /* disable parity interrupt */
|
|
+ __raw_writel(ctl & 0x3F00FFFF, &npe->regs->messaging_control);
|
|
+
|
|
+ /* pre exec - debug instruction */
|
|
+ /* turn off the halt bit by clearing Execution Count register. */
|
|
+ exec_count = __raw_readl(&npe->regs->exec_count);
|
|
+ __raw_writel(0, &npe->regs->exec_count);
|
|
+ /* ensure that IF and IE are on (temporarily), so that we don't end up
|
|
+ stepping forever */
|
|
+ ctx_reg2 = npe_cmd_read(npe, ECS_DBG_CTXT_REG_2, CMD_RD_ECS_REG);
|
|
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2 |
|
|
+ ECS_DBG_REG_2_IF | ECS_DBG_REG_2_IE);
|
|
+
|
|
+ /* clear the FIFOs */
|
|
+ while (__raw_readl(&npe->regs->watchpoint_fifo) & WFIFO_VALID)
|
|
+ ;
|
|
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE)
|
|
+ /* read from the outFIFO until empty */
|
|
+ print_npe(KERN_DEBUG, npe, "npe_reset: read FIFO = 0x%X\n",
|
|
+ __raw_readl(&npe->regs->in_out_fifo));
|
|
+
|
|
+ while (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)
|
|
+ /* step execution of the NPE intruction to read inFIFO using
|
|
+ the Debug Executing Context stack */
|
|
+ if (npe_debug_instr(npe, INSTR_RD_FIFO, 0, 0))
|
|
+ return -ETIMEDOUT;
|
|
+
|
|
+ /* reset the mailbox reg from the XScale side */
|
|
+ __raw_writel(RESET_MBOX_STAT, &npe->regs->mailbox_status);
|
|
+ /* from NPE side */
|
|
+ if (npe_debug_instr(npe, INSTR_RESET_MBOX, 0, 0))
|
|
+ return -ETIMEDOUT;
|
|
+
|
|
+ /* Reset the physical registers in the NPE register file */
|
|
+ for (val = 0; val < NPE_PHYS_REG; val++) {
|
|
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, val >> 1, 0))
|
|
+ return -ETIMEDOUT;
|
|
+ /* address is either 0 or 4 */
|
|
+ if (npe_logical_reg_write32(npe, (val & 1) * 4, 0, 0))
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ /* Reset the context store = each context's Context Store registers */
|
|
+
|
|
+ /* Context 0 has no STARTPC. Instead, this value is used to set NextPC
|
|
+ for Background ECS, to set where NPE starts executing code */
|
|
+ val = npe_cmd_read(npe, ECS_BG_CTXT_REG_0, CMD_RD_ECS_REG);
|
|
+ val &= ~ECS_REG_0_NEXTPC_MASK;
|
|
+ val |= (0 /* NextPC */ << 16) & ECS_REG_0_NEXTPC_MASK;
|
|
+ npe_cmd_write(npe, ECS_BG_CTXT_REG_0, CMD_WR_ECS_REG, val);
|
|
+
|
|
+ for (i = 0; i < 16; i++) {
|
|
+ if (i) { /* Context 0 has no STEVT nor STARTPC */
|
|
+ /* STEVT = off, 0x80 */
|
|
+ if (npe_logical_reg_write8(npe, NPE_STEVT, 0x80, i))
|
|
+ return -ETIMEDOUT;
|
|
+ if (npe_logical_reg_write16(npe, NPE_STARTPC, 0, i))
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+ /* REGMAP = d0->p0, d8->p2, d16->p4 */
|
|
+ if (npe_logical_reg_write16(npe, NPE_REGMAP, 0x820, i))
|
|
+ return -ETIMEDOUT;
|
|
+ if (npe_logical_reg_write8(npe, NPE_CINDEX, 0, i))
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ /* post exec */
|
|
+ /* clear active bit in debug level */
|
|
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_0, CMD_WR_ECS_REG, 0);
|
|
+ /* clear the pipeline */
|
|
+ __raw_writel(CMD_NPE_CLR_PIPE, &npe->regs->exec_status_cmd);
|
|
+ /* restore previous values */
|
|
+ __raw_writel(exec_count, &npe->regs->exec_count);
|
|
+ npe_cmd_write(npe, ECS_DBG_CTXT_REG_2, CMD_WR_ECS_REG, ctx_reg2);
|
|
+
|
|
+ /* write reset values to Execution Context Stack registers */
|
|
+ for (val = 0; val < ARRAY_SIZE(ecs_reset); val++)
|
|
+ npe_cmd_write(npe, ecs_reset[val].reg, CMD_WR_ECS_REG,
|
|
+ ecs_reset[val].val);
|
|
+
|
|
+ /* clear the profile counter */
|
|
+ __raw_writel(CMD_CLR_PROFILE_CNT, &npe->regs->exec_status_cmd);
|
|
+
|
|
+ __raw_writel(0, &npe->regs->exec_count);
|
|
+ __raw_writel(0, &npe->regs->action_points[0]);
|
|
+ __raw_writel(0, &npe->regs->action_points[1]);
|
|
+ __raw_writel(0, &npe->regs->action_points[2]);
|
|
+ __raw_writel(0, &npe->regs->action_points[3]);
|
|
+ __raw_writel(0, &npe->regs->watch_count);
|
|
+
|
|
+ val = ixp4xx_read_feature_bits();
|
|
+ /* reset the NPE */
|
|
+ ixp4xx_write_feature_bits(val &
|
|
+ ~(IXP4XX_FEATURE_RESET_NPEA << npe->id));
|
|
+ for (i = 0; i < MAX_RETRIES; i++) {
|
|
+ if (!(ixp4xx_read_feature_bits() &
|
|
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id)))
|
|
+ break; /* reset completed */
|
|
+ udelay(1);
|
|
+ }
|
|
+ if (i == MAX_RETRIES)
|
|
+ return -ETIMEDOUT;
|
|
+
|
|
+ /* deassert reset */
|
|
+ ixp4xx_write_feature_bits(val |
|
|
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id));
|
|
+ for (i = 0; i < MAX_RETRIES; i++) {
|
|
+ if (ixp4xx_read_feature_bits() &
|
|
+ (IXP4XX_FEATURE_RESET_NPEA << npe->id))
|
|
+ break; /* NPE is back alive */
|
|
+ udelay(1);
|
|
+ }
|
|
+ if (i == MAX_RETRIES)
|
|
+ return -ETIMEDOUT;
|
|
+
|
|
+ npe_stop(npe);
|
|
+
|
|
+ /* restore NPE configuration bus Control Register - parity settings */
|
|
+ __raw_writel(ctl, &npe->regs->messaging_control);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+int npe_send_message(struct npe *npe, const void *msg, const char *what)
|
|
+{
|
|
+ const u32 *send = msg;
|
|
+ int cycles = 0;
|
|
+
|
|
+ debug_msg(npe, "Trying to send message %s [%08X:%08X]\n",
|
|
+ what, send[0], send[1]);
|
|
+
|
|
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE) {
|
|
+ debug_msg(npe, "NPE input FIFO not empty\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ __raw_writel(send[0], &npe->regs->in_out_fifo);
|
|
+
|
|
+ if (!(__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNF)) {
|
|
+ debug_msg(npe, "NPE input FIFO full\n");
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ __raw_writel(send[1], &npe->regs->in_out_fifo);
|
|
+
|
|
+ while ((cycles < MAX_RETRIES) &&
|
|
+ (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_IFNE)) {
|
|
+ udelay(1);
|
|
+ cycles++;
|
|
+ }
|
|
+
|
|
+ if (cycles == MAX_RETRIES) {
|
|
+ debug_msg(npe, "Timeout sending message\n");
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ debug_msg(npe, "Sending a message took %i cycles\n", cycles);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int npe_recv_message(struct npe *npe, void *msg, const char *what)
|
|
+{
|
|
+ u32 *recv = msg;
|
|
+ int cycles = 0, cnt = 0;
|
|
+
|
|
+ debug_msg(npe, "Trying to receive message %s\n", what);
|
|
+
|
|
+ while (cycles < MAX_RETRIES) {
|
|
+ if (__raw_readl(&npe->regs->messaging_status) & MSGSTAT_OFNE) {
|
|
+ recv[cnt++] = __raw_readl(&npe->regs->in_out_fifo);
|
|
+ if (cnt == 2)
|
|
+ break;
|
|
+ } else {
|
|
+ udelay(1);
|
|
+ cycles++;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ switch(cnt) {
|
|
+ case 1:
|
|
+ debug_msg(npe, "Received [%08X]\n", recv[0]);
|
|
+ break;
|
|
+ case 2:
|
|
+ debug_msg(npe, "Received [%08X:%08X]\n", recv[0], recv[1]);
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (cycles == MAX_RETRIES) {
|
|
+ debug_msg(npe, "Timeout waiting for message\n");
|
|
+ return -ETIMEDOUT;
|
|
+ }
|
|
+
|
|
+ debug_msg(npe, "Receiving a message took %i cycles\n", cycles);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what)
|
|
+{
|
|
+ int result;
|
|
+ u32 *send = msg, recv[2];
|
|
+
|
|
+ if ((result = npe_send_message(npe, msg, what)) != 0)
|
|
+ return result;
|
|
+ if ((result = npe_recv_message(npe, recv, what)) != 0)
|
|
+ return result;
|
|
+
|
|
+ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
|
|
+ debug_msg(npe, "Message %s: unexpected message received\n",
|
|
+ what);
|
|
+ return -EIO;
|
|
+ }
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev)
|
|
+{
|
|
+ const struct firmware *fw_entry;
|
|
+
|
|
+ struct dl_block {
|
|
+ u32 type;
|
|
+ u32 offset;
|
|
+ } *blk;
|
|
+
|
|
+ struct dl_image {
|
|
+ u32 magic;
|
|
+ u32 id;
|
|
+ u32 size;
|
|
+ union {
|
|
+ u32 data[0];
|
|
+ struct dl_block blocks[0];
|
|
+ };
|
|
+ } *image;
|
|
+
|
|
+ struct dl_codeblock {
|
|
+ u32 npe_addr;
|
|
+ u32 size;
|
|
+ u32 data[0];
|
|
+ } *cb;
|
|
+
|
|
+ int i, j, err, data_size, instr_size, blocks, table_end;
|
|
+ u32 cmd;
|
|
+
|
|
+ if ((err = request_firmware(&fw_entry, name, dev)) != 0)
|
|
+ return err;
|
|
+
|
|
+ err = -EINVAL;
|
|
+ if (fw_entry->size < sizeof(struct dl_image)) {
|
|
+ print_npe(KERN_ERR, npe, "incomplete firmware file\n");
|
|
+ goto err;
|
|
+ }
|
|
+ image = (struct dl_image*)fw_entry->data;
|
|
+
|
|
+#if DEBUG_FW
|
|
+ print_npe(KERN_DEBUG, npe, "firmware: %08X %08X %08X (0x%X bytes)\n",
|
|
+ image->magic, image->id, image->size, image->size * 4);
|
|
+#endif
|
|
+
|
|
+ if (image->magic == swab32(FW_MAGIC)) { /* swapped file */
|
|
+ image->id = swab32(image->id);
|
|
+ image->size = swab32(image->size);
|
|
+ } else if (image->magic != FW_MAGIC) {
|
|
+ print_npe(KERN_ERR, npe, "bad firmware file magic: 0x%X\n",
|
|
+ image->magic);
|
|
+ goto err;
|
|
+ }
|
|
+ if ((image->size * 4 + sizeof(struct dl_image)) != fw_entry->size) {
|
|
+ print_npe(KERN_ERR, npe,
|
|
+ "inconsistent size of firmware file\n");
|
|
+ goto err;
|
|
+ }
|
|
+ if (((image->id >> 24) & 0xF /* NPE ID */) != npe->id) {
|
|
+ print_npe(KERN_ERR, npe, "firmware file NPE ID mismatch\n");
|
|
+ goto err;
|
|
+ }
|
|
+ if (image->magic == swab32(FW_MAGIC))
|
|
+ for (i = 0; i < image->size; i++)
|
|
+ image->data[i] = swab32(image->data[i]);
|
|
+
|
|
+ if (!cpu_is_ixp46x() && ((image->id >> 28) & 0xF /* device ID */)) {
|
|
+ print_npe(KERN_INFO, npe, "IXP46x firmware ignored on "
|
|
+ "IXP42x\n");
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ if (npe_running(npe)) {
|
|
+ print_npe(KERN_INFO, npe, "unable to load firmware, NPE is "
|
|
+ "already running\n");
|
|
+ err = -EBUSY;
|
|
+ goto err;
|
|
+ }
|
|
+#if 0
|
|
+ npe_stop(npe);
|
|
+ npe_reset(npe);
|
|
+#endif
|
|
+
|
|
+ print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
|
|
+ "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
|
|
+ (image->id >> 8) & 0xFF, image->id & 0xFF);
|
|
+
|
|
+ if (!cpu_is_ixp46x()) {
|
|
+ if (!npe->id)
|
|
+ instr_size = NPE_A_42X_INSTR_SIZE;
|
|
+ else
|
|
+ instr_size = NPE_B_AND_C_42X_INSTR_SIZE;
|
|
+ data_size = NPE_42X_DATA_SIZE;
|
|
+ } else {
|
|
+ instr_size = NPE_46X_INSTR_SIZE;
|
|
+ data_size = NPE_46X_DATA_SIZE;
|
|
+ }
|
|
+
|
|
+ for (blocks = 0; blocks * sizeof(struct dl_block) / 4 < image->size;
|
|
+ blocks++)
|
|
+ if (image->blocks[blocks].type == FW_BLOCK_TYPE_EOF)
|
|
+ break;
|
|
+ if (blocks * sizeof(struct dl_block) / 4 >= image->size) {
|
|
+ print_npe(KERN_INFO, npe, "firmware EOF block marker not "
|
|
+ "found\n");
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+#if DEBUG_FW
|
|
+ print_npe(KERN_DEBUG, npe, "%i firmware blocks found\n", blocks);
|
|
+#endif
|
|
+
|
|
+ table_end = blocks * sizeof(struct dl_block) / 4 + 1 /* EOF marker */;
|
|
+ for (i = 0, blk = image->blocks; i < blocks; i++, blk++) {
|
|
+ if (blk->offset > image->size - sizeof(struct dl_codeblock) / 4
|
|
+ || blk->offset < table_end) {
|
|
+ print_npe(KERN_INFO, npe, "invalid offset 0x%X of "
|
|
+ "firmware block #%i\n", blk->offset, i);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ cb = (struct dl_codeblock*)&image->data[blk->offset];
|
|
+ if (blk->type == FW_BLOCK_TYPE_INSTR) {
|
|
+ if (cb->npe_addr + cb->size > instr_size)
|
|
+ goto too_big;
|
|
+ cmd = CMD_WR_INS_MEM;
|
|
+ } else if (blk->type == FW_BLOCK_TYPE_DATA) {
|
|
+ if (cb->npe_addr + cb->size > data_size)
|
|
+ goto too_big;
|
|
+ cmd = CMD_WR_DATA_MEM;
|
|
+ } else {
|
|
+ print_npe(KERN_INFO, npe, "invalid firmware block #%i "
|
|
+ "type 0x%X\n", i, blk->type);
|
|
+ goto err;
|
|
+ }
|
|
+ if (blk->offset + sizeof(*cb) / 4 + cb->size > image->size) {
|
|
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't "
|
|
+ "fit in firmware image: type %c, start 0x%X,"
|
|
+ " length 0x%X\n", i,
|
|
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
|
|
+ cb->npe_addr, cb->size);
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ for (j = 0; j < cb->size; j++)
|
|
