30cc7f3510
This increases the SPI frequency for both ASUS RT-AC51U and RT-AC54U. Speed comparison tests have been performed on RT-AC54U: - 10Mhz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 4m 37.78s user 0m 0.02s sys 2m 43.92s - 50Mhz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 28.34s user 0m 0.03s sys 0m 46.96s - 50Mhz fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 11.94s user 0m 0.01s sys 0m 46.94s - 80Mhz root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 12.31s user 0m 0.04s sys 0m 46.96s - 80Mhz fast read root@OpenWrt:~# time cat /dev/mtd* > /dev/null real 1m 12.15s user 0m 0.02s sys 0m 46.97s Based on that, we took 50 MHz with fast-read, as higher frequencies didn't yield further improvements. For the RT-AC51U, only the final configuration was tested. Tested-by: Zhijun You <hujy652@gmail.com> [RT-AC54U] Tested-by: Davide Fioravanti <pantanastyle@gmail.com> [RT-AC51U] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
98 lines
1.3 KiB
Plaintext
98 lines
1.3 KiB
Plaintext
#include "mt7620a.dtsi"
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
/ {
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_RESTART>;
|
|
};
|
|
|
|
wps {
|
|
label = "wps";
|
|
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WPS_BUTTON>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
|
|
spi-max-frequency = <50000000>;
|
|
m25p,fast-read;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "u-boot";
|
|
reg = <0x0 0x30000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@30000 {
|
|
label = "u-boot-env";
|
|
reg = <0x30000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
factory: partition@40000 {
|
|
label = "factory";
|
|
reg = <0x40000 0x10000>;
|
|
read-only;
|
|
};
|
|
|
|
partition@50000 {
|
|
compatible = "denx,uimage";
|
|
label = "firmware";
|
|
reg = <0x50000 0xfb0000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&gpio0 {
|
|
enable-leds {
|
|
gpio-hog;
|
|
line-name = "enable-leds";
|
|
output-low;
|
|
gpios = <10 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&gpio3 {
|
|
status = "okay";
|
|
};
|
|
|
|
ðernet {
|
|
mediatek,portmap = "wllll";
|
|
};
|
|
|
|
&wmac {
|
|
ralink,mtd-eeprom = <&factory 0x0>;
|
|
};
|
|
|
|
&pcie {
|
|
status = "okay";
|
|
};
|