Openwrt/target/linux/ipq806x/patches/0167-clk-qcom-Add-HFPLL-driver.patch
John Crispin 3c1f6e358d ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334
2014-08-30 09:32:58 +00:00

163 lines
4.7 KiB
Diff

From 49134da893bc11e833e3d87139c57e3b84e65219 Mon Sep 17 00:00:00 2001
From: Stephen Boyd <sboyd@codeaurora.org>
Date: Thu, 19 Jun 2014 18:46:31 -0700
Subject: [PATCH 167/182] clk: qcom: Add HFPLL driver
On some devices (MSM8974 for example), the HFPLLs are
instantiated within the Krait processor subsystem as separate
register regions. Add a driver for these PLLs so that we can
provide HFPLL clocks for use by the system.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
---
drivers/clk/qcom/Kconfig | 8 ++++
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/hfpll.c | 110 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 119 insertions(+)
create mode 100644 drivers/clk/qcom/hfpll.c
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index cfaa54c..de8ba31 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -53,3 +53,11 @@ config MSM_MMCC_8974
Support for the multimedia clock controller on msm8974 devices.
Say Y if you want to support multimedia devices such as display,
graphics, video encode/decode, camera, etc.
+
+config QCOM_HFPLL
+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
+ depends on COMMON_CLK_QCOM
+ help
+ Support for the high-frequency PLLs present on Qualcomm devices.
+ Say Y if you want to support CPU frequency scaling on devices
+ such as MSM8974, APQ8084, etc.
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 93fd03f..d0d8e3d 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_MSM_GCC_8960) += gcc-msm8960.o
obj-$(CONFIG_MSM_GCC_8974) += gcc-msm8974.o
obj-$(CONFIG_MSM_MMCC_8960) += mmcc-msm8960.o
obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8974.o
+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/hfpll.c b/drivers/clk/qcom/hfpll.c
new file mode 100644
index 0000000..701a377
--- /dev/null
+++ b/drivers/clk/qcom/hfpll.c
@@ -0,0 +1,110 @@
+/*
+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regmap.h>
+
+#include "clk-regmap.h"
+#include "clk-hfpll.h"
+
+static const struct hfpll_data hdata = {
+ .mode_reg = 0x00,
+ .l_reg = 0x04,
+ .m_reg = 0x08,
+ .n_reg = 0x0c,
+ .user_reg = 0x10,
+ .config_reg = 0x14,
+ .config_val = 0x430405d,
+ .status_reg = 0x1c,
+ .lock_bit = 16,
+
+ .user_val = 0x8,
+ .user_vco_mask = 0x100000,
+ .low_vco_max_rate = 1248000000,
+ .min_rate = 537600000UL,
+ .max_rate = 2900000000UL,
+};
+
+static const struct of_device_id qcom_hfpll_match_table[] = {
+ { .compatible = "qcom,hfpll" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
+
+static struct regmap_config hfpll_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+ .max_register = 0x30,
+ .fast_io = true,
+};
+
+static int qcom_hfpll_probe(struct platform_device *pdev)
+{
+ struct clk *clk;
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ void __iomem *base;
+ struct regmap *regmap;
+ struct clk_hfpll *h;
+ struct clk_init_data init = {
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_ops_hfpll,
+ };
+
+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
+ 0, &init.name))
+ return -ENODEV;
+
+ h->d = &hdata;
+ h->clkr.hw.init = &init;
+ spin_lock_init(&h->lock);
+
+ clk = devm_clk_register_regmap(&pdev->dev, &h->clkr);
+
+ return PTR_ERR_OR_ZERO(clk);
+}
+
+static struct platform_driver qcom_hfpll_driver = {
+ .probe = qcom_hfpll_probe,
+ .driver = {
+ .name = "qcom-hfpll",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_hfpll_match_table,
+ },
+};
+module_platform_driver(qcom_hfpll_driver);
+
+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:qcom-hfpll");
--
1.7.10.4