+ npe_cmd_write(npe, cb->npe_addr + j, cmd, cb->data[j]);
|
|
+ }
|
|
+
|
|
+ npe_start(npe);
|
|
+ if (!npe_running(npe))
|
|
+ print_npe(KERN_ERR, npe, "unable to start\n");
|
|
+ release_firmware(fw_entry);
|
|
+ return 0;
|
|
+
|
|
+too_big:
|
|
+ print_npe(KERN_INFO, npe, "firmware block #%i doesn't fit in NPE "
|
|
+ "memory: type %c, start 0x%X, length 0x%X\n", i,
|
|
+ blk->type == FW_BLOCK_TYPE_INSTR ? 'I' : 'D',
|
|
+ cb->npe_addr, cb->size);
|
|
+err:
|
|
+ release_firmware(fw_entry);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+
|
|
+struct npe *npe_request(int id)
|
|
+{
|
|
+ if (id < NPE_COUNT)
|
|
+ if (npe_tab[id].valid)
|
|
+ if (try_module_get(THIS_MODULE))
|
|
+ return &npe_tab[id];
|
|
+ return NULL;
|
|
+}
|
|
+
|
|
+void npe_release(struct npe *npe)
|
|
+{
|
|
+ module_put(THIS_MODULE);
|
|
+}
|
|
+
|
|
+
|
|
+static int __init npe_init_module(void)
|
|
+{
|
|
+
|
|
+ int i, found = 0;
|
|
+
|
|
+ for (i = 0; i < NPE_COUNT; i++) {
|
|
+ struct npe *npe = &npe_tab[i];
|
|
+ if (!(ixp4xx_read_feature_bits() &
|
|
+ (IXP4XX_FEATURE_RESET_NPEA << i)))
|
|
+ continue; /* NPE already disabled or not present */
|
|
+ if (!(npe->mem_res = request_mem_region(npe->regs_phys,
|
|
+ REGS_SIZE,
|
|
+ npe_name(npe)))) {
|
|
+ print_npe(KERN_ERR, npe,
|
|
+ "failed to request memory region\n");
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ if (npe_reset(npe))
|
|
+ continue;
|
|
+ npe->valid = 1;
|
|
+ found++;
|
|
+ }
|
|
+
|
|
+ if (!found)
|
|
+ return -ENOSYS;
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void __exit npe_cleanup_module(void)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < NPE_COUNT; i++)
|
|
+ if (npe_tab[i].mem_res) {
|
|
+ npe_reset(&npe_tab[i]);
|
|
+ release_resource(npe_tab[i].mem_res);
|
|
+ }
|
|
+}
|
|
+
|
|
+module_init(npe_init_module);
|
|
+module_exit(npe_cleanup_module);
|
|
+
|
|
+MODULE_AUTHOR("Krzysztof Halasa");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+
|
|
+EXPORT_SYMBOL(npe_names);
|
|
+EXPORT_SYMBOL(npe_running);
|
|
+EXPORT_SYMBOL(npe_request);
|
|
+EXPORT_SYMBOL(npe_release);
|
|
+EXPORT_SYMBOL(npe_load_firmware);
|
|
+EXPORT_SYMBOL(npe_send_message);
|
|
+EXPORT_SYMBOL(npe_recv_message);
|
|
+EXPORT_SYMBOL(npe_send_recv_message);
|
|
Index: linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
|
|
@@ -0,0 +1,274 @@
|
|
+/*
|
|
+ * Intel IXP4xx Queue Manager driver for Linux
|
|
+ *
|
|
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of version 2 of the GNU General Public License
|
|
+ * as published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/ioport.h>
|
|
+#include <linux/interrupt.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/module.h>
|
|
+#include <asm/arch/qmgr.h>
|
|
+
|
|
+#define DEBUG 0
|
|
+
|
|
+struct qmgr_regs __iomem *qmgr_regs;
|
|
+static struct resource *mem_res;
|
|
+static spinlock_t qmgr_lock;
|
|
+static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
|
|
+static void (*irq_handlers[HALF_QUEUES])(void *pdev);
|
|
+static void *irq_pdevs[HALF_QUEUES];
|
|
+
|
|
+void qmgr_set_irq(unsigned int queue, int src,
|
|
+ void (*handler)(void *pdev), void *pdev)
|
|
+{
|
|
+ u32 __iomem *reg = &qmgr_regs->irqsrc[queue / 8]; /* 8 queues / u32 */
|
|
+ int bit = (queue % 8) * 4; /* 3 bits + 1 reserved bit per queue */
|
|
+ unsigned long flags;
|
|
+
|
|
+ src &= 7;
|
|
+ spin_lock_irqsave(&qmgr_lock, flags);
|
|
+ __raw_writel((__raw_readl(reg) & ~(7 << bit)) | (src << bit), reg);
|
|
+ irq_handlers[queue] = handler;
|
|
+ irq_pdevs[queue] = pdev;
|
|
+ spin_unlock_irqrestore(&qmgr_lock, flags);
|
|
+}
|
|
+
|
|
+
|
|
+static irqreturn_t qmgr_irq1(int irq, void *pdev)
|
|
+{
|
|
+ int i;
|
|
+ u32 val = __raw_readl(&qmgr_regs->irqstat[0]);
|
|
+ __raw_writel(val, &qmgr_regs->irqstat[0]); /* ACK */
|
|
+
|
|
+ for (i = 0; i < HALF_QUEUES; i++)
|
|
+ if (val & (1 << i))
|
|
+ irq_handlers[i](irq_pdevs[i]);
|
|
+
|
|
+ return val ? IRQ_HANDLED : 0;
|
|
+}
|
|
+
|
|
+
|
|
+void qmgr_enable_irq(unsigned int queue)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&qmgr_lock, flags);
|
|
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) | (1 << queue),
|
|
+ &qmgr_regs->irqen[0]);
|
|
+ spin_unlock_irqrestore(&qmgr_lock, flags);
|
|
+}
|
|
+
|
|
+void qmgr_disable_irq(unsigned int queue)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&qmgr_lock, flags);
|
|
+ __raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
|
|
+ &qmgr_regs->irqen[0]);
|
|
+ spin_unlock_irqrestore(&qmgr_lock, flags);
|
|
+}
|
|
+
|
|
+static inline void shift_mask(u32 *mask)
|
|
+{
|
|
+ mask[3] = mask[3] << 1 | mask[2] >> 31;
|
|
+ mask[2] = mask[2] << 1 | mask[1] >> 31;
|
|
+ mask[1] = mask[1] << 1 | mask[0] >> 31;
|
|
+ mask[0] <<= 1;
|
|
+}
|
|
+
|
|
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
|
|
+ unsigned int nearly_empty_watermark,
|
|
+ unsigned int nearly_full_watermark)
|
|
+{
|
|
+ u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
|
|
+ int err;
|
|
+
|
|
+ if (queue >= HALF_QUEUES)
|
|
+ return -ERANGE;
|
|
+
|
|
+ if ((nearly_empty_watermark | nearly_full_watermark) & ~7)
|
|
+ return -EINVAL;
|
|
+
|
|
+ switch (len) {
|
|
+ case 16:
|
|
+ cfg = 0 << 24;
|
|
+ mask[0] = 0x1;
|
|
+ break;
|
|
+ case 32:
|
|
+ cfg = 1 << 24;
|
|
+ mask[0] = 0x3;
|
|
+ break;
|
|
+ case 64:
|
|
+ cfg = 2 << 24;
|
|
+ mask[0] = 0xF;
|
|
+ break;
|
|
+ case 128:
|
|
+ cfg = 3 << 24;
|
|
+ mask[0] = 0xFF;
|
|
+ break;
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+
|
|
+ cfg |= nearly_empty_watermark << 26;
|
|
+ cfg |= nearly_full_watermark << 29;
|
|
+ len /= 16; /* in 16-dwords: 1, 2, 4 or 8 */
|
|
+ mask[1] = mask[2] = mask[3] = 0;
|
|
+
|
|
+ if (!try_module_get(THIS_MODULE))
|
|
+ return -ENODEV;
|
|
+
|
|
+ spin_lock_irq(&qmgr_lock);
|
|
+ if (__raw_readl(&qmgr_regs->sram[queue])) {
|
|
+ err = -EBUSY;
|
|
+ goto err;
|
|
+ }
|
|
+
|
|
+ while (1) {
|
|
+ if (!(used_sram_bitmap[0] & mask[0]) &&
|
|
+ !(used_sram_bitmap[1] & mask[1]) &&
|
|
+ !(used_sram_bitmap[2] & mask[2]) &&
|
|
+ !(used_sram_bitmap[3] & mask[3]))
|
|
+ break; /* found free space */
|
|
+
|
|
+ addr++;
|
|
+ shift_mask(mask);
|
|
+ if (addr + len > ARRAY_SIZE(qmgr_regs->sram)) {
|
|
+ printk(KERN_ERR "qmgr: no free SRAM space for"
|
|
+ " queue %i\n", queue);
|
|
+ err = -ENOMEM;
|
|
+ goto err;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ used_sram_bitmap[0] |= mask[0];
|
|
+ used_sram_bitmap[1] |= mask[1];
|
|
+ used_sram_bitmap[2] |= mask[2];
|
|
+ used_sram_bitmap[3] |= mask[3];
|
|
+ __raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
|
|
+ spin_unlock_irq(&qmgr_lock);
|
|
+
|
|
+#if DEBUG
|
|
+ printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
|
|
+ queue, addr);
|
|
+#endif
|
|
+ return 0;
|
|
+
|
|
+err:
|
|
+ spin_unlock_irq(&qmgr_lock);
|
|
+ module_put(THIS_MODULE);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+void qmgr_release_queue(unsigned int queue)
|
|
+{
|
|
+ u32 cfg, addr, mask[4];
|
|
+
|
|
+ BUG_ON(queue >= HALF_QUEUES); /* not in valid range */
|
|
+
|
|
+ spin_lock_irq(&qmgr_lock);
|
|
+ cfg = __raw_readl(&qmgr_regs->sram[queue]);
|
|
+ addr = (cfg >> 14) & 0xFF;
|
|
+
|
|
+ BUG_ON(!addr); /* not requested */
|
|
+
|
|
+ switch ((cfg >> 24) & 3) {
|
|
+ case 0: mask[0] = 0x1; break;
|
|
+ case 1: mask[0] = 0x3; break;
|
|
+ case 2: mask[0] = 0xF; break;
|
|
+ case 3: mask[0] = 0xFF; break;
|
|
+ }
|
|
+
|
|
+ while (addr--)
|
|
+ shift_mask(mask);
|
|
+
|
|
+ __raw_writel(0, &qmgr_regs->sram[queue]);
|
|
+
|
|
+ used_sram_bitmap[0] &= ~mask[0];
|
|
+ used_sram_bitmap[1] &= ~mask[1];
|
|
+ used_sram_bitmap[2] &= ~mask[2];
|
|
+ used_sram_bitmap[3] &= ~mask[3];
|
|
+ irq_handlers[queue] = NULL; /* catch IRQ bugs */
|
|
+ spin_unlock_irq(&qmgr_lock);
|
|
+
|
|
+ module_put(THIS_MODULE);
|
|
+#if DEBUG
|
|
+ printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static int qmgr_init(void)
|
|
+{
|
|
+ int i, err;
|
|
+ mem_res = request_mem_region(IXP4XX_QMGR_BASE_PHYS,
|
|
+ IXP4XX_QMGR_REGION_SIZE,
|
|
+ "IXP4xx Queue Manager");
|
|
+ if (mem_res == NULL)
|
|
+ return -EBUSY;
|
|
+
|
|
+ qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
|
|
+ if (qmgr_regs == NULL) {
|
|
+ err = -ENOMEM;
|
|
+ goto error_map;
|
|
+ }
|
|
+
|
|
+ /* reset qmgr registers */
|
|
+ for (i = 0; i < 4; i++) {
|
|
+ __raw_writel(0x33333333, &qmgr_regs->stat1[i]);
|
|
+ __raw_writel(0, &qmgr_regs->irqsrc[i]);
|
|
+ }
|
|
+ for (i = 0; i < 2; i++) {
|
|
+ __raw_writel(0, &qmgr_regs->stat2[i]);
|
|
+ __raw_writel(0xFFFFFFFF, &qmgr_regs->irqstat[i]); /* clear */
|
|
+ __raw_writel(0, &qmgr_regs->irqen[i]);
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < QUEUES; i++)
|
|
+ __raw_writel(0, &qmgr_regs->sram[i]);
|
|
+
|
|
+ err = request_irq(IRQ_IXP4XX_QM1, qmgr_irq1, 0,
|
|
+ "IXP4xx Queue Manager", NULL);
|
|
+ if (err) {
|
|
+ printk(KERN_ERR "qmgr: failed to request IRQ%i\n",
|
|
+ IRQ_IXP4XX_QM1);
|
|
+ goto error_irq;
|
|
+ }
|
|
+
|
|
+ used_sram_bitmap[0] = 0xF; /* 4 first pages reserved for config */
|
|
+ spin_lock_init(&qmgr_lock);
|
|
+
|
|
+ printk(KERN_INFO "IXP4xx Queue Manager initialized.\n");
|
|
+ return 0;
|
|
+
|
|
+error_irq:
|
|
+ iounmap(qmgr_regs);
|
|
+error_map:
|
|
+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void qmgr_remove(void)
|
|
+{
|
|
+ free_irq(IRQ_IXP4XX_QM1, NULL);
|
|
+ synchronize_irq(IRQ_IXP4XX_QM1);
|
|
+ iounmap(qmgr_regs);
|
|
+ release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE);
|
|
+}
|
|
+
|
|
+module_init(qmgr_init);
|
|
+module_exit(qmgr_remove);
|
|
+
|
|
+MODULE_LICENSE("GPL v2");
|
|
+MODULE_AUTHOR("Krzysztof Halasa");
|
|
+
|
|
+EXPORT_SYMBOL(qmgr_regs);
|
|
+EXPORT_SYMBOL(qmgr_set_irq);
|
|
+EXPORT_SYMBOL(qmgr_enable_irq);
|
|
+EXPORT_SYMBOL(qmgr_disable_irq);
|
|
+EXPORT_SYMBOL(qmgr_request_queue);
|
|
+EXPORT_SYMBOL(qmgr_release_queue);
|
|
Index: linux-2.6.23.17/drivers/net/arm/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/drivers/net/arm/Kconfig
|
|
+++ linux-2.6.23.17/drivers/net/arm/Kconfig
|
|
@@ -47,3 +47,13 @@ config EP93XX_ETH
|
|
help
|
|
This is a driver for the ethernet hardware included in EP93xx CPUs.
|
|
Say Y if you are building a kernel for EP93xx based devices.
|
|
+
|
|
+config IXP4XX_ETH
|
|
+ tristate "IXP4xx Ethernet support"
|
|
+ depends on NET_ETHERNET && ARM && ARCH_IXP4XX
|
|
+ select IXP4XX_NPE
|
|
+ select IXP4XX_QMGR
|
|
+ select MII
|
|
+ help
|
|
+ Say Y here if you want to use built-in Ethernet ports
|
|
+ on IXP4xx processor.
|
|
Index: linux-2.6.23.17/drivers/net/arm/Makefile
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/drivers/net/arm/Makefile
|
|
+++ linux-2.6.23.17/drivers/net/arm/Makefile
|
|
@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
|
|
obj-$(CONFIG_ARM_ETHER1) += ether1.o
|
|
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
|
|
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
|
|
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
|
|
Index: linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/drivers/net/arm/ixp4xx_eth.c
|
|
@@ -0,0 +1,1259 @@
|
|
+/*
|
|
+ * Intel IXP4xx Ethernet driver for Linux
|
|
+ *
|
|
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of version 2 of the GNU General Public License
|
|
+ * as published by the Free Software Foundation.
|
|
+ *
|
|
+ * Ethernet port config (0x00 is not present on IXP42X):
|
|
+ *
|
|
+ * logical port 0x00 0x10 0x20
|
|
+ * NPE 0 (NPE-A) 1 (NPE-B) 2 (NPE-C)
|
|
+ * physical PortId 2 0 1
|
|
+ * TX queue 23 24 25
|
|
+ * RX-free queue 26 27 28
|
|
+ * TX-done queue is always 31, per-port RX and TX-ready queues are configurable
|
|
+ *
|
|
+ *
|
|
+ * Queue entries:
|
|
+ * bits 0 -> 1 - NPE ID (RX and TX-done)
|
|
+ * bits 0 -> 2 - priority (TX, per 802.1D)
|
|
+ * bits 3 -> 4 - port ID (user-set?)
|
|
+ * bits 5 -> 31 - physical descriptor address
|
|
+ */
|
|
+
|
|
+#include <linux/delay.h>
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/dmapool.h>
|
|
+#include <linux/etherdevice.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/mii.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <asm/arch/npe.h>
|
|
+#include <asm/arch/qmgr.h>
|
|
+
|
|
+#define DEBUG_QUEUES 0
|
|
+#define DEBUG_DESC 0
|
|
+#define DEBUG_RX 0
|
|
+#define DEBUG_TX 0
|
|
+#define DEBUG_PKT_BYTES 0
|
|
+#define DEBUG_MDIO 0
|
|
+#define DEBUG_CLOSE 0
|
|
+
|
|
+#define DRV_NAME "ixp4xx_eth"
|
|
+
|
|
+#define MAX_NPES 3
|
|
+
|
|
+#define RX_DESCS 64 /* also length of all RX queues */
|
|
+#define TX_DESCS 16 /* also length of all TX queues */
|
|
+#define TXDONE_QUEUE_LEN 64 /* dwords */
|
|
+
|
|
+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
|
|
+#define REGS_SIZE 0x1000
|
|
+#define MAX_MRU 1536 /* 0x600 */
|
|
+
|
|
+#define MDIO_INTERVAL (3 * HZ)
|
|
+#define MAX_MDIO_RETRIES 100 /* microseconds, typically 30 cycles */
|
|
+#define MAX_MII_RESET_RETRIES 100 /* mdio_read() cycles, typically 4 */
|
|
+#define MAX_CLOSE_WAIT 1000 /* microseconds, typically 2-3 cycles */
|
|
+
|
|
+#define NPE_ID(port_id) ((port_id) >> 4)
|
|
+#define PHYSICAL_ID(port_id) ((NPE_ID(port_id) + 2) % 3)
|
|
+#define TX_QUEUE(port_id) (NPE_ID(port_id) + 23)
|
|
+#define RXFREE_QUEUE(port_id) (NPE_ID(port_id) + 26)
|
|
+#define TXDONE_QUEUE 31
|
|
+
|
|
+/* TX Control Registers */
|
|
+#define TX_CNTRL0_TX_EN 0x01
|
|
+#define TX_CNTRL0_HALFDUPLEX 0x02
|
|
+#define TX_CNTRL0_RETRY 0x04
|
|
+#define TX_CNTRL0_PAD_EN 0x08
|
|
+#define TX_CNTRL0_APPEND_FCS 0x10
|
|
+#define TX_CNTRL0_2DEFER 0x20
|
|
+#define TX_CNTRL0_RMII 0x40 /* reduced MII */
|
|
+#define TX_CNTRL1_RETRIES 0x0F /* 4 bits */
|
|
+
|
|
+/* RX Control Registers */
|
|
+#define RX_CNTRL0_RX_EN 0x01
|
|
+#define RX_CNTRL0_PADSTRIP_EN 0x02
|
|
+#define RX_CNTRL0_SEND_FCS 0x04
|
|
+#define RX_CNTRL0_PAUSE_EN 0x08
|
|
+#define RX_CNTRL0_LOOP_EN 0x10
|
|
+#define RX_CNTRL0_ADDR_FLTR_EN 0x20
|
|
+#define RX_CNTRL0_RX_RUNT_EN 0x40
|
|
+#define RX_CNTRL0_BCAST_DIS 0x80
|
|
+#define RX_CNTRL1_DEFER_EN 0x01
|
|
+
|
|
+/* Core Control Register */
|
|
+#define CORE_RESET 0x01
|
|
+#define CORE_RX_FIFO_FLUSH 0x02
|
|
+#define CORE_TX_FIFO_FLUSH 0x04
|
|
+#define CORE_SEND_JAM 0x08
|
|
+#define CORE_MDC_EN 0x10 /* MDIO using NPE-B ETH-0 only */
|
|
+
|
|
+#define DEFAULT_TX_CNTRL0 (TX_CNTRL0_TX_EN | TX_CNTRL0_RETRY | \
|
|
+ TX_CNTRL0_PAD_EN | TX_CNTRL0_APPEND_FCS | \
|
|
+ TX_CNTRL0_2DEFER)
|
|
+#define DEFAULT_RX_CNTRL0 RX_CNTRL0_RX_EN
|
|
+#define DEFAULT_CORE_CNTRL CORE_MDC_EN
|
|
+
|
|
+
|
|
+/* NPE message codes */
|
|
+#define NPE_GETSTATUS 0x00
|
|
+#define NPE_EDB_SETPORTADDRESS 0x01
|
|
+#define NPE_EDB_GETMACADDRESSDATABASE 0x02
|
|
+#define NPE_EDB_SETMACADDRESSSDATABASE 0x03
|
|
+#define NPE_GETSTATS 0x04
|
|
+#define NPE_RESETSTATS 0x05
|
|
+#define NPE_SETMAXFRAMELENGTHS 0x06
|
|
+#define NPE_VLAN_SETRXTAGMODE 0x07
|
|
+#define NPE_VLAN_SETDEFAULTRXVID 0x08
|
|
+#define NPE_VLAN_SETPORTVLANTABLEENTRY 0x09
|
|
+#define NPE_VLAN_SETPORTVLANTABLERANGE 0x0A
|
|
+#define NPE_VLAN_SETRXQOSENTRY 0x0B
|
|
+#define NPE_VLAN_SETPORTIDEXTRACTIONMODE 0x0C
|
|
+#define NPE_STP_SETBLOCKINGSTATE 0x0D
|
|
+#define NPE_FW_SETFIREWALLMODE 0x0E
|
|
+#define NPE_PC_SETFRAMECONTROLDURATIONID 0x0F
|
|
+#define NPE_PC_SETAPMACTABLE 0x11
|
|
+#define NPE_SETLOOPBACK_MODE 0x12
|
|
+#define NPE_PC_SETBSSIDTABLE 0x13
|
|
+#define NPE_ADDRESS_FILTER_CONFIG 0x14
|
|
+#define NPE_APPENDFCSCONFIG 0x15
|
|
+#define NPE_NOTIFY_MAC_RECOVERY_DONE 0x16
|
|
+#define NPE_MAC_RECOVERY_START 0x17
|
|
+
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+typedef struct sk_buff buffer_t;
|
|
+#define free_buffer dev_kfree_skb
|
|
+#define free_buffer_irq dev_kfree_skb_irq
|
|
+#else
|
|
+typedef void buffer_t;
|
|
+#define free_buffer kfree
|
|
+#define free_buffer_irq kfree
|
|
+#endif
|
|
+
|
|
+struct eth_regs {
|
|
+ u32 tx_control[2], __res1[2]; /* 000 */
|
|
+ u32 rx_control[2], __res2[2]; /* 010 */
|
|
+ u32 random_seed, __res3[3]; /* 020 */
|
|
+ u32 partial_empty_threshold, __res4; /* 030 */
|
|
+ u32 partial_full_threshold, __res5; /* 038 */
|
|
+ u32 tx_start_bytes, __res6[3]; /* 040 */
|
|
+ u32 tx_deferral, rx_deferral,__res7[2]; /* 050 */
|
|
+ u32 tx_2part_deferral[2], __res8[2]; /* 060 */
|
|
+ u32 slot_time, __res9[3]; /* 070 */
|
|
+ u32 mdio_command[4]; /* 080 */
|
|
+ u32 mdio_status[4]; /* 090 */
|
|
+ u32 mcast_mask[6], __res10[2]; /* 0A0 */
|
|
+ u32 mcast_addr[6], __res11[2]; /* 0C0 */
|
|
+ u32 int_clock_threshold, __res12[3]; /* 0E0 */
|
|
+ u32 hw_addr[6], __res13[61]; /* 0F0 */
|
|
+ u32 core_control; /* 1FC */
|
|
+};
|
|
+
|
|
+struct port {
|
|
+ struct resource *mem_res;
|
|
+ struct eth_regs __iomem *regs;
|
|
+ struct npe *npe;
|
|
+ struct net_device *netdev;
|
|
+ struct net_device_stats stat;
|
|
+ struct mii_if_info mii;
|
|
+ struct delayed_work mdio_thread;
|
|
+ struct eth_plat_info *plat;
|
|
+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
|
|
+ struct desc *desc_tab; /* coherent */
|
|
+ u32 desc_tab_phys;
|
|
+ int id; /* logical port ID */
|
|
+ u16 mii_bmcr;
|
|
+};
|
|
+
|
|
+/* NPE message structure */
|
|
+struct msg {
|
|
+#ifdef __ARMEB__
|
|
+ u8 cmd, eth_id, byte2, byte3;
|
|
+ u8 byte4, byte5, byte6, byte7;
|
|
+#else
|
|
+ u8 byte3, byte2, eth_id, cmd;
|
|
+ u8 byte7, byte6, byte5, byte4;
|
|
+#endif
|
|
+};
|
|
+
|
|
+/* Ethernet packet descriptor */
|
|
+struct desc {
|
|
+ u32 next; /* pointer to next buffer, unused */
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ u16 buf_len; /* buffer length */
|
|
+ u16 pkt_len; /* packet length */
|
|
+ u32 data; /* pointer to data buffer in RAM */
|
|
+ u8 dest_id;
|
|
+ u8 src_id;
|
|
+ u16 flags;
|
|
+ u8 qos;
|
|
+ u8 padlen;
|
|
+ u16 vlan_tci;
|
|
+#else
|
|
+ u16 pkt_len; /* packet length */
|
|
+ u16 buf_len; /* buffer length */
|
|
+ u32 data; /* pointer to data buffer in RAM */
|
|
+ u16 flags;
|
|
+ u8 src_id;
|
|
+ u8 dest_id;
|
|
+ u16 vlan_tci;
|
|
+ u8 padlen;
|
|
+ u8 qos;
|
|
+#endif
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ u8 dst_mac_0, dst_mac_1, dst_mac_2, dst_mac_3;
|
|
+ u8 dst_mac_4, dst_mac_5, src_mac_0, src_mac_1;
|
|
+ u8 src_mac_2, src_mac_3, src_mac_4, src_mac_5;
|
|
+#else
|
|
+ u8 dst_mac_3, dst_mac_2, dst_mac_1, dst_mac_0;
|
|
+ u8 src_mac_1, src_mac_0, dst_mac_5, dst_mac_4;
|
|
+ u8 src_mac_5, src_mac_4, src_mac_3, src_mac_2;
|
|
+#endif
|
|
+};
|
|
+
|
|
+
|
|
+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
|
|
+ (n) * sizeof(struct desc))
|
|
+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
|
|
+
|
|
+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
|
|
+ ((n) + RX_DESCS) * sizeof(struct desc))
|
|
+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
|
|
+
|
|
+#ifndef __ARMEB__
|
|
+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
|
|
+{
|
|
+ int i;
|
|
+ for (i = 0; i < cnt; i++)
|
|
+ dest[i] = swab32(src[i]);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static spinlock_t mdio_lock;
|
|
+static struct eth_regs __iomem *mdio_regs; /* mdio command and status only */
|
|
+static int ports_open;
|
|
+static struct port *npe_port_tab[MAX_NPES];
|
|
+static struct dma_pool *dma_pool;
|
|
+
|
|
+
|
|
+static u16 mdio_cmd(struct net_device *dev, int phy_id, int location,
|
|
+ int write, u16 cmd)
|
|
+{
|
|
+ int cycles = 0;
|
|
+
|
|
+ if (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80) {
|
|
+ printk(KERN_ERR "%s: MII not ready to transmit\n", dev->name);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ if (write) {
|
|
+ __raw_writel(cmd & 0xFF, &mdio_regs->mdio_command[0]);
|
|
+ __raw_writel(cmd >> 8, &mdio_regs->mdio_command[1]);
|
|
+ }
|
|
+ __raw_writel(((phy_id << 5) | location) & 0xFF,
|
|
+ &mdio_regs->mdio_command[2]);
|
|
+ __raw_writel((phy_id >> 3) | (write << 2) | 0x80 /* GO */,
|
|
+ &mdio_regs->mdio_command[3]);
|
|
+
|
|
+ while ((cycles < MAX_MDIO_RETRIES) &&
|
|
+ (__raw_readl(&mdio_regs->mdio_command[3]) & 0x80)) {
|
|
+ udelay(1);
|
|
+ cycles++;
|
|
+ }
|
|
+
|
|
+ if (cycles == MAX_MDIO_RETRIES) {
|
|
+ printk(KERN_ERR "%s: MII write failed\n", dev->name);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+#if DEBUG_MDIO
|
|
+ printk(KERN_DEBUG "%s: mdio_cmd() took %i cycles\n", dev->name,
|
|
+ cycles);
|
|
+#endif
|
|
+
|
|
+ if (write)
|
|
+ return 0;
|
|
+
|
|
+ if (__raw_readl(&mdio_regs->mdio_status[3]) & 0x80) {
|
|
+ printk(KERN_ERR "%s: MII read failed\n", dev->name);
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ return (__raw_readl(&mdio_regs->mdio_status[0]) & 0xFF) |
|
|
+ (__raw_readl(&mdio_regs->mdio_status[1]) << 8);
|
|
+}
|
|
+
|
|
+static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
+{
|
|
+ unsigned long flags;
|
|
+ u16 val;
|
|
+
|
|
+ spin_lock_irqsave(&mdio_lock, flags);
|
|
+ val = mdio_cmd(dev, phy_id, location, 0, 0);
|
|
+ spin_unlock_irqrestore(&mdio_lock, flags);
|
|
+ return val;
|
|
+}
|
|
+
|
|
+static void mdio_write(struct net_device *dev, int phy_id, int location,
|
|
+ int val)
|
|
+{
|
|
+ unsigned long flags;
|
|
+
|
|
+ spin_lock_irqsave(&mdio_lock, flags);
|
|
+ mdio_cmd(dev, phy_id, location, 1, val);
|
|
+ spin_unlock_irqrestore(&mdio_lock, flags);
|
|
+}
|
|
+
|
|
+static void phy_reset(struct net_device *dev, int phy_id)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ int cycles = 0;
|
|
+
|
|
+ mdio_write(dev, phy_id, MII_BMCR, port->mii_bmcr | BMCR_RESET);
|
|
+
|
|
+ while (cycles < MAX_MII_RESET_RETRIES) {
|
|
+ if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
|
|
+#if DEBUG_MDIO
|
|
+ printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
|
|
+ dev->name, cycles);
|
|
+#endif
|
|
+ return;
|
|
+ }
|
|
+ udelay(1);
|
|
+ cycles++;
|
|
+ }
|
|
+
|
|
+ printk(KERN_ERR "%s: MII reset failed\n", dev->name);
|
|
+}
|
|
+
|
|
+static void eth_set_duplex(struct port *port)
|
|
+{
|
|
+ if (port->mii.full_duplex)
|
|
+ __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
|
|
+ &port->regs->tx_control[0]);
|
|
+ else
|
|
+ __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
|
|
+ &port->regs->tx_control[0]);
|
|
+}
|
|
+
|
|
+
|
|
+static void phy_check_media(struct port *port, int init)
|
|
+{
|
|
+ if (mii_check_media(&port->mii, 1, init))
|
|
+ eth_set_duplex(port);
|
|
+ if (port->mii.force_media) { /* mii_check_media() doesn't work */
|
|
+ struct net_device *dev = port->netdev;
|
|
+ int cur_link = mii_link_ok(&port->mii);
|
|
+ int prev_link = netif_carrier_ok(dev);
|
|
+
|
|
+ if (!prev_link && cur_link) {
|
|
+ printk(KERN_INFO "%s: link up\n", dev->name);
|
|
+ netif_carrier_on(dev);
|
|
+ } else if (prev_link && !cur_link) {
|
|
+ printk(KERN_INFO "%s: link down\n", dev->name);
|
|
+ netif_carrier_off(dev);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+static void mdio_thread(struct work_struct *work)
|
|
+{
|
|
+ struct port *port = container_of(work, struct port, mdio_thread.work);
|
|
+
|
|
+ phy_check_media(port, 0);
|
|
+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
|
|
+}
|
|
+
|
|
+
|
|
+static inline void debug_pkt(struct net_device *dev, const char *func,
|
|
+ u8 *data, int len)
|
|
+{
|
|
+#if DEBUG_PKT_BYTES
|
|
+ int i;
|
|
+
|
|
+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
|
|
+ for (i = 0; i < len; i++) {
|
|
+ if (i >= DEBUG_PKT_BYTES)
|
|
+ break;
|
|
+ printk("%s%02X",
|
|
+ ((i == 6) || (i == 12) || (i >= 14)) ? " " : "",
|
|
+ data[i]);
|
|
+ }
|
|
+ printk("\n");
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+static inline void debug_desc(u32 phys, struct desc *desc)
|
|
+{
|
|
+#if DEBUG_DESC
|
|
+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
|
|
+ " %X %X %02X%02X%02X%02X%02X%02X < %02X%02X%02X%02X%02X%02X\n",
|
|
+ phys, desc->next, desc->buf_len, desc->pkt_len,
|
|
+ desc->data, desc->dest_id, desc->src_id, desc->flags,
|
|
+ desc->qos, desc->padlen, desc->vlan_tci,
|
|
+ desc->dst_mac_0, desc->dst_mac_1, desc->dst_mac_2,
|
|
+ desc->dst_mac_3, desc->dst_mac_4, desc->dst_mac_5,
|
|
+ desc->src_mac_0, desc->src_mac_1, desc->src_mac_2,
|
|
+ desc->src_mac_3, desc->src_mac_4, desc->src_mac_5);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
|
|
+{
|
|
+#if DEBUG_QUEUES
|
|
+ static struct {
|
|
+ int queue;
|
|
+ char *name;
|
|
+ } names[] = {
|
|
+ { TX_QUEUE(0x10), "TX#0 " },
|
|
+ { TX_QUEUE(0x20), "TX#1 " },
|
|
+ { TX_QUEUE(0x00), "TX#2 " },
|
|
+ { RXFREE_QUEUE(0x10), "RX-free#0 " },
|
|
+ { RXFREE_QUEUE(0x20), "RX-free#1 " },
|
|
+ { RXFREE_QUEUE(0x00), "RX-free#2 " },
|
|
+ { TXDONE_QUEUE, "TX-done " },
|
|
+ };
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(names); i++)
|
|
+ if (names[i].queue == queue)
|
|
+ break;
|
|
+
|
|
+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
|
|
+ i < ARRAY_SIZE(names) ? names[i].name : "",
|
|
+ is_get ? "->" : "<-", phys);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static inline u32 queue_get_entry(unsigned int queue)
|
|
+{
|
|
+ u32 phys = qmgr_get_entry(queue);
|
|
+ debug_queue(queue, 1, phys);
|
|
+ return phys;
|
|
+}
|
|
+
|
|
+static inline int queue_get_desc(unsigned int queue, struct port *port,
|
|
+ int is_tx)
|
|
+{
|
|
+ u32 phys, tab_phys, n_desc;
|
|
+ struct desc *tab;
|
|
+
|
|
+ if (!(phys = queue_get_entry(queue)))
|
|
+ return -1;
|
|
+
|
|
+ phys &= ~0x1F; /* mask out non-address bits */
|
|
+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
|
|
+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
|
|
+ n_desc = (phys - tab_phys) / sizeof(struct desc);
|
|
+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
|
|
+ debug_desc(phys, &tab[n_desc]);
|
|
+ BUG_ON(tab[n_desc].next);
|
|
+ return n_desc;
|
|
+}
|
|
+
|
|
+static inline void queue_put_desc(unsigned int queue, u32 phys,
|
|
+ struct desc *desc)
|
|
+{
|
|
+ debug_queue(queue, 0, phys);
|
|
+ debug_desc(phys, desc);
|
|
+ BUG_ON(phys & 0x1F);
|
|
+ qmgr_put_entry(queue, phys);
|
|
+ BUG_ON(qmgr_stat_overflow(queue));
|
|
+}
|
|
+
|
|
+
|
|
+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
|
|
+{
|
|
+#ifdef __ARMEB__
|
|
+ dma_unmap_single(&port->netdev->dev, desc->data,
|
|
+ desc->buf_len, DMA_TO_DEVICE);
|
|
+#else
|
|
+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
|
|
+ ALIGN((desc->data & 3) + desc->buf_len, 4),
|
|
+ DMA_TO_DEVICE);
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+static void eth_rx_irq(void *pdev)
|
|
+{
|
|
+ struct net_device *dev = pdev;
|
|
+ struct port *port = netdev_priv(dev);
|
|
+
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
|
|
+#endif
|
|
+ qmgr_disable_irq(port->plat->rxq);
|
|
+ netif_rx_schedule(dev);
|
|
+}
|
|
+
|
|
+static int eth_poll(struct net_device *dev, int *budget)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ unsigned int rxq = port->plat->rxq, rxfreeq = RXFREE_QUEUE(port->id);
|
|
+ int quota = dev->quota, received = 0;
|
|
+
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: eth_poll\n", dev->name);
|
|
+#endif
|
|
+
|
|
+ while (quota) {
|
|
+ struct sk_buff *skb;
|
|
+ struct desc *desc;
|
|
+ int n;
|
|
+#ifdef __ARMEB__
|
|
+ struct sk_buff *temp;
|
|
+ u32 phys;
|
|
+#endif
|
|
+
|
|
+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
|
|
+ dev->quota -= received; /* No packet received */
|
|
+ *budget -= received;
|
|
+ received = 0;
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: eth_poll netif_rx_complete\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ netif_rx_complete(dev);
|
|
+ qmgr_enable_irq(rxq);
|
|
+ if (!qmgr_stat_empty(rxq) &&
|
|
+ netif_rx_reschedule(dev, 0)) {
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: eth_poll"
|
|
+ " netif_rx_reschedule successed\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ qmgr_disable_irq(rxq);
|
|
+ continue;
|
|
+ }
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: eth_poll all done\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ return 0; /* all work done */
|
|
+ }
|
|
+
|
|
+ desc = rx_desc_ptr(port, n);
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ if ((skb = netdev_alloc_skb(dev, MAX_MRU)) != NULL) {
|
|
+ phys = dma_map_single(&dev->dev, skb->data,
|
|
+ MAX_MRU, DMA_FROM_DEVICE);
|
|
+ if (dma_mapping_error(phys)) {
|
|
+ dev_kfree_skb(skb);
|
|
+ skb = NULL;
|
|
+ }
|
|
+ }
|
|
+#else
|
|
+ skb = netdev_alloc_skb(dev, desc->pkt_len);
|
|
+#endif
|
|
+
|
|
+ if (!skb) {
|
|
+ port->stat.rx_dropped++;
|
|
+ /* put the desc back on RX-ready queue */
|
|
+ desc->buf_len = MAX_MRU;
|
|
+ desc->pkt_len = 0;
|
|
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ /* process received frame */
|
|
+#ifdef __ARMEB__
|
|
+ temp = skb;
|
|
+ skb = port->rx_buff_tab[n];
|
|
+ dma_unmap_single(&dev->dev, desc->data,
|
|
+ MAX_MRU, DMA_FROM_DEVICE);
|
|
+#else
|
|
+ dma_sync_single(&dev->dev, desc->data,
|
|
+ MAX_MRU, DMA_FROM_DEVICE);
|
|
+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
|
|
+ ALIGN(desc->pkt_len, 4) / 4);
|
|
+#endif
|
|
+ skb_put(skb, desc->pkt_len);
|
|
+
|
|
+ debug_pkt(dev, "eth_poll", skb->data, skb->len);
|
|
+
|
|
+ skb->protocol = eth_type_trans(skb, dev);
|
|
+ dev->last_rx = jiffies;
|
|
+ port->stat.rx_packets++;
|
|
+ port->stat.rx_bytes += skb->len;
|
|
+ netif_receive_skb(skb);
|
|
+
|
|
+ /* put the new buffer on RX-free queue */
|
|
+#ifdef __ARMEB__
|
|
+ port->rx_buff_tab[n] = temp;
|
|
+ desc->data = phys;
|
|
+#endif
|
|
+ desc->buf_len = MAX_MRU;
|
|
+ desc->pkt_len = 0;
|
|
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
|
|
+ quota--;
|
|
+ received++;
|
|
+ }
|
|
+ dev->quota -= received;
|
|
+ *budget -= received;
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "eth_poll(): end, not all work done\n");
|
|
+#endif
|
|
+ return 1; /* not all work done */
|
|
+}
|
|
+
|
|
+
|
|
+static void eth_txdone_irq(void *unused)
|
|
+{
|
|
+ u32 phys;
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
|
|
+#endif
|
|
+ while ((phys = queue_get_entry(TXDONE_QUEUE)) != 0) {
|
|
+ u32 npe_id, n_desc;
|
|
+ struct port *port;
|
|
+ struct desc *desc;
|
|
+ int start;
|
|
+
|
|
+ npe_id = phys & 3;
|
|
+ BUG_ON(npe_id >= MAX_NPES);
|
|
+ port = npe_port_tab[npe_id];
|
|
+ BUG_ON(!port);
|
|
+ phys &= ~0x1F; /* mask out non-address bits */
|
|
+ n_desc = (phys - tx_desc_phys(port, 0)) / sizeof(struct desc);
|
|
+ BUG_ON(n_desc >= TX_DESCS);
|
|
+ desc = tx_desc_ptr(port, n_desc);
|
|
+ debug_desc(phys, desc);
|
|
+
|
|
+ if (port->tx_buff_tab[n_desc]) { /* not the draining packet */
|
|
+ port->stat.tx_packets++;
|
|
+ port->stat.tx_bytes += desc->pkt_len;
|
|
+
|
|
+ dma_unmap_tx(port, desc);
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
|
|
+ port->netdev->name, port->tx_buff_tab[n_desc]);
|
|
+#endif
|
|
+ free_buffer_irq(port->tx_buff_tab[n_desc]);
|
|
+ port->tx_buff_tab[n_desc] = NULL;
|
|
+ }
|
|
+
|
|
+ start = qmgr_stat_empty(port->plat->txreadyq);
|
|
+ queue_put_desc(port->plat->txreadyq, phys, desc);
|
|
+ if (start) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
|
|
+ port->netdev->name);
|
|
+#endif
|
|
+ netif_wake_queue(port->netdev);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+static int eth_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ unsigned int txreadyq = port->plat->txreadyq;
|
|
+ int len, offset, bytes, n;
|
|
+ void *mem;
|
|
+ u32 phys;
|
|
+ struct desc *desc;
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_xmit\n", dev->name);
|
|
+#endif
|
|
+
|
|
+ if (unlikely(skb->len > MAX_MRU)) {
|
|
+ dev_kfree_skb(skb);
|
|
+ port->stat.tx_errors++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+
|
|
+ debug_pkt(dev, "eth_xmit", skb->data, skb->len);
|
|
+
|
|
+ len = skb->len;
|
|
+#ifdef __ARMEB__
|
|
+ offset = 0; /* no need to keep alignment */
|
|
+ bytes = len;
|
|
+ mem = skb->data;
|
|
+#else
|
|
+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
|
|
+ bytes = ALIGN(offset + len, 4);
|
|
+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
|
|
+ dev_kfree_skb(skb);
|
|
+ port->stat.tx_dropped++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
|
|
+ dev_kfree_skb(skb);
|
|
+#endif
|
|
+
|
|
+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
|
|
+ if (dma_mapping_error(phys)) {
|
|
+#ifdef __ARMEB__
|
|
+ dev_kfree_skb(skb);
|
|
+#else
|
|
+ kfree(mem);
|
|
+#endif
|
|
+ port->stat.tx_dropped++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+
|
|
+ n = queue_get_desc(txreadyq, port, 1);
|
|
+ BUG_ON(n < 0);
|
|
+ desc = tx_desc_ptr(port, n);
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ port->tx_buff_tab[n] = skb;
|
|
+#else
|
|
+ port->tx_buff_tab[n] = mem;
|
|
+#endif
|
|
+ desc->data = phys + offset;
|
|
+ desc->buf_len = desc->pkt_len = len;
|
|
+
|
|
+ /* NPE firmware pads short frames with zeros internally */
|
|
+ wmb();
|
|
+ queue_put_desc(TX_QUEUE(port->id), tx_desc_phys(port, n), desc);
|
|
+ dev->trans_start = jiffies;
|
|
+
|
|
+ if (qmgr_stat_empty(txreadyq)) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_xmit queue full\n", dev->name);
|
|
+#endif
|
|
+ netif_stop_queue(dev);
|
|
+ /* we could miss TX ready interrupt */
|
|
+ if (!qmgr_stat_empty(txreadyq)) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_xmit ready again\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ netif_wake_queue(dev);
|
|
+ }
|
|
+ }
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: eth_xmit end\n", dev->name);
|
|
+#endif
|
|
+ return NETDEV_TX_OK;
|
|
+}
|
|
+
|
|
+
|
|
+static struct net_device_stats *eth_stats(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ return &port->stat;
|
|
+}
|
|
+
|
|
+static void eth_set_mcast_list(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ struct dev_mc_list *mclist = dev->mc_list;
|
|
+ u8 diffs[ETH_ALEN], *addr;
|
|
+ int cnt = dev->mc_count, i;
|
|
+
|
|
+ if ((dev->flags & IFF_PROMISC) || !mclist || !cnt) {
|
|
+ __raw_writel(DEFAULT_RX_CNTRL0 & ~RX_CNTRL0_ADDR_FLTR_EN,
|
|
+ &port->regs->rx_control[0]);
|
|
+ return;
|
|
+ }
|
|
+
|
|
+ memset(diffs, 0, ETH_ALEN);
|
|
+ addr = mclist->dmi_addr; /* first MAC address */
|
|
+
|
|
+ while (--cnt && (mclist = mclist->next))
|
|
+ for (i = 0; i < ETH_ALEN; i++)
|
|
+ diffs[i] |= addr[i] ^ mclist->dmi_addr[i];
|
|
+
|
|
+ for (i = 0; i < ETH_ALEN; i++) {
|
|
+ __raw_writel(addr[i], &port->regs->mcast_addr[i]);
|
|
+ __raw_writel(~diffs[i], &port->regs->mcast_mask[i]);
|
|
+ }
|
|
+
|
|
+ __raw_writel(DEFAULT_RX_CNTRL0 | RX_CNTRL0_ADDR_FLTR_EN,
|
|
+ &port->regs->rx_control[0]);
|
|
+}
|
|
+
|
|
+
|
|
+static int eth_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ unsigned int duplex_chg;
|
|
+ int err;
|
|
+
|
|
+ if (!netif_running(dev))
|
|
+ return -EINVAL;
|
|
+ err = generic_mii_ioctl(&port->mii, if_mii(req), cmd, &duplex_chg);
|
|
+ if (duplex_chg)
|
|
+ eth_set_duplex(port);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+
|
|
+static int request_queues(struct port *port)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ err = qmgr_request_queue(RXFREE_QUEUE(port->id), RX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ err = qmgr_request_queue(port->plat->rxq, RX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_rxfree;
|
|
+
|
|
+ err = qmgr_request_queue(TX_QUEUE(port->id), TX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_rx;
|
|
+
|
|
+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_tx;
|
|
+
|
|
+ /* TX-done queue handles skbs sent out by the NPEs */
|
|
+ if (!ports_open) {
|
|
+ err = qmgr_request_queue(TXDONE_QUEUE, TXDONE_QUEUE_LEN, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_txready;
|
|
+ }
|
|
+ return 0;
|
|
+
|
|
+rel_txready:
|
|
+ qmgr_release_queue(port->plat->txreadyq);
|
|
+rel_tx:
|
|
+ qmgr_release_queue(TX_QUEUE(port->id));
|
|
+rel_rx:
|
|
+ qmgr_release_queue(port->plat->rxq);
|
|
+rel_rxfree:
|
|
+ qmgr_release_queue(RXFREE_QUEUE(port->id));
|
|
+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
|
|
+ port->netdev->name);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void release_queues(struct port *port)
|
|
+{
|
|
+ qmgr_release_queue(RXFREE_QUEUE(port->id));
|
|
+ qmgr_release_queue(port->plat->rxq);
|
|
+ qmgr_release_queue(TX_QUEUE(port->id));
|
|
+ qmgr_release_queue(port->plat->txreadyq);
|
|
+
|
|
+ if (!ports_open)
|
|
+ qmgr_release_queue(TXDONE_QUEUE);
|
|
+}
|
|
+
|
|
+static int init_queues(struct port *port)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (!ports_open)
|
|
+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
|
|
+ POOL_ALLOC_SIZE, 32, 0)))
|
|
+ return -ENOMEM;
|
|
+
|
|
+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
|
|
+ &port->desc_tab_phys)))
|
|
+ return -ENOMEM;
|
|
+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
|
|
+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
|
|
+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
|
|
+
|
|
+ /* Setup RX buffers */
|
|
+ for (i = 0; i < RX_DESCS; i++) {
|
|
+ struct desc *desc = rx_desc_ptr(port, i);
|
|
+ buffer_t *buff;
|
|
+ void *data;
|
|
+#ifdef __ARMEB__
|
|
+ if (!(buff = netdev_alloc_skb(port->netdev, MAX_MRU)))
|
|
+ return -ENOMEM;
|
|
+ data = buff->data;
|
|
+#else
|
|
+ if (!(buff = kmalloc(MAX_MRU, GFP_KERNEL)))
|
|
+ return -ENOMEM;
|
|
+ data = buff;
|
|
+#endif
|
|
+ desc->buf_len = MAX_MRU;
|
|
+ desc->data = dma_map_single(&port->netdev->dev, data,
|
|
+ MAX_MRU, DMA_FROM_DEVICE);
|
|
+ if (dma_mapping_error(desc->data)) {
|
|
+ free_buffer(buff);
|
|
+ return -EIO;
|
|
+ }
|
|
+ port->rx_buff_tab[i] = buff;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void destroy_queues(struct port *port)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (port->desc_tab) {
|
|
+ for (i = 0; i < RX_DESCS; i++) {
|
|
+ struct desc *desc = rx_desc_ptr(port, i);
|
|
+ buffer_t *buff = port->rx_buff_tab[i];
|
|
+ if (buff) {
|
|
+ dma_unmap_single(&port->netdev->dev,
|
|
+ desc->data, MAX_MRU,
|
|
+ DMA_FROM_DEVICE);
|
|
+ free_buffer(buff);
|
|
+ }
|
|
+ }
|
|
+ for (i = 0; i < TX_DESCS; i++) {
|
|
+ struct desc *desc = tx_desc_ptr(port, i);
|
|
+ buffer_t *buff = port->tx_buff_tab[i];
|
|
+ if (buff) {
|
|
+ dma_unmap_tx(port, desc);
|
|
+ free_buffer(buff);
|
|
+ }
|
|
+ }
|
|
+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
|
|
+ port->desc_tab = NULL;
|
|
+ }
|
|
+
|
|
+ if (!ports_open && dma_pool) {
|
|
+ dma_pool_destroy(dma_pool);
|
|
+ dma_pool = NULL;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int eth_open(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ struct npe *npe = port->npe;
|
|
+ struct msg msg;
|
|
+ int i, err;
|
|
+
|
|
+ if (!npe_running(npe)) {
|
|
+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ if (npe_recv_message(npe, &msg, "ETH_GET_STATUS")) {
|
|
+ printk(KERN_ERR "%s: %s not responding\n", dev->name,
|
|
+ npe_name(npe));
|
|
+ return -EIO;
|
|
+ }
|
|
+ }
|
|
+
|
|
+ mdio_write(dev, port->plat->phy, MII_BMCR, port->mii_bmcr);
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = NPE_VLAN_SETRXQOSENTRY;
|
|
+ msg.eth_id = port->id;
|
|
+ msg.byte5 = port->plat->rxq | 0x80;
|
|
+ msg.byte7 = port->plat->rxq << 4;
|
|
+ for (i = 0; i < 8; i++) {
|
|
+ msg.byte3 = i;
|
|
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_RXQ"))
|
|
+ return -EIO;
|
|
+ }
|
|
+
|
|
+ msg.cmd = NPE_EDB_SETPORTADDRESS;
|
|
+ msg.eth_id = PHYSICAL_ID(port->id);
|
|
+ msg.byte2 = dev->dev_addr[0];
|
|
+ msg.byte3 = dev->dev_addr[1];
|
|
+ msg.byte4 = dev->dev_addr[2];
|
|
+ msg.byte5 = dev->dev_addr[3];
|
|
+ msg.byte6 = dev->dev_addr[4];
|
|
+ msg.byte7 = dev->dev_addr[5];
|
|
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAC"))
|
|
+ return -EIO;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = NPE_FW_SETFIREWALLMODE;
|
|
+ msg.eth_id = port->id;
|
|
+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
|
|
+ return -EIO;
|
|
+
|
|
+ if ((err = request_queues(port)) != 0)
|
|
+ return err;
|
|
+
|
|
+ if ((err = init_queues(port)) != 0) {
|
|
+ destroy_queues(port);
|
|
+ release_queues(port);
|
|
+ return err;
|
|
+ }
|
|
+
|
|
+ for (i = 0; i < ETH_ALEN; i++)
|
|
+ __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
|
|
+ __raw_writel(0x08, &port->regs->random_seed);
|
|
+ __raw_writel(0x12, &port->regs->partial_empty_threshold);
|
|
+ __raw_writel(0x30, &port->regs->partial_full_threshold);
|
|
+ __raw_writel(0x08, &port->regs->tx_start_bytes);
|
|
+ __raw_writel(0x15, &port->regs->tx_deferral);
|
|
+ __raw_writel(0x08, &port->regs->tx_2part_deferral[0]);
|
|
+ __raw_writel(0x07, &port->regs->tx_2part_deferral[1]);
|
|
+ __raw_writel(0x80, &port->regs->slot_time);
|
|
+ __raw_writel(0x01, &port->regs->int_clock_threshold);
|
|
+
|
|
+ /* Populate queues with buffers, no failure after this point */
|
|
+ for (i = 0; i < TX_DESCS; i++)
|
|
+ queue_put_desc(port->plat->txreadyq,
|
|
+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
|
|
+
|
|
+ for (i = 0; i < RX_DESCS; i++)
|
|
+ queue_put_desc(RXFREE_QUEUE(port->id),
|
|
+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
|
|
+
|
|
+ __raw_writel(TX_CNTRL1_RETRIES, &port->regs->tx_control[1]);
|
|
+ __raw_writel(DEFAULT_TX_CNTRL0, &port->regs->tx_control[0]);
|
|
+ __raw_writel(0, &port->regs->rx_control[1]);
|
|
+ __raw_writel(DEFAULT_RX_CNTRL0, &port->regs->rx_control[0]);
|
|
+
|
|
+ phy_check_media(port, 1);
|
|
+ eth_set_mcast_list(dev);
|
|
+ netif_start_queue(dev);
|
|
+ schedule_delayed_work(&port->mdio_thread, MDIO_INTERVAL);
|
|
+
|
|
+ qmgr_set_irq(port->plat->rxq, QUEUE_IRQ_SRC_NOT_EMPTY,
|
|
+ eth_rx_irq, dev);
|
|
+ if (!ports_open) {
|
|
+ qmgr_set_irq(TXDONE_QUEUE, QUEUE_IRQ_SRC_NOT_EMPTY,
|
|
+ eth_txdone_irq, NULL);
|
|
+ qmgr_enable_irq(TXDONE_QUEUE);
|
|
+ }
|
|
+ ports_open++;
|
|
+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int eth_close(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = netdev_priv(dev);
|
|
+ struct msg msg;
|
|
+ int buffs = RX_DESCS; /* allocated RX buffers */
|
|
+ int i;
|
|
+
|
|
+ ports_open--;
|
|
+ qmgr_disable_irq(port->plat->rxq);
|
|
+ netif_stop_queue(dev);
|
|
+
|
|
+ while (queue_get_desc(RXFREE_QUEUE(port->id), port, 0) >= 0)
|
|
+ buffs--;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = NPE_SETLOOPBACK_MODE;
|
|
+ msg.eth_id = port->id;
|
|
+ msg.byte3 = 1;
|
|
+ if (npe_send_recv_message(port->npe, &msg, "ETH_ENABLE_LOOPBACK"))
|
|
+ printk(KERN_CRIT "%s: unable to enable loopback\n", dev->name);
|
|
+
|
|
+ i = 0;
|
|
+ do { /* drain RX buffers */
|
|
+ while (queue_get_desc(port->plat->rxq, port, 0) >= 0)
|
|
+ buffs--;
|
|
+ if (!buffs)
|
|
+ break;
|
|
+ if (qmgr_stat_empty(TX_QUEUE(port->id))) {
|
|
+ /* we have to inject some packet */
|
|
+ struct desc *desc;
|
|
+ u32 phys;
|
|
+ int n = queue_get_desc(port->plat->txreadyq, port, 1);
|
|
+ BUG_ON(n < 0);
|
|
+ desc = tx_desc_ptr(port, n);
|
|
+ phys = tx_desc_phys(port, n);
|
|
+ desc->buf_len = desc->pkt_len = 1;
|
|
+ wmb();
|
|
+ queue_put_desc(TX_QUEUE(port->id), phys, desc);
|
|
+ }
|
|
+ udelay(1);
|
|
+ } while (++i < MAX_CLOSE_WAIT);
|
|
+
|
|
+ if (buffs)
|
|
+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
|
|
+ " left in NPE\n", dev->name, buffs);
|
|
+#if DEBUG_CLOSE
|
|
+ if (!buffs)
|
|
+ printk(KERN_DEBUG "Draining RX queue took %i cycles\n", i);
|
|
+#endif
|
|
+
|
|
+ buffs = TX_DESCS;
|
|
+ while (queue_get_desc(TX_QUEUE(port->id), port, 1) >= 0)
|
|
+ buffs--; /* cancel TX */
|
|
+
|
|
+ i = 0;
|
|
+ do {
|
|
+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
|
|
+ buffs--;
|
|
+ if (!buffs)
|
|
+ break;
|
|
+ } while (++i < MAX_CLOSE_WAIT);
|
|
+
|
|
+ if (buffs)
|
|
+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
|
|
+ "left in NPE\n", dev->name, buffs);
|
|
+#if DEBUG_CLOSE
|
|
+ if (!buffs)
|
|
+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
|
|
+#endif
|
|
+
|
|
+ msg.byte3 = 0;
|
|
+ if (npe_send_recv_message(port->npe, &msg, "ETH_DISABLE_LOOPBACK"))
|
|
+ printk(KERN_CRIT "%s: unable to disable loopback\n",
|
|
+ dev->name);
|
|
+
|
|
+ port->mii_bmcr = mdio_read(dev, port->plat->phy, MII_BMCR) &
|
|
+ ~(BMCR_RESET | BMCR_PDOWN); /* may have been altered */
|
|
+ mdio_write(dev, port->plat->phy, MII_BMCR,
|
|
+ port->mii_bmcr | BMCR_PDOWN);
|
|
+
|
|
+ if (!ports_open)
|
|
+ qmgr_disable_irq(TXDONE_QUEUE);
|
|
+ cancel_rearming_delayed_work(&port->mdio_thread);
|
|
+ destroy_queues(port);
|
|
+ release_queues(port);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int __devinit eth_init_one(struct platform_device *pdev)
|
|
+{
|
|
+ struct port *port;
|
|
+ struct net_device *dev;
|
|
+ struct eth_plat_info *plat = pdev->dev.platform_data;
|
|
+ u32 regs_phys;
|
|
+ int err;
|
|
+
|
|
+ if (!(dev = alloc_etherdev(sizeof(struct port))))
|
|
+ return -ENOMEM;
|
|
+
|
|
+ SET_MODULE_OWNER(dev);
|
|
+ SET_NETDEV_DEV(dev, &pdev->dev);
|
|
+ port = netdev_priv(dev);
|
|
+ port->netdev = dev;
|
|
+ port->id = pdev->id;
|
|
+
|
|
+ switch (port->id) {
|
|
+ case IXP4XX_ETH_NPEA:
|
|
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthA_BASE_VIRT;
|
|
+ regs_phys = IXP4XX_EthA_BASE_PHYS;
|
|
+ break;
|
|
+ case IXP4XX_ETH_NPEB:
|
|
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
|
|
+ regs_phys = IXP4XX_EthB_BASE_PHYS;
|
|
+ break;
|
|
+ case IXP4XX_ETH_NPEC:
|
|
+ port->regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
|
|
+ regs_phys = IXP4XX_EthC_BASE_PHYS;
|
|
+ break;
|
|
+ default:
|
|
+ err = -ENOSYS;
|
|
+ goto err_free;
|
|
+ }
|
|
+
|
|
+ dev->open = eth_open;
|
|
+ dev->hard_start_xmit = eth_xmit;
|
|
+ dev->poll = eth_poll;
|
|
+ dev->stop = eth_close;
|
|
+ dev->get_stats = eth_stats;
|
|
+ dev->do_ioctl = eth_ioctl;
|
|
+ dev->set_multicast_list = eth_set_mcast_list;
|
|
+ dev->weight = 16;
|
|
+ dev->tx_queue_len = 100;
|
|
+
|
|
+ if (!(port->npe = npe_request(NPE_ID(port->id)))) {
|
|
+ err = -EIO;
|
|
+ goto err_free;
|
|
+ }
|
|
+
|
|
+ if (register_netdev(dev)) {
|
|
+ err = -EIO;
|
|
+ goto err_npe_rel;
|
|
+ }
|
|
+
|
|
+ port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
|
|
+ if (!port->mem_res) {
|
|
+ err = -EBUSY;
|
|
+ goto err_unreg;
|
|
+ }
|
|
+
|
|
+ port->plat = plat;
|
|
+ npe_port_tab[NPE_ID(port->id)] = port;
|
|
+ memcpy(dev->dev_addr, plat->hwaddr, ETH_ALEN);
|
|
+
|
|
+ platform_set_drvdata(pdev, dev);
|
|
+
|
|
+ __raw_writel(DEFAULT_CORE_CNTRL | CORE_RESET,
|
|
+ &port->regs->core_control);
|
|
+ udelay(50);
|
|
+ __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
|
|
+ udelay(50);
|
|
+
|
|
+ port->mii.dev = dev;
|
|
+ port->mii.mdio_read = mdio_read;
|
|
+ port->mii.mdio_write = mdio_write;
|
|
+ port->mii.phy_id = plat->phy;
|
|
+ port->mii.phy_id_mask = 0x1F;
|
|
+ port->mii.reg_num_mask = 0x1F;
|
|
+
|
|
+ printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
|
|
+ npe_name(port->npe));
|
|
+
|
|
+ phy_reset(dev, plat->phy);
|
|
+ port->mii_bmcr = mdio_read(dev, plat->phy, MII_BMCR) &
|
|
+ ~(BMCR_RESET | BMCR_PDOWN);
|
|
+ mdio_write(dev, plat->phy, MII_BMCR, port->mii_bmcr | BMCR_PDOWN);
|
|
+
|
|
+ INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
|
|
+ return 0;
|
|
+
|
|
+err_unreg:
|
|
+ unregister_netdev(dev);
|
|
+err_npe_rel:
|
|
+ npe_release(port->npe);
|
|
+err_free:
|
|
+ free_netdev(dev);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int __devexit eth_remove_one(struct platform_device *pdev)
|
|
+{
|
|
+ struct net_device *dev = platform_get_drvdata(pdev);
|
|
+ struct port *port = netdev_priv(dev);
|
|
+
|
|
+ unregister_netdev(dev);
|
|
+ npe_port_tab[NPE_ID(port->id)] = NULL;
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ npe_release(port->npe);
|
|
+ release_resource(port->mem_res);
|
|
+ free_netdev(dev);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver drv = {
|
|
+ .driver.name = DRV_NAME,
|
|
+ .probe = eth_init_one,
|
|
+ .remove = eth_remove_one,
|
|
+};
|
|
+
|
|
+static int __init eth_init_module(void)
|
|
+{
|
|
+ if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
|
|
+ return -ENOSYS;
|
|
+
|
|
+ /* All MII PHY accesses use NPE-B Ethernet registers */
|
|
+ spin_lock_init(&mdio_lock);
|
|
+ mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
|
|
+ __raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
|
|
+
|
|
+ return platform_driver_register(&drv);
|
|
+}
|
|
+
|
|
+static void __exit eth_cleanup_module(void)
|
|
+{
|
|
+ platform_driver_unregister(&drv);
|
|
+}
|
|
+
|
|
+MODULE_AUTHOR("Krzysztof Halasa");
|
|
+MODULE_DESCRIPTION("Intel IXP4xx Ethernet driver");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+module_init(eth_init_module);
|
|
+module_exit(eth_cleanup_module);
|
|
Index: linux-2.6.23.17/drivers/net/wan/Kconfig
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/drivers/net/wan/Kconfig
|
|
+++ linux-2.6.23.17/drivers/net/wan/Kconfig
|
|
@@ -334,6 +334,15 @@ config DSCC4_PCI_RST
|
|
|
|
Say Y if your card supports this feature.
|
|
|
|
+config IXP4XX_HSS
|
|
+ tristate "IXP4xx HSS (synchronous serial port) support"
|
|
+ depends on HDLC && ARM && ARCH_IXP4XX
|
|
+ select IXP4XX_NPE
|
|
+ select IXP4XX_QMGR
|
|
+ help
|
|
+ Say Y here if you want to use built-in HSS ports
|
|
+ on IXP4xx processor.
|
|
+
|
|
config DLCI
|
|
tristate "Frame Relay DLCI support"
|
|
---help---
|
|
Index: linux-2.6.23.17/drivers/net/wan/Makefile
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/drivers/net/wan/Makefile
|
|
+++ linux-2.6.23.17/drivers/net/wan/Makefile
|
|
@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
|
|
obj-$(CONFIG_WANXL) += wanxl.o
|
|
obj-$(CONFIG_PCI200SYN) += pci200syn.o
|
|
obj-$(CONFIG_PC300TOO) += pc300too.o
|
|
+obj-$(CONFIG_IXP4XX_HSS) += ixp4xx_hss.o
|
|
|
|
clean-files := wanxlfw.inc
|
|
$(obj)/wanxl.o: $(obj)/wanxlfw.inc
|
|
Index: linux-2.6.23.17/drivers/net/wan/ixp4xx_hss.c
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/drivers/net/wan/ixp4xx_hss.c
|
|
@@ -0,0 +1,1270 @@
|
|
+/*
|
|
+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
|
|
+ *
|
|
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of version 2 of the GNU General Public License
|
|
+ * as published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#include <linux/dma-mapping.h>
|
|
+#include <linux/dmapool.h>
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+#include <linux/hdlc.h>
|
|
+#include <linux/platform_device.h>
|
|
+#include <asm/arch/npe.h>
|
|
+#include <asm/arch/qmgr.h>
|
|
+
|
|
+#define DEBUG_QUEUES 0
|
|
+#define DEBUG_DESC 0
|
|
+#define DEBUG_RX 0
|
|
+#define DEBUG_TX 0
|
|
+#define DEBUG_PKT_BYTES 0
|
|
+#define DEBUG_CLOSE 0
|
|
+
|
|
+#define DRV_NAME "ixp4xx_hss"
|
|
+
|
|
+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
|
|
+#define FRAME_SYNC_OFFSET 0 /* unused, channelized only */
|
|
+#define FRAME_SYNC_SIZE 1024
|
|
+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
|
|
+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
|
|
+
|
|
+#define RX_DESCS 16 /* also length of all RX queues */
|
|
+#define TX_DESCS 16 /* also length of all TX queues */
|
|
+
|
|
+#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
|
|
+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
|
|
+#define MAX_CLOSE_WAIT 1000 /* microseconds */
|
|
+
|
|
+/* Queue IDs */
|
|
+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
|
|
+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
|
|
+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
|
|
+#define HSS0_PKT_TX1_QUEUE 15
|
|
+#define HSS0_PKT_TX2_QUEUE 16
|
|
+#define HSS0_PKT_TX3_QUEUE 17
|
|
+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
|
|
+#define HSS0_PKT_RXFREE1_QUEUE 19
|
|
+#define HSS0_PKT_RXFREE2_QUEUE 20
|
|
+#define HSS0_PKT_RXFREE3_QUEUE 21
|
|
+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
|
|
+
|
|
+#define HSS1_CHL_RXTRIG_QUEUE 10
|
|
+#define HSS1_PKT_RX_QUEUE 0
|
|
+#define HSS1_PKT_TX0_QUEUE 5
|
|
+#define HSS1_PKT_TX1_QUEUE 6
|
|
+#define HSS1_PKT_TX2_QUEUE 7
|
|
+#define HSS1_PKT_TX3_QUEUE 8
|
|
+#define HSS1_PKT_RXFREE0_QUEUE 1
|
|
+#define HSS1_PKT_RXFREE1_QUEUE 2
|
|
+#define HSS1_PKT_RXFREE2_QUEUE 3
|
|
+#define HSS1_PKT_RXFREE3_QUEUE 4
|
|
+#define HSS1_PKT_TXDONE_QUEUE 9
|
|
+
|
|
+#define NPE_PKT_MODE_HDLC 0
|
|
+#define NPE_PKT_MODE_RAW 1
|
|
+#define NPE_PKT_MODE_56KMODE 2
|
|
+#define NPE_PKT_MODE_56KENDIAN_MSB 4
|
|
+
|
|
+/* PKT_PIPE_HDLC_CFG_WRITE flags */
|
|
+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
|
|
+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
|
|
+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
|
|
+
|
|
+
|
|
+/* hss_config, PCRs */
|
|
+/* Frame sync sampling, default = active low */
|
|
+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
|
|
+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
|
|
+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
|
|
+
|
|
+/* Frame sync pin: input (default) or output generated off a given clk edge */
|
|
+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
|
|
+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
|
|
+
|
|
+/* Frame and data clock sampling on edge, default = falling */
|
|
+#define PCR_FCLK_EDGE_RISING 0x08000000
|
|
+#define PCR_DCLK_EDGE_RISING 0x04000000
|
|
+
|
|
+/* Clock direction, default = input */
|
|
+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
|
|
+
|
|
+/* Generate/Receive frame pulses, default = enabled */
|
|
+#define PCR_FRM_PULSE_DISABLED 0x01000000
|
|
+
|
|
+ /* Data rate is full (default) or half the configured clk speed */
|
|
+#define PCR_HALF_CLK_RATE 0x00200000
|
|
+
|
|
+/* Invert data between NPE and HSS FIFOs? (default = no) */
|
|
+#define PCR_DATA_POLARITY_INVERT 0x00100000
|
|
+
|
|
+/* TX/RX endianness, default = LSB */
|
|
+#define PCR_MSB_ENDIAN 0x00080000
|
|
+
|
|
+/* Normal (default) / open drain mode (TX only) */
|
|
+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
|
|
+
|
|
+/* No framing bit transmitted and expected on RX? (default = framing bit) */
|
|
+#define PCR_SOF_NO_FBIT 0x00020000
|
|
+
|
|
+/* Drive data pins? */
|
|
+#define PCR_TX_DATA_ENABLE 0x00010000
|
|
+
|
|
+/* Voice 56k type: drive the data pins low (default), high, high Z */
|
|
+#define PCR_TX_V56K_HIGH 0x00002000
|
|
+#define PCR_TX_V56K_HIGH_IMP 0x00004000
|
|
+
|
|
+/* Unassigned type: drive the data pins low (default), high, high Z */
|
|
+#define PCR_TX_UNASS_HIGH 0x00000800
|
|
+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
|
|
+
|
|
+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
|
|
+#define PCR_TX_FB_HIGH_IMP 0x00000400
|
|
+
|
|
+/* 56k data endiannes - which bit unused: high (default) or low */
|
|
+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
|
|
+
|
|
+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
|
|
+#define PCR_TX_56KS_56K_DATA 0x00000100
|
|
+
|
|
+/* hss_config, cCR */
|
|
+/* Number of packetized clients, default = 1 */
|
|
+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
|
|
+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
|
|
+
|
|
+/* default = no loopback */
|
|
+#define CCR_LOOPBACK 0x02000000
|
|
+
|
|
+/* HSS number, default = 0 (first) */
|
|
+#define CCR_SECOND_HSS 0x01000000
|
|
+
|
|
+
|
|
+/* hss_config, clkCR: main:10, num:10, denom:12 */
|
|
+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
|
|
+
|
|
+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
|
|
+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
|
|
+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
|
|
+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
|
|
+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
|
|
+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
|
|
+
|
|
+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
|
|
+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
|
|
+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
|
|
+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
|
|
+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
|
|
+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
|
|
+
|
|
+
|
|
+/* hss_config, LUT entries */
|
|
+#define TDMMAP_UNASSIGNED 0
|
|
+#define TDMMAP_HDLC 1 /* HDLC - packetized */
|
|
+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
|
|
+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
|
|
+
|
|
+#define TIMESLOTS 128
|
|
+#define LUT_BITS 2
|
|
+
|
|
+/* offsets into HSS config */
|
|
+#define HSS_CONFIG_TX_PCR 0x00
|
|
+#define HSS_CONFIG_RX_PCR 0x04
|
|
+#define HSS_CONFIG_CORE_CR 0x08
|
|
+#define HSS_CONFIG_CLOCK_CR 0x0C
|
|
+#define HSS_CONFIG_TX_FCR 0x10
|
|
+#define HSS_CONFIG_RX_FCR 0x14
|
|
+#define HSS_CONFIG_TX_LUT 0x18
|
|
+#define HSS_CONFIG_RX_LUT 0x38
|
|
+
|
|
+
|
|
+/* NPE command codes */
|
|
+/* writes the ConfigWord value to the location specified by offset */
|
|
+#define PORT_CONFIG_WRITE 0x40
|
|
+
|
|
+/* triggers the NPE to load the contents of the configuration table */
|
|
+#define PORT_CONFIG_LOAD 0x41
|
|
+
|
|
+/* triggers the NPE to return an HssErrorReadResponse message */
|
|
+#define PORT_ERROR_READ 0x42
|
|
+
|
|
+/* reset NPE internal status and enable the HssChannelized operation */
|
|
+#define CHAN_FLOW_ENABLE 0x43
|
|
+#define CHAN_FLOW_DISABLE 0x44
|
|
+#define CHAN_IDLE_PATTERN_WRITE 0x45
|
|
+#define CHAN_NUM_CHANS_WRITE 0x46
|
|
+#define CHAN_RX_BUF_ADDR_WRITE 0x47
|
|
+#define CHAN_RX_BUF_CFG_WRITE 0x48
|
|
+#define CHAN_TX_BLK_CFG_WRITE 0x49
|
|
+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
|
|
+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
|
|
+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
|
|
+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
|
|
+
|
|
+/* downloads the gainWord value for a timeslot switching channel associated
|
|
+ with bypassNum */
|
|
+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
|
|
+
|
|
+/* triggers the NPE to reset internal status and enable the HssPacketized
|
|
+ operation for the flow specified by pPipe */
|
|
+#define PKT_PIPE_FLOW_ENABLE 0x50
|
|
+#define PKT_PIPE_FLOW_DISABLE 0x51
|
|
+#define PKT_NUM_PIPES_WRITE 0x52
|
|
+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
|
|
+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
|
|
+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
|
|
+#define PKT_PIPE_RX_SIZE_WRITE 0x56
|
|
+#define PKT_PIPE_MODE_WRITE 0x57
|
|
+
|
|
+/* HDLC packet status values - desc->status */
|
|
+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
|
|
+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
|
|
+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
|
|
+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
|
|
+ this packet (if buf_len < pkt_len) */
|
|
+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
|
|
+#define ERR_HDLC_ABORT 6 /* abort sequence received */
|
|
+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
|
|
+
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+typedef struct sk_buff buffer_t;
|
|
+#define free_buffer dev_kfree_skb
|
|
+#define free_buffer_irq dev_kfree_skb_irq
|
|
+#else
|
|
+typedef void buffer_t;
|
|
+#define free_buffer kfree
|
|
+#define free_buffer_irq kfree
|
|
+#endif
|
|
+
|
|
+struct port {
|
|
+ struct npe *npe;
|
|
+ struct net_device *netdev;
|
|
+ struct hss_plat_info *plat;
|
|
+ buffer_t *rx_buff_tab[RX_DESCS], *tx_buff_tab[TX_DESCS];
|
|
+ struct desc *desc_tab; /* coherent */
|
|
+ u32 desc_tab_phys;
|
|
+ int id;
|
|
+ unsigned int clock_type, clock_rate, loopback;
|
|
+ u8 hdlc_cfg;
|
|
+};
|
|
+
|
|
+/* NPE message structure */
|
|
+struct msg {
|
|
+#ifdef __ARMEB__
|
|
+ u8 cmd, unused, hss_port, index;
|
|
+ union {
|
|
+ struct { u8 data8a, data8b, data8c, data8d; };
|
|
+ struct { u16 data16a, data16b; };
|
|
+ struct { u32 data32; };
|
|
+ };
|
|
+#else
|
|
+ u8 index, hss_port, unused, cmd;
|
|
+ union {
|
|
+ struct { u8 data8d, data8c, data8b, data8a; };
|
|
+ struct { u16 data16b, data16a; };
|
|
+ struct { u32 data32; };
|
|
+ };
|
|
+#endif
|
|
+};
|
|
+
|
|
+/* HDLC packet descriptor */
|
|
+struct desc {
|
|
+ u32 next; /* pointer to next buffer, unused */
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ u16 buf_len; /* buffer length */
|
|
+ u16 pkt_len; /* packet length */
|
|
+ u32 data; /* pointer to data buffer in RAM */
|
|
+ u8 status;
|
|
+ u8 error_count;
|
|
+ u16 __reserved;
|
|
+#else
|
|
+ u16 pkt_len; /* packet length */
|
|
+ u16 buf_len; /* buffer length */
|
|
+ u32 data; /* pointer to data buffer in RAM */
|
|
+ u16 __reserved;
|
|
+ u8 error_count;
|
|
+ u8 status;
|
|
+#endif
|
|
+ u32 __reserved1[4];
|
|
+};
|
|
+
|
|
+
|
|
+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
|
|
+ (n) * sizeof(struct desc))
|
|
+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
|
|
+
|
|
+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
|
|
+ ((n) + RX_DESCS) * sizeof(struct desc))
|
|
+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
|
|
+
|
|
+/*****************************************************************************
|
|
+ * global variables
|
|
+ ****************************************************************************/
|
|
+
|
|
+static int ports_open;
|
|
+static struct dma_pool *dma_pool;
|
|
+
|
|
+static const struct {
|
|
+ int tx, txdone, rx, rxfree;
|
|
+}queue_ids[2] = {{ HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE,
|
|
+ HSS0_PKT_RX_QUEUE, HSS0_PKT_RXFREE0_QUEUE },
|
|
+ { HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE,
|
|
+ HSS1_PKT_RX_QUEUE, HSS1_PKT_RXFREE0_QUEUE },
|
|
+};
|
|
+
|
|
+/*****************************************************************************
|
|
+ * utility functions
|
|
+ ****************************************************************************/
|
|
+
|
|
+static inline struct port* dev_to_port(struct net_device *dev)
|
|
+{
|
|
+ return dev_to_hdlc(dev)->priv;
|
|
+}
|
|
+
|
|
+#ifndef __ARMEB__
|
|
+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
|
|
+{
|
|
+ int i;
|
|
+ for (i = 0; i < cnt; i++)
|
|
+ dest[i] = swab32(src[i]);
|
|
+}
|
|
+#endif
|
|
+
|
|
+static inline void debug_pkt(struct net_device *dev, const char *func,
|
|
+ u8 *data, int len)
|
|
+{
|
|
+#if DEBUG_PKT_BYTES
|
|
+ int i;
|
|
+
|
|
+ printk(KERN_DEBUG "%s: %s(%i) ", dev->name, func, len);
|
|
+ for (i = 0; i < len; i++) {
|
|
+ if (i >= DEBUG_PKT_BYTES)
|
|
+ break;
|
|
+ printk("%s%02X", !(i % 4) ? " " : "", data[i]);
|
|
+ }
|
|
+ printk("\n");
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+static inline void debug_desc(u32 phys, struct desc *desc)
|
|
+{
|
|
+#if DEBUG_DESC
|
|
+ printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
|
|
+ phys, desc->next, desc->buf_len, desc->pkt_len,
|
|
+ desc->data, desc->status, desc->error_count);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static inline void debug_queue(unsigned int queue, int is_get, u32 phys)
|
|
+{
|
|
+#if DEBUG_QUEUES
|
|
+ static struct {
|
|
+ int queue;
|
|
+ char *name;
|
|
+ } names[] = {
|
|
+ { HSS0_PKT_TX0_QUEUE, "TX#0 " },
|
|
+ { HSS0_PKT_TXDONE_QUEUE, "TX-done#0 " },
|
|
+ { HSS0_PKT_RX_QUEUE, "RX#0 " },
|
|
+ { HSS0_PKT_RXFREE0_QUEUE, "RX-free#0 " },
|
|
+ { HSS1_PKT_TX0_QUEUE, "TX#1 " },
|
|
+ { HSS1_PKT_TXDONE_QUEUE, "TX-done#1 " },
|
|
+ { HSS1_PKT_RX_QUEUE, "RX#1 " },
|
|
+ { HSS1_PKT_RXFREE0_QUEUE, "RX-free#1 " },
|
|
+ };
|
|
+ int i;
|
|
+
|
|
+ for (i = 0; i < ARRAY_SIZE(names); i++)
|
|
+ if (names[i].queue == queue)
|
|
+ break;
|
|
+
|
|
+ printk(KERN_DEBUG "Queue %i %s%s %X\n", queue,
|
|
+ i < ARRAY_SIZE(names) ? names[i].name : "",
|
|
+ is_get ? "->" : "<-", phys);
|
|
+#endif
|
|
+}
|
|
+
|
|
+static inline u32 queue_get_entry(unsigned int queue)
|
|
+{
|
|
+ u32 phys = qmgr_get_entry(queue);
|
|
+ debug_queue(queue, 1, phys);
|
|
+ return phys;
|
|
+}
|
|
+
|
|
+static inline int queue_get_desc(unsigned int queue, struct port *port,
|
|
+ int is_tx)
|
|
+{
|
|
+ u32 phys, tab_phys, n_desc;
|
|
+ struct desc *tab;
|
|
+
|
|
+ if (!(phys = queue_get_entry(queue)))
|
|
+ return -1;
|
|
+
|
|
+ BUG_ON(phys & 0x1F);
|
|
+ tab_phys = is_tx ? tx_desc_phys(port, 0) : rx_desc_phys(port, 0);
|
|
+ tab = is_tx ? tx_desc_ptr(port, 0) : rx_desc_ptr(port, 0);
|
|
+ n_desc = (phys - tab_phys) / sizeof(struct desc);
|
|
+ BUG_ON(n_desc >= (is_tx ? TX_DESCS : RX_DESCS));
|
|
+ debug_desc(phys, &tab[n_desc]);
|
|
+ BUG_ON(tab[n_desc].next);
|
|
+ return n_desc;
|
|
+}
|
|
+
|
|
+static inline void queue_put_desc(unsigned int queue, u32 phys,
|
|
+ struct desc *desc)
|
|
+{
|
|
+ debug_queue(queue, 0, phys);
|
|
+ debug_desc(phys, desc);
|
|
+ BUG_ON(phys & 0x1F);
|
|
+ qmgr_put_entry(queue, phys);
|
|
+ BUG_ON(qmgr_stat_overflow(queue));
|
|
+}
|
|
+
|
|
+
|
|
+static inline void dma_unmap_tx(struct port *port, struct desc *desc)
|
|
+{
|
|
+#ifdef __ARMEB__
|
|
+ dma_unmap_single(&port->netdev->dev, desc->data,
|
|
+ desc->buf_len, DMA_TO_DEVICE);
|
|
+#else
|
|
+ dma_unmap_single(&port->netdev->dev, desc->data & ~3,
|
|
+ ALIGN((desc->data & 3) + desc->buf_len, 4),
|
|
+ DMA_TO_DEVICE);
|
|
+#endif
|
|
+}
|
|
+
|
|
+
|
|
+static void hss_hdlc_set_carrier(void *pdev, int carrier)
|
|
+{
|
|
+ struct net_device *dev = pdev;
|
|
+ if (carrier)
|
|
+ netif_carrier_on(dev);
|
|
+ else
|
|
+ netif_carrier_off(dev);
|
|
+}
|
|
+
|
|
+static void hss_hdlc_rx_irq(void *pdev)
|
|
+{
|
|
+ struct net_device *dev = pdev;
|
|
+ struct port *port = dev_to_port(dev);
|
|
+
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
|
|
+#endif
|
|
+ qmgr_disable_irq(queue_ids[port->id].rx);
|
|
+ netif_rx_schedule(dev);
|
|
+}
|
|
+
|
|
+static int hss_hdlc_poll(struct net_device *dev, int *budget)
|
|
+{
|
|
+ struct port *port = dev_to_port(dev);
|
|
+ unsigned int rxq = queue_ids[port->id].rx;
|
|
+ unsigned int rxfreeq = queue_ids[port->id].rxfree;
|
|
+ struct net_device_stats *stats = hdlc_stats(dev);
|
|
+ int quota = dev->quota, received = 0;
|
|
+
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
|
|
+#endif
|
|
+
|
|
+ while (quota) {
|
|
+ struct sk_buff *skb;
|
|
+ struct desc *desc;
|
|
+ int n;
|
|
+#ifdef __ARMEB__
|
|
+ struct sk_buff *temp;
|
|
+ u32 phys;
|
|
+#endif
|
|
+
|
|
+ if ((n = queue_get_desc(rxq, port, 0)) < 0) {
|
|
+ dev->quota -= received; /* No packet received */
|
|
+ *budget -= received;
|
|
+ received = 0;
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
|
|
+ " netif_rx_complete\n", dev->name);
|
|
+#endif
|
|
+ netif_rx_complete(dev);
|
|
+ qmgr_enable_irq(rxq);
|
|
+ if (!qmgr_stat_empty(rxq) &&
|
|
+ netif_rx_reschedule(dev, 0)) {
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_poll"
|
|
+ " netif_rx_reschedule successed\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ qmgr_disable_irq(rxq);
|
|
+ continue;
|
|
+ }
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ return 0; /* all work done */
|
|
+ }
|
|
+
|
|
+ desc = rx_desc_ptr(port, n);
|
|
+
|
|
+ if (desc->error_count) /* FIXME - remove printk */
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
|
|
+ " errors %u\n", dev->name, desc->status,
|
|
+ desc->error_count);
|
|
+
|
|
+ skb = NULL;
|
|
+ switch (desc->status) {
|
|
+ case 0:
|
|
+#ifdef __ARMEB__
|
|
+ if ((skb = netdev_alloc_skb(dev, RX_SIZE)) != NULL) {
|
|
+ phys = dma_map_single(&dev->dev, skb->data,
|
|
+ RX_SIZE,
|
|
+ DMA_FROM_DEVICE);
|
|
+ if (dma_mapping_error(phys)) {
|
|
+ dev_kfree_skb(skb);
|
|
+ skb = NULL;
|
|
+ }
|
|
+ }
|
|
+#else
|
|
+ skb = netdev_alloc_skb(dev, desc->pkt_len);
|
|
+#endif
|
|
+ if (!skb)
|
|
+ stats->rx_dropped++;
|
|
+ break;
|
|
+ case ERR_HDLC_ALIGN:
|
|
+ case ERR_HDLC_ABORT:
|
|
+ stats->rx_frame_errors++;
|
|
+ stats->rx_errors++;
|
|
+ break;
|
|
+ case ERR_HDLC_FCS:
|
|
+ stats->rx_crc_errors++;
|
|
+ stats->rx_errors++;
|
|
+ break;
|
|
+ case ERR_HDLC_TOO_LONG:
|
|
+ stats->rx_length_errors++;
|
|
+ stats->rx_errors++;
|
|
+ break;
|
|
+ default: /* FIXME - remove printk */
|
|
+ printk(KERN_ERR "%s: hss_hdlc_poll: status 0x%02X"
|
|
+ " errors %u\n", dev->name, desc->status,
|
|
+ desc->error_count);
|
|
+ stats->rx_errors++;
|
|
+ }
|
|
+
|
|
+ if (!skb) {
|
|
+ /* put the desc back on RX-ready queue */
|
|
+ desc->buf_len = RX_SIZE;
|
|
+ desc->pkt_len = desc->status = 0;
|
|
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
|
|
+ continue;
|
|
+ }
|
|
+
|
|
+ /* process received frame */
|
|
+#ifdef __ARMEB__
|
|
+ temp = skb;
|
|
+ skb = port->rx_buff_tab[n];
|
|
+ dma_unmap_single(&dev->dev, desc->data,
|
|
+ RX_SIZE, DMA_FROM_DEVICE);
|
|
+#else
|
|
+ dma_sync_single(&dev->dev, desc->data,
|
|
+ RX_SIZE, DMA_FROM_DEVICE);
|
|
+ memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
|
|
+ ALIGN(desc->pkt_len, 4) / 4);
|
|
+#endif
|
|
+ skb_put(skb, desc->pkt_len);
|
|
+
|
|
+ debug_pkt(dev, "hss_hdlc_poll", skb->data, skb->len);
|
|
+
|
|
+ skb->protocol = hdlc_type_trans(skb, dev);
|
|
+ dev->last_rx = jiffies;
|
|
+ stats->rx_packets++;
|
|
+ stats->rx_bytes += skb->len;
|
|
+ netif_receive_skb(skb);
|
|
+
|
|
+ /* put the new buffer on RX-free queue */
|
|
+#ifdef __ARMEB__
|
|
+ port->rx_buff_tab[n] = temp;
|
|
+ desc->data = phys;
|
|
+#endif
|
|
+ desc->buf_len = RX_SIZE;
|
|
+ desc->pkt_len = 0;
|
|
+ queue_put_desc(rxfreeq, rx_desc_phys(port, n), desc);
|
|
+ quota--;
|
|
+ received++;
|
|
+ }
|
|
+ dev->quota -= received;
|
|
+ *budget -= received;
|
|
+#if DEBUG_RX
|
|
+ printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
|
|
+#endif
|
|
+ return 1; /* not all work done */
|
|
+}
|
|
+
|
|
+
|
|
+static void hss_hdlc_txdone_irq(void *pdev)
|
|
+{
|
|
+ struct net_device *dev = pdev;
|
|
+ struct port *port = dev_to_port(dev);
|
|
+ struct net_device_stats *stats = hdlc_stats(dev);
|
|
+ int n_desc;
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
|
|
+#endif
|
|
+ while ((n_desc = queue_get_desc(queue_ids[port->id].txdone,
|
|
+ port, 1)) >= 0) {
|
|
+ struct desc *desc;
|
|
+ int start;
|
|
+
|
|
+ desc = tx_desc_ptr(port, n_desc);
|
|
+
|
|
+ stats->tx_packets++;
|
|
+ stats->tx_bytes += desc->pkt_len;
|
|
+
|
|
+ dma_unmap_tx(port, desc);
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
|
|
+ port->netdev->name, port->tx_buff_tab[n_desc]);
|
|
+#endif
|
|
+ free_buffer_irq(port->tx_buff_tab[n_desc]);
|
|
+ port->tx_buff_tab[n_desc] = NULL;
|
|
+
|
|
+ start = qmgr_stat_empty(port->plat->txreadyq);
|
|
+ queue_put_desc(port->plat->txreadyq,
|
|
+ tx_desc_phys(port, n_desc), desc);
|
|
+ if (start) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
|
|
+ " ready\n", port->netdev->name);
|
|
+#endif
|
|
+ netif_wake_queue(port->netdev);
|
|
+ }
|
|
+ }
|
|
+}
|
|
+
|
|
+static int hss_hdlc_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
+{
|
|
+ struct port *port = dev_to_port(dev);
|
|
+ struct net_device_stats *stats = hdlc_stats(dev);
|
|
+ unsigned int txreadyq = port->plat->txreadyq;
|
|
+ int len, offset, bytes, n;
|
|
+ void *mem;
|
|
+ u32 phys;
|
|
+ struct desc *desc;
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
|
|
+#endif
|
|
+
|
|
+ if (unlikely(skb->len > HDLC_MAX_MRU)) {
|
|
+ dev_kfree_skb(skb);
|
|
+ stats->tx_errors++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+
|
|
+ debug_pkt(dev, "hss_hdlc_xmit", skb->data, skb->len);
|
|
+
|
|
+ len = skb->len;
|
|
+#ifdef __ARMEB__
|
|
+ offset = 0; /* no need to keep alignment */
|
|
+ bytes = len;
|
|
+ mem = skb->data;
|
|
+#else
|
|
+ offset = (int)skb->data & 3; /* keep 32-bit alignment */
|
|
+ bytes = ALIGN(offset + len, 4);
|
|
+ if (!(mem = kmalloc(bytes, GFP_ATOMIC))) {
|
|
+ dev_kfree_skb(skb);
|
|
+ stats->tx_dropped++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+ memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
|
|
+ dev_kfree_skb(skb);
|
|
+#endif
|
|
+
|
|
+ phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
|
|
+ if (dma_mapping_error(phys)) {
|
|
+#ifdef __ARMEB__
|
|
+ dev_kfree_skb(skb);
|
|
+#else
|
|
+ kfree(mem);
|
|
+#endif
|
|
+ stats->tx_dropped++;
|
|
+ return NETDEV_TX_OK;
|
|
+ }
|
|
+
|
|
+ n = queue_get_desc(txreadyq, port, 1);
|
|
+ BUG_ON(n < 0);
|
|
+ desc = tx_desc_ptr(port, n);
|
|
+
|
|
+#ifdef __ARMEB__
|
|
+ port->tx_buff_tab[n] = skb;
|
|
+#else
|
|
+ port->tx_buff_tab[n] = mem;
|
|
+#endif
|
|
+ desc->data = phys + offset;
|
|
+ desc->buf_len = desc->pkt_len = len;
|
|
+
|
|
+ wmb();
|
|
+ queue_put_desc(queue_ids[port->id].tx, tx_desc_phys(port, n), desc);
|
|
+ dev->trans_start = jiffies;
|
|
+
|
|
+ if (qmgr_stat_empty(txreadyq)) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
|
|
+#endif
|
|
+ netif_stop_queue(dev);
|
|
+ /* we could miss TX ready interrupt */
|
|
+ if (!qmgr_stat_empty(txreadyq)) {
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
|
|
+ dev->name);
|
|
+#endif
|
|
+ netif_wake_queue(dev);
|
|
+ }
|
|
+ }
|
|
+
|
|
+#if DEBUG_TX
|
|
+ printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
|
|
+#endif
|
|
+ return NETDEV_TX_OK;
|
|
+}
|
|
+
|
|
+
|
|
+static int request_hdlc_queues(struct port *port)
|
|
+{
|
|
+ int err;
|
|
+
|
|
+ err = qmgr_request_queue(queue_ids[port->id].rxfree, RX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ return err;
|
|
+
|
|
+ err = qmgr_request_queue(queue_ids[port->id].rx, RX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_rxfree;
|
|
+
|
|
+ err = qmgr_request_queue(queue_ids[port->id].tx, TX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_rx;
|
|
+
|
|
+ err = qmgr_request_queue(port->plat->txreadyq, TX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_tx;
|
|
+
|
|
+ err = qmgr_request_queue(queue_ids[port->id].txdone, TX_DESCS, 0, 0);
|
|
+ if (err)
|
|
+ goto rel_txready;
|
|
+ return 0;
|
|
+
|
|
+rel_txready:
|
|
+ qmgr_release_queue(port->plat->txreadyq);
|
|
+rel_tx:
|
|
+ qmgr_release_queue(queue_ids[port->id].tx);
|
|
+rel_rx:
|
|
+ qmgr_release_queue(queue_ids[port->id].rx);
|
|
+rel_rxfree:
|
|
+ qmgr_release_queue(queue_ids[port->id].rxfree);
|
|
+ printk(KERN_DEBUG "%s: unable to request hardware queues\n",
|
|
+ port->netdev->name);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static void release_hdlc_queues(struct port *port)
|
|
+{
|
|
+ qmgr_release_queue(queue_ids[port->id].rxfree);
|
|
+ qmgr_release_queue(queue_ids[port->id].rx);
|
|
+ qmgr_release_queue(queue_ids[port->id].txdone);
|
|
+ qmgr_release_queue(queue_ids[port->id].tx);
|
|
+ qmgr_release_queue(port->plat->txreadyq);
|
|
+}
|
|
+
|
|
+static int init_hdlc_queues(struct port *port)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (!ports_open)
|
|
+ if (!(dma_pool = dma_pool_create(DRV_NAME, NULL,
|
|
+ POOL_ALLOC_SIZE, 32, 0)))
|
|
+ return -ENOMEM;
|
|
+
|
|
+ if (!(port->desc_tab = dma_pool_alloc(dma_pool, GFP_KERNEL,
|
|
+ &port->desc_tab_phys)))
|
|
+ return -ENOMEM;
|
|
+ memset(port->desc_tab, 0, POOL_ALLOC_SIZE);
|
|
+ memset(port->rx_buff_tab, 0, sizeof(port->rx_buff_tab)); /* tables */
|
|
+ memset(port->tx_buff_tab, 0, sizeof(port->tx_buff_tab));
|
|
+
|
|
+ /* Setup RX buffers */
|
|
+ for (i = 0; i < RX_DESCS; i++) {
|
|
+ struct desc *desc = rx_desc_ptr(port, i);
|
|
+ buffer_t *buff;
|
|
+ void *data;
|
|
+#ifdef __ARMEB__
|
|
+ if (!(buff = netdev_alloc_skb(port->netdev, RX_SIZE)))
|
|
+ return -ENOMEM;
|
|
+ data = buff->data;
|
|
+#else
|
|
+ if (!(buff = kmalloc(RX_SIZE, GFP_KERNEL)))
|
|
+ return -ENOMEM;
|
|
+ data = buff;
|
|
+#endif
|
|
+ desc->buf_len = RX_SIZE;
|
|
+ desc->data = dma_map_single(&port->netdev->dev, data,
|
|
+ RX_SIZE, DMA_FROM_DEVICE);
|
|
+ if (dma_mapping_error(desc->data)) {
|
|
+ free_buffer(buff);
|
|
+ return -EIO;
|
|
+ }
|
|
+ port->rx_buff_tab[i] = buff;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static void destroy_hdlc_queues(struct port *port)
|
|
+{
|
|
+ int i;
|
|
+
|
|
+ if (port->desc_tab) {
|
|
+ for (i = 0; i < RX_DESCS; i++) {
|
|
+ struct desc *desc = rx_desc_ptr(port, i);
|
|
+ buffer_t *buff = port->rx_buff_tab[i];
|
|
+ if (buff) {
|
|
+ dma_unmap_single(&port->netdev->dev,
|
|
+ desc->data, RX_SIZE,
|
|
+ DMA_FROM_DEVICE);
|
|
+ free_buffer(buff);
|
|
+ }
|
|
+ }
|
|
+ for (i = 0; i < TX_DESCS; i++) {
|
|
+ struct desc *desc = tx_desc_ptr(port, i);
|
|
+ buffer_t *buff = port->tx_buff_tab[i];
|
|
+ if (buff) {
|
|
+ dma_unmap_tx(port, desc);
|
|
+ free_buffer(buff);
|
|
+ }
|
|
+ }
|
|
+ dma_pool_free(dma_pool, port->desc_tab, port->desc_tab_phys);
|
|
+ port->desc_tab = NULL;
|
|
+ }
|
|
+
|
|
+ if (!ports_open && dma_pool) {
|
|
+ dma_pool_destroy(dma_pool);
|
|
+ dma_pool = NULL;
|
|
+ }
|
|
+}
|
|
+
|
|
+static int hss_hdlc_open(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = dev_to_port(dev);
|
|
+ struct npe *npe = port->npe;
|
|
+ struct msg msg;
|
|
+ int i, err;
|
|
+
|
|
+ if (!npe_running(npe)) {
|
|
+ err = npe_load_firmware(npe, npe_name(npe), &dev->dev);
|
|
+ if (err)
|
|
+ return err;
|
|
+ }
|
|
+
|
|
+ if ((err = hdlc_open(dev)) != 0)
|
|
+ return err;
|
|
+
|
|
+ if (port->plat->open)
|
|
+ if ((err = port->plat->open(port->id, port->netdev,
|
|
+ hss_hdlc_set_carrier)) != 0)
|
|
+ goto err_hdlc_close;
|
|
+
|
|
+ /* HSS main configuration */
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PORT_CONFIG_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.index = 0; /* offset in HSS config */
|
|
+
|
|
+ msg.data32 = PCR_FRM_PULSE_DISABLED |
|
|
+ PCR_SOF_NO_FBIT |
|
|
+ PCR_MSB_ENDIAN |
|
|
+ PCR_TX_DATA_ENABLE;
|
|
+
|
|
+ if (port->clock_type == CLOCK_INT)
|
|
+ msg.data32 |= PCR_SYNC_CLK_DIR_OUTPUT;
|
|
+
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_PCR") != 0))
|
|
+ goto err_plat_close; /* 0: TX PCR */
|
|
+
|
|
+ msg.index = 4;
|
|
+ msg.data32 ^= PCR_TX_DATA_ENABLE | PCR_DCLK_EDGE_RISING;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_PCR") != 0))
|
|
+ goto err_plat_close; /* 4: RX PCR */
|
|
+
|
|
+ msg.index = 8;
|
|
+ msg.data32 = (port->loopback ? CCR_LOOPBACK : 0) |
|
|
+ (port->id ? CCR_SECOND_HSS : 0);
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CORE_CR") != 0))
|
|
+ goto err_plat_close; /* 8: Core CR */
|
|
+
|
|
+ msg.index = 12;
|
|
+ msg.data32 = CLK42X_SPEED_2048KHZ /* FIXME */;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_CLK_CR") != 0))
|
|
+ goto err_plat_close; /* 12: CLK CR */
|
|
+
|
|
+ msg.data32 = (FRAME_SYNC_OFFSET << 16) | (FRAME_SYNC_SIZE - 1);
|
|
+ msg.index = 16;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_TX_FCR") != 0))
|
|
+ goto err_plat_close; /* 16: TX FCR */
|
|
+
|
|
+ msg.index = 20;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_RX_FCR") != 0))
|
|
+ goto err_plat_close; /* 20: RX FCR */
|
|
+
|
|
+ msg.data32 = 0; /* Fill LUT with HDLC timeslots */
|
|
+ for (i = 0; i < 32 / LUT_BITS; i++)
|
|
+ msg.data32 |= TDMMAP_HDLC << (LUT_BITS * i);
|
|
+
|
|
+ for (i = 0; i < 2 /* TX and RX */ * TIMESLOTS * LUT_BITS / 8; i += 4) {
|
|
+ msg.index = 24 + i; /* 24 - 55: TX LUT, 56 - 87: RX LUT */
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_LUT") != 0))
|
|
+ goto err_plat_close;
|
|
+ }
|
|
+
|
|
+ /* HDLC mode configuration */
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_NUM_PIPES_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data8a = PKT_NUM_PIPES;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_PIPES") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_FIFO_SIZEW_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data8a = PKT_PIPE_FIFO_SIZEW;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_FIFO") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_IDLE_PATTERN_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data32 = 0x7F7F7F7F;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_IDLE") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PORT_CONFIG_LOAD;
|
|
+ msg.hss_port = port->id;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
|
|
+ goto err_plat_close;
|
|
+ if ((err = npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
|
|
+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32) {
|
|
+ printk(KERN_DEBUG "%s: unexpected message received in"
|
|
+ " response to HSS_LOAD_CONFIG\n", npe_name(npe));
|
|
+ err = EIO;
|
|
+ goto err_plat_close;
|
|
+ }
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_HDLC_CFG_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data8a = port->hdlc_cfg; /* rx_cfg */
|
|
+ msg.data8b = port->hdlc_cfg | (PKT_EXTRA_FLAGS << 3); /* tx_cfg */
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_HDLC_CFG") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_MODE_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data8a = NPE_PKT_MODE_HDLC;
|
|
+ /* msg.data8b = inv_mask */
|
|
+ /* msg.data8c = or_mask */
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_MODE") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_RX_SIZE_WRITE;
|
|
+ msg.hss_port = port->id;
|
|
+ msg.data16a = HDLC_MAX_MRU;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_SET_PKT_RX_SIZE") != 0))
|
|
+ goto err_plat_close;
|
|
+
|
|
+ if ((err = request_hdlc_queues(port)) != 0)
|
|
+ goto err_plat_close;
|
|
+
|
|
+ if ((err = init_hdlc_queues(port)) != 0)
|
|
+ goto err_destroy_queues;
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_FLOW_ENABLE;
|
|
+ msg.hss_port = port->id;
|
|
+ if ((err = npe_send_message(npe, &msg, "HSS_ENABLE_PKT_PIPE") != 0))
|
|
+ goto err_destroy_queues;
|
|
+
|
|
+ /* Populate queues with buffers, no failure after this point */
|
|
+ for (i = 0; i < TX_DESCS; i++)
|
|
+ queue_put_desc(port->plat->txreadyq,
|
|
+ tx_desc_phys(port, i), tx_desc_ptr(port, i));
|
|
+
|
|
+ for (i = 0; i < RX_DESCS; i++)
|
|
+ queue_put_desc(queue_ids[port->id].rxfree,
|
|
+ rx_desc_phys(port, i), rx_desc_ptr(port, i));
|
|
+
|
|
+ netif_start_queue(dev);
|
|
+
|
|
+ qmgr_set_irq(queue_ids[port->id].rx, QUEUE_IRQ_SRC_NOT_EMPTY,
|
|
+ hss_hdlc_rx_irq, dev);
|
|
+
|
|
+ qmgr_set_irq(queue_ids[port->id].txdone, QUEUE_IRQ_SRC_NOT_EMPTY,
|
|
+ hss_hdlc_txdone_irq, dev);
|
|
+ qmgr_enable_irq(queue_ids[port->id].txdone);
|
|
+
|
|
+ ports_open++;
|
|
+ netif_rx_schedule(dev); /* we may already have RX data, enables IRQ */
|
|
+ return 0;
|
|
+
|
|
+err_destroy_queues:
|
|
+ destroy_hdlc_queues(port);
|
|
+ release_hdlc_queues(port);
|
|
+err_plat_close:
|
|
+ if (port->plat->close)
|
|
+ port->plat->close(port->id, port->netdev);
|
|
+err_hdlc_close:
|
|
+ hdlc_close(dev);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int hss_hdlc_close(struct net_device *dev)
|
|
+{
|
|
+ struct port *port = dev_to_port(dev);
|
|
+ struct npe *npe = port->npe;
|
|
+ struct msg msg;
|
|
+ int buffs = RX_DESCS; /* allocated RX buffers */
|
|
+ int i;
|
|
+
|
|
+ ports_open--;
|
|
+ qmgr_disable_irq(queue_ids[port->id].rx);
|
|
+ netif_stop_queue(dev);
|
|
+
|
|
+ memset(&msg, 0, sizeof(msg));
|
|
+ msg.cmd = PKT_PIPE_FLOW_DISABLE;
|
|
+ msg.hss_port = port->id;
|
|
+ if (npe_send_message(npe, &msg, "HSS_DISABLE_PKT_PIPE")) {
|
|
+ printk(KERN_CRIT "HSS-%i: unable to stop HDLC flow\n",
|
|
+ port->id);
|
|
+ /* The upper level would ignore the error anyway */
|
|
+ }
|
|
+
|
|
+ while (queue_get_desc(queue_ids[port->id].rxfree, port, 0) >= 0)
|
|
+ buffs--;
|
|
+ while (queue_get_desc(queue_ids[port->id].rx, port, 0) >= 0)
|
|
+ buffs--;
|
|
+
|
|
+ if (buffs)
|
|
+ printk(KERN_CRIT "%s: unable to drain RX queue, %i buffer(s)"
|
|
+ " left in NPE\n", dev->name, buffs);
|
|
+
|
|
+ buffs = TX_DESCS;
|
|
+ while (queue_get_desc(queue_ids[port->id].tx, port, 1) >= 0)
|
|
+ buffs--; /* cancel TX */
|
|
+
|
|
+ i = 0;
|
|
+ do {
|
|
+ while (queue_get_desc(port->plat->txreadyq, port, 1) >= 0)
|
|
+ buffs--;
|
|
+ if (!buffs)
|
|
+ break;
|
|
+ } while (++i < MAX_CLOSE_WAIT);
|
|
+
|
|
+ if (buffs)
|
|
+ printk(KERN_CRIT "%s: unable to drain TX queue, %i buffer(s) "
|
|
+ "left in NPE\n", dev->name, buffs);
|
|
+#if DEBUG_CLOSE
|
|
+ if (!buffs)
|
|
+ printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
|
|
+#endif
|
|
+ qmgr_disable_irq(queue_ids[port->id].txdone);
|
|
+ destroy_hdlc_queues(port);
|
|
+ release_hdlc_queues(port);
|
|
+
|
|
+ if (port->plat->close)
|
|
+ port->plat->close(port->id, port->netdev);
|
|
+ hdlc_close(dev);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+
|
|
+static int hss_hdlc_attach(struct net_device *dev, unsigned short encoding,
|
|
+ unsigned short parity)
|
|
+{
|
|
+ struct port *port = dev_to_port(dev);
|
|
+
|
|
+ if (encoding != ENCODING_NRZ)
|
|
+ return -EINVAL;
|
|
+
|
|
+ switch(parity) {
|
|
+ case PARITY_CRC16_PR1_CCITT:
|
|
+ port->hdlc_cfg = 0;
|
|
+ return 0;
|
|
+
|
|
+ case PARITY_CRC32_PR1_CCITT:
|
|
+ port->hdlc_cfg = PKT_HDLC_CRC_32;
|
|
+ return 0;
|
|
+
|
|
+ default:
|
|
+ return -EINVAL;
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+static int hss_hdlc_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
+{
|
|
+ const size_t size = sizeof(sync_serial_settings);
|
|
+ sync_serial_settings new_line;
|
|
+ int clk;
|
|
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
|
|
+ struct port *port = dev_to_port(dev);
|
|
+
|
|
+ if (cmd != SIOCWANDEV)
|
|
+ return hdlc_ioctl(dev, ifr, cmd);
|
|
+
|
|
+ switch(ifr->ifr_settings.type) {
|
|
+ case IF_GET_IFACE:
|
|
+ ifr->ifr_settings.type = IF_IFACE_V35;
|
|
+ if (ifr->ifr_settings.size < size) {
|
|
+ ifr->ifr_settings.size = size; /* data size wanted */
|
|
+ return -ENOBUFS;
|
|
+ }
|
|
+ memset(&new_line, 0, sizeof(new_line));
|
|
+ new_line.clock_type = port->clock_type;
|
|
+ new_line.clock_rate = port->clock_rate;
|
|
+ new_line.loopback = port->loopback;
|
|
+ if (copy_to_user(line, &new_line, size))
|
|
+ return -EFAULT;
|
|
+ return 0;
|
|
+
|
|
+ case IF_IFACE_SYNC_SERIAL:
|
|
+ case IF_IFACE_V35:
|
|
+ if(!capable(CAP_NET_ADMIN))
|
|
+ return -EPERM;
|
|
+ if (dev->flags & IFF_UP)
|
|
+ return -EBUSY; /* Cannot change parameters when open */
|
|
+
|
|
+ if (copy_from_user(&new_line, line, size))
|
|
+ return -EFAULT;
|
|
+
|
|
+ clk = new_line.clock_type;
|
|
+ if (port->plat->set_clock)
|
|
+ clk = port->plat->set_clock(port->id, clk);
|
|
+
|
|
+ if (clk != CLOCK_EXT && clk != CLOCK_INT)
|
|
+ return -EINVAL; /* No such clock setting */
|
|
+
|
|
+ if (new_line.loopback != 0 && new_line.loopback != 1)
|
|
+ return -EINVAL;
|
|
+
|
|
+ port->clock_type = clk; /* Update settings */
|
|
+ port->clock_rate = new_line.clock_rate;
|
|
+ port->loopback = new_line.loopback;
|
|
+ return 0;
|
|
+
|
|
+ default:
|
|
+ return hdlc_ioctl(dev, ifr, cmd);
|
|
+ }
|
|
+}
|
|
+
|
|
+
|
|
+static int __devinit hss_init_one(struct platform_device *pdev)
|
|
+{
|
|
+ struct port *port;
|
|
+ struct net_device *dev;
|
|
+ hdlc_device *hdlc;
|
|
+ int err;
|
|
+
|
|
+ if ((port = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
|
|
+ return -ENOMEM;
|
|
+ platform_set_drvdata(pdev, port);
|
|
+ port->id = pdev->id;
|
|
+
|
|
+ if ((port->npe = npe_request(0)) == NULL) {
|
|
+ err = -ENOSYS;
|
|
+ goto err_free;
|
|
+ }
|
|
+
|
|
+ port->plat = pdev->dev.platform_data;
|
|
+ if ((port->netdev = dev = alloc_hdlcdev(port)) == NULL) {
|
|
+ err = -ENOMEM;
|
|
+ goto err_plat;
|
|
+ }
|
|
+
|
|
+ SET_MODULE_OWNER(net);
|
|
+ SET_NETDEV_DEV(dev, &pdev->dev);
|
|
+ hdlc = dev_to_hdlc(dev);
|
|
+ hdlc->attach = hss_hdlc_attach;
|
|
+ hdlc->xmit = hss_hdlc_xmit;
|
|
+ dev->open = hss_hdlc_open;
|
|
+ dev->poll = hss_hdlc_poll;
|
|
+ dev->stop = hss_hdlc_close;
|
|
+ dev->do_ioctl = hss_hdlc_ioctl;
|
|
+ dev->weight = 16;
|
|
+ dev->tx_queue_len = 100;
|
|
+ port->clock_type = CLOCK_EXT;
|
|
+ port->clock_rate = 2048000;
|
|
+
|
|
+ if (register_hdlc_device(dev)) {
|
|
+ printk(KERN_ERR "HSS-%i: unable to register HDLC device\n",
|
|
+ port->id);
|
|
+ err = -ENOBUFS;
|
|
+ goto err_free_netdev;
|
|
+ }
|
|
+ printk(KERN_INFO "%s: HSS-%i\n", dev->name, port->id);
|
|
+ return 0;
|
|
+
|
|
+err_free_netdev:
|
|
+ free_netdev(dev);
|
|
+err_plat:
|
|
+ npe_release(port->npe);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+err_free:
|
|
+ kfree(port);
|
|
+ return err;
|
|
+}
|
|
+
|
|
+static int __devexit hss_remove_one(struct platform_device *pdev)
|
|
+{
|
|
+ struct port *port = platform_get_drvdata(pdev);
|
|
+
|
|
+ unregister_hdlc_device(port->netdev);
|
|
+ free_netdev(port->netdev);
|
|
+ npe_release(port->npe);
|
|
+ platform_set_drvdata(pdev, NULL);
|
|
+ kfree(port);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct platform_driver drv = {
|
|
+ .driver.name = DRV_NAME,
|
|
+ .probe = hss_init_one,
|
|
+ .remove = hss_remove_one,
|
|
+};
|
|
+
|
|
+static int __init hss_init_module(void)
|
|
+{
|
|
+ if ((ixp4xx_read_feature_bits() &
|
|
+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
|
|
+ (IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
|
|
+ return -ENOSYS;
|
|
+ return platform_driver_register(&drv);
|
|
+}
|
|
+
|
|
+static void __exit hss_cleanup_module(void)
|
|
+{
|
|
+ platform_driver_unregister(&drv);
|
|
+}
|
|
+
|
|
+MODULE_AUTHOR("Krzysztof Halasa");
|
|
+MODULE_DESCRIPTION("Intel IXP4xx HSS driver");
|
|
+MODULE_LICENSE("GPL v2");
|
|
+module_init(hss_init_module);
|
|
+module_exit(hss_cleanup_module);
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/cpu.h
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/cpu.h
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/cpu.h
|
|
@@ -28,4 +28,19 @@ extern unsigned int processor_id;
|
|
#define cpu_is_ixp46x() ((processor_id & IXP4XX_PROCESSOR_ID_MASK) == \
|
|
IXP465_PROCESSOR_ID_VALUE)
|
|
|
|
+static inline u32 ixp4xx_read_feature_bits(void)
|
|
+{
|
|
+ unsigned int val = ~*IXP4XX_EXP_CFG2;
|
|
+ val &= ~IXP4XX_FEATURE_RESERVED;
|
|
+ if (!cpu_is_ixp46x())
|
|
+ val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
|
|
+
|
|
+ return val;
|
|
+}
|
|
+
|
|
+static inline void ixp4xx_write_feature_bits(u32 value)
|
|
+{
|
|
+ *IXP4XX_EXP_CFG2 = ~value;
|
|
+}
|
|
+
|
|
#endif /* _ASM_ARCH_CPU_H */
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/hardware.h
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/hardware.h
|
|
@@ -27,13 +27,13 @@
|
|
|
|
#define pcibios_assign_all_busses() 1
|
|
|
|
+/* Register locations and bits */
|
|
+#include "ixp4xx-regs.h"
|
|
+
|
|
#ifndef __ASSEMBLER__
|
|
#include <asm/arch/cpu.h>
|
|
#endif
|
|
|
|
-/* Register locations and bits */
|
|
-#include "ixp4xx-regs.h"
|
|
-
|
|
/* Platform helper functions and definitions */
|
|
#include "platform.h"
|
|
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
|
|
@@ -15,10 +15,6 @@
|
|
*
|
|
*/
|
|
|
|
-#ifndef __ASM_ARCH_HARDWARE_H__
|
|
-#error "Do not include this directly, instead #include <asm/hardware.h>"
|
|
-#endif
|
|
-
|
|
#ifndef _ASM_ARM_IXP4XX_H_
|
|
#define _ASM_ARM_IXP4XX_H_
|
|
|
|
@@ -607,4 +603,36 @@
|
|
|
|
#define DCMD_LENGTH 0x01fff /* length mask (max = 8K - 1) */
|
|
|
|
+/* "fuse" bits of IXP_EXP_CFG2 */
|
|
+#define IXP4XX_FEATURE_RCOMP (1 << 0)
|
|
+#define IXP4XX_FEATURE_USB_DEVICE (1 << 1)
|
|
+#define IXP4XX_FEATURE_HASH (1 << 2)
|
|
+#define IXP4XX_FEATURE_AES (1 << 3)
|
|
+#define IXP4XX_FEATURE_DES (1 << 4)
|
|
+#define IXP4XX_FEATURE_HDLC (1 << 5)
|
|
+#define IXP4XX_FEATURE_AAL (1 << 6)
|
|
+#define IXP4XX_FEATURE_HSS (1 << 7)
|
|
+#define IXP4XX_FEATURE_UTOPIA (1 << 8)
|
|
+#define IXP4XX_FEATURE_NPEB_ETH0 (1 << 9)
|
|
+#define IXP4XX_FEATURE_NPEC_ETH (1 << 10)
|
|
+#define IXP4XX_FEATURE_RESET_NPEA (1 << 11)
|
|
+#define IXP4XX_FEATURE_RESET_NPEB (1 << 12)
|
|
+#define IXP4XX_FEATURE_RESET_NPEC (1 << 13)
|
|
+#define IXP4XX_FEATURE_PCI (1 << 14)
|
|
+#define IXP4XX_FEATURE_ECC_TIMESYNC (1 << 15)
|
|
+#define IXP4XX_FEATURE_UTOPIA_PHY_LIMIT (3 << 16)
|
|
+#define IXP4XX_FEATURE_USB_HOST (1 << 18)
|
|
+#define IXP4XX_FEATURE_NPEA_ETH (1 << 19)
|
|
+#define IXP4XX_FEATURE_NPEB_ETH_1_TO_3 (1 << 20)
|
|
+#define IXP4XX_FEATURE_RSA (1 << 21)
|
|
+#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
|
|
+#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
|
|
+
|
|
+#define IXP4XX_FEATURE_IXP46X_ONLY (IXP4XX_FEATURE_ECC_TIMESYNC | \
|
|
+ IXP4XX_FEATURE_USB_HOST | \
|
|
+ IXP4XX_FEATURE_NPEA_ETH | \
|
|
+ IXP4XX_FEATURE_NPEB_ETH_1_TO_3 | \
|
|
+ IXP4XX_FEATURE_RSA | \
|
|
+ IXP4XX_FEATURE_XSCALE_MAX_FREQ)
|
|
+
|
|
#endif
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/npe.h
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/npe.h
|
|
@@ -0,0 +1,39 @@
|
|
+#ifndef __IXP4XX_NPE_H
|
|
+#define __IXP4XX_NPE_H
|
|
+
|
|
+#include <linux/kernel.h>
|
|
+
|
|
+extern const char *npe_names[];
|
|
+
|
|
+struct npe_regs {
|
|
+ u32 exec_addr, exec_data, exec_status_cmd, exec_count;
|
|
+ u32 action_points[4];
|
|
+ u32 watchpoint_fifo, watch_count;
|
|
+ u32 profile_count;
|
|
+ u32 messaging_status, messaging_control;
|
|
+ u32 mailbox_status, /*messaging_*/ in_out_fifo;
|
|
+};
|
|
+
|
|
+struct npe {
|
|
+ struct resource *mem_res;
|
|
+ struct npe_regs __iomem *regs;
|
|
+ u32 regs_phys;
|
|
+ int id;
|
|
+ int valid;
|
|
+};
|
|
+
|
|
+
|
|
+static inline const char *npe_name(struct npe *npe)
|
|
+{
|
|
+ return npe_names[npe->id];
|
|
+}
|
|
+
|
|
+int npe_running(struct npe *npe);
|
|
+int npe_send_message(struct npe *npe, const void *msg, const char *what);
|
|
+int npe_recv_message(struct npe *npe, void *msg, const char *what);
|
|
+int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
|
|
+int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
|
|
+struct npe *npe_request(int id);
|
|
+void npe_release(struct npe *npe);
|
|
+
|
|
+#endif /* __IXP4XX_NPE_H */
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/platform.h
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/platform.h
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/platform.h
|
|
@@ -77,8 +77,7 @@ extern unsigned long ixp4xx_exp_bus_size
|
|
|
|
/*
|
|
* The IXP4xx chips do not have an I2C unit, so GPIO lines are just
|
|
- * used to
|
|
- * Used as platform_data to provide GPIO pin information to the ixp42x
|
|
+ * used as platform_data to provide GPIO pin information to the ixp42x
|
|
* I2C driver.
|
|
*/
|
|
struct ixp4xx_i2c_pins {
|
|
@@ -86,6 +85,27 @@ struct ixp4xx_i2c_pins {
|
|
unsigned long scl_pin;
|
|
};
|
|
|
|
+#define IXP4XX_ETH_NPEA 0x00
|
|
+#define IXP4XX_ETH_NPEB 0x10
|
|
+#define IXP4XX_ETH_NPEC 0x20
|
|
+
|
|
+/* Information about built-in Ethernet MAC interfaces */
|
|
+struct eth_plat_info {
|
|
+ u8 phy; /* MII PHY ID, 0 - 31 */
|
|
+ u8 rxq; /* configurable, currently 0 - 31 only */
|
|
+ u8 txreadyq;
|
|
+ u8 hwaddr[6];
|
|
+};
|
|
+
|
|
+/* Information about built-in HSS (synchronous serial) interfaces */
|
|
+struct hss_plat_info {
|
|
+ int (*set_clock)(int port, unsigned int clock_type);
|
|
+ int (*open)(int port, void *pdev,
|
|
+ void (*set_carrier_cb)(void *pdev, int carrier));
|
|
+ void (*close)(int port, void *pdev);
|
|
+ u8 txreadyq;
|
|
+};
|
|
+
|
|
/*
|
|
* This structure provide a means for the board setup code
|
|
* to give information to th pata_ixp4xx driver. It is
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/qmgr.h
|
|
===================================================================
|
|
--- /dev/null
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/qmgr.h
|
|
@@ -0,0 +1,126 @@
|
|
+/*
|
|
+ * Copyright (C) 2007 Krzysztof Halasa <khc@pm.waw.pl>
|
|
+ *
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
|
+ * under the terms of version 2 of the GNU General Public License
|
|
+ * as published by the Free Software Foundation.
|
|
+ */
|
|
+
|
|
+#ifndef IXP4XX_QMGR_H
|
|
+#define IXP4XX_QMGR_H
|
|
+
|
|
+#include <linux/io.h>
|
|
+#include <linux/kernel.h>
|
|
+
|
|
+#define HALF_QUEUES 32
|
|
+#define QUEUES 64 /* only 32 lower queues currently supported */
|
|
+#define MAX_QUEUE_LENGTH 4 /* in dwords */
|
|
+
|
|
+#define QUEUE_STAT1_EMPTY 1 /* queue status bits */
|
|
+#define QUEUE_STAT1_NEARLY_EMPTY 2
|
|
+#define QUEUE_STAT1_NEARLY_FULL 4
|
|
+#define QUEUE_STAT1_FULL 8
|
|
+#define QUEUE_STAT2_UNDERFLOW 1
|
|
+#define QUEUE_STAT2_OVERFLOW 2
|
|
+
|
|
+#define QUEUE_WATERMARK_0_ENTRIES 0
|
|
+#define QUEUE_WATERMARK_1_ENTRY 1
|
|
+#define QUEUE_WATERMARK_2_ENTRIES 2
|
|
+#define QUEUE_WATERMARK_4_ENTRIES 3
|
|
+#define QUEUE_WATERMARK_8_ENTRIES 4
|
|
+#define QUEUE_WATERMARK_16_ENTRIES 5
|
|
+#define QUEUE_WATERMARK_32_ENTRIES 6
|
|
+#define QUEUE_WATERMARK_64_ENTRIES 7
|
|
+
|
|
+/* queue interrupt request conditions */
|
|
+#define QUEUE_IRQ_SRC_EMPTY 0
|
|
+#define QUEUE_IRQ_SRC_NEARLY_EMPTY 1
|
|
+#define QUEUE_IRQ_SRC_NEARLY_FULL 2
|
|
+#define QUEUE_IRQ_SRC_FULL 3
|
|
+#define QUEUE_IRQ_SRC_NOT_EMPTY 4
|
|
+#define QUEUE_IRQ_SRC_NOT_NEARLY_EMPTY 5
|
|
+#define QUEUE_IRQ_SRC_NOT_NEARLY_FULL 6
|
|
+#define QUEUE_IRQ_SRC_NOT_FULL 7
|
|
+
|
|
+struct qmgr_regs {
|
|
+ u32 acc[QUEUES][MAX_QUEUE_LENGTH]; /* 0x000 - 0x3FF */
|
|
+ u32 stat1[4]; /* 0x400 - 0x40F */
|
|
+ u32 stat2[2]; /* 0x410 - 0x417 */
|
|
+ u32 statne_h; /* 0x418 - queue nearly empty */
|
|
+ u32 statf_h; /* 0x41C - queue full */
|
|
+ u32 irqsrc[4]; /* 0x420 - 0x42F IRC source */
|
|
+ u32 irqen[2]; /* 0x430 - 0x437 IRQ enabled */
|
|
+ u32 irqstat[2]; /* 0x438 - 0x43F - IRQ access only */
|
|
+ u32 reserved[1776];
|
|
+ u32 sram[2048]; /* 0x2000 - 0x3FFF - config and buffer */
|
|
+};
|
|
+
|
|
+void qmgr_set_irq(unsigned int queue, int src,
|
|
+ void (*handler)(void *pdev), void *pdev);
|
|
+void qmgr_enable_irq(unsigned int queue);
|
|
+void qmgr_disable_irq(unsigned int queue);
|
|
+
|
|
+/* request_ and release_queue() must be called from non-IRQ context */
|
|
+int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
|
|
+ unsigned int nearly_empty_watermark,
|
|
+ unsigned int nearly_full_watermark);
|
|
+void qmgr_release_queue(unsigned int queue);
|
|
+
|
|
+
|
|
+static inline void qmgr_put_entry(unsigned int queue, u32 val)
|
|
+{
|
|
+ extern struct qmgr_regs __iomem *qmgr_regs;
|
|
+ __raw_writel(val, &qmgr_regs->acc[queue][0]);
|
|
+}
|
|
+
|
|
+static inline u32 qmgr_get_entry(unsigned int queue)
|
|
+{
|
|
+ extern struct qmgr_regs __iomem *qmgr_regs;
|
|
+ return __raw_readl(&qmgr_regs->acc[queue][0]);
|
|
+}
|
|
+
|
|
+static inline int qmgr_get_stat1(unsigned int queue)
|
|
+{
|
|
+ extern struct qmgr_regs __iomem *qmgr_regs;
|
|
+ return (__raw_readl(&qmgr_regs->stat1[queue >> 3])
|
|
+ >> ((queue & 7) << 2)) & 0xF;
|
|
+}
|
|
+
|
|
+static inline int qmgr_get_stat2(unsigned int queue)
|
|
+{
|
|
+ extern struct qmgr_regs __iomem *qmgr_regs;
|
|
+ return (__raw_readl(&qmgr_regs->stat2[queue >> 4])
|
|
+ >> ((queue & 0xF) << 1)) & 0x3;
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_empty(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_EMPTY);
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_nearly_empty(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_EMPTY);
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_nearly_full(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_NEARLY_FULL);
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_full(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat1(queue) & QUEUE_STAT1_FULL);
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_underflow(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_UNDERFLOW);
|
|
+}
|
|
+
|
|
+static inline int qmgr_stat_overflow(unsigned int queue)
|
|
+{
|
|
+ return !!(qmgr_get_stat2(queue) & QUEUE_STAT2_OVERFLOW);
|
|
+}
|
|
+
|
|
+#endif
|
|
Index: linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
|
|
===================================================================
|
|
--- linux-2.6.23.17.orig/include/asm-arm/arch-ixp4xx/uncompress.h
|
|
+++ linux-2.6.23.17/include/asm-arm/arch-ixp4xx/uncompress.h
|
|
@@ -13,7 +13,7 @@
|
|
#ifndef _ARCH_UNCOMPRESS_H_
|
|
#define _ARCH_UNCOMPRESS_H_
|
|
|
|
-#include <asm/hardware.h>
|
|
+#include "ixp4xx-regs.h"
|
|
#include <asm/mach-types.h>
|
|
#include <linux/serial_reg.h>
|
|
